• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.938-941
• /
• 2003

In this paper we develop an equipment which prevents vehicles from overheating their inside due to exposure to direct sunlight in summer. Overheating of inside vehicle may give rise to accidents, for instances, dying from suffocation, the deformation of its internal equipment and the explosion from the cracks of its internal parts etc.. The equipment is operated under no starting engine. We adjust the overheating of the inside vehicle by operating the equipment. This equipment checks the temperature of the inside vehicle using temperature sensor. If the temperature increases more than reference temperature(a condition which can be given by the driver), the equipment will operate until the temperature of the inside decreases to the given temperature. Its power is obtained from solar cell. So the equipment keeps away overheating accidents as well as provides the drivers with optimized condition. And also it increases the ability of original car battery through solar cell.

• Journal of Distribution Science
• /
• v.12 no.7
• /
• pp.63-75
• /
• 2014

Purpose - This study analyzes topics discussed in the International Journal of Consumer Studies through a content analysis, to reveal the impact of cross-cultural management in consumer research. Research Design, Data, and Methodology - The International Journal of Consumer Studies has the highest impact factor among international consumer journals, and was chosen for research. This study investigated 712 articles, covering a ten-year period. Results - A total of 82 articles were found to be related to cross-cultural management, out of 712 articles. This shows a need for improvement in the area of cross-cultural management, and implies that the discipline of cross-cultural management will continue to have a significant impact on consumer studies. Conclusions - While content analyses have been conducted in the area of consumer research in the past, a comparative content analysis in the International Journal of Consumer Studies is unprecedented. This study offers insights on the comparative analysis of general articles and articles related to cross-cultural management, which will be useful reference points for future global markets and fields in distribution and consumer research.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.4 no.1
• /
• pp.5-15
• /
• 2016

With vigorous development of global network community, smart phones and mobile devices, enterprises can rapidly collect various kinds of data from internal and external environments. How to discover valuable information and transform it into new business opportunities from big data which grow rapidly is an extremely important issue for current enterprises. This study treats Company S as the subject and tries to find the factors of big data application in enterprises by a modified Decision Making Trial and Evaluation Laboratory (DEMATEL) and perceived benefits - perceived barriers relation matrix as reference for big data application and management of managers or marketing personnel in other organizations or related industry.

• Genomics & Informatics
• /
• v.17 no.4
• /
• pp.46.1-46.7
• /
• 2019

The implications of germline de novo variants (DNVs) in diseases are well documented. Despite extensive research, inconsistencies between studies remain a challenge, and the distribution and genetic characteristics of DNVs need to be precisely evaluated. To address this issue at the whole-genome scale, a large number of DNVs identified from the whole-genome sequencing of 1,902 healthy trios (i.e., parents and progeny) from the Simons Foundation for Autism Research Initiative study and 20 healthy Korean trios were analyzed. These apparently nonpathogenic DNVs were enriched in functional elements of the genome but relatively depleted in regions of common copy number variants, implying their potential function as triggers of evolution even in healthy groups. No strong mutational hotspots were identified. The pathogenicity of the DNVs was not strongly elevated, reflecting the health status of the cohort. The mutational signatures were consistent with previous studies. This study will serve as a reference for future DNV studies.

• Transactions of Materials Processing
• /
• v.8 no.1
• /
• pp.101-107
• /
• 1999

The upset forging stage is the initial work in the forging process. It is used to remove the segregation and cavities of the ingot. Specially in handling large sized ingot, an improper upset forging can cause serious surface tearing. However, there is no detail reference for stable upset forging work. To resolve this difficulty, we studied several factors such as upset forging time, temperature varation of ingot, damage, load and stain rate etc., by using the rigid-plastic finite element approach available in the DEFORM code. Numerical simulation results indicated that: the load value of upset forging works shows severe decreasing trend at a certain point, same as strain rate. Also defects were found to be concentrated around the upper and lower portions of the ingot. With these results, we can estimate a guideline for stable upset forging work.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.963-966
• /
• 2001

The wideband DS-CDMA (W-CDMA) system is one of the candidates for the next generation mobile communication system known as IMT-2000. The important concept of W-CDMA is the introduction of intercell asynchronous operation. In this paper, we design and analyze the system level simulator for the International Mobile Tele communication - 2000 (IMT-2000) 3-rd generation partnership project (3GPP) system. We confirm how the simulator works by BER over different Eb/NO. This study will be expected to use as reference data in the development of asynchronous IMT-2000. In this paper, we analyze a physical layer of W-CDMA system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance in Rayleigh fading channel environment. This study will be useful in the analysis and design of W-CDMA system.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2040-2042
• /
• 1997

A voltage source PWM converter based on lossless resonator and a source current control system are proposed in this paper. It is proved that steady-state deviation reduces to zero from the transfer function of source current control system, owing to the lossless resonator. The system can be controlled by the feedback control only, because of no need to use a feedforward control in the proposed a source current control system. Therefore, as using lossless resonator, control system can be simply made up. Simulations are described in the case of difference between source current and source current reference.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.84-89
• /
• 2003

Standard Operating procedures (SOPs) provide a degree of assurance that an operation will be performed consistently by different people and also consistently by the same person at different times. An SOP is a written set of instructions that someone should follow to complete a job safely, with no adverse effect on personal health or the environment, and in a way that maximizes operational and production requirements. Basic categories of SOPs include purpose, scope, reference document, definition, responsibility, procedure, and so on. In this work, we introduce SOPs for bioprocess.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.91-97
• /
• 2001

These Study are for the development of the reliability assessment test code and test equipment and test procedures of the heavy sluice gate hydraulic cylinder. Because there is no reliability test code for the heavy sluice gate hydraulic cylinder inside and outside of the country, the modified reliability test code is made reference for the related existing standards like as ISO, JIS, MIL, TUV, DIN, KS and etc. In this study, the novel method is proposed to evaluate efficiency of the heavy sluice gate hydraulic cylinder on the loading conditions and established the conditions of the acceleration life test to reduce the testing time and cycles. The testing equipments for life test, lode operating test, high and low temperature test and salt spray test have been established for 8 month, and the reliability tests are accomplished. The test results of the heavy sluice gate hydraulic cylinder which is produced and tested initially in Korea are satisfied the durability life cycle on the using conditions.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.184-188
• /
• 2001

In this paper, a new fully digital control method for single-phase UPS inverter, which is based on the double control loop such as the outer voltage control loop and inner current control loop, is proposed. The inner current control loop is designed and implemented in the form of internal model control and takes the presence of computational time-delay into account. Therefore, this method provides an overshoot-free reference-to-output response. In the proposed scheme, the outer voltage control loop employing P controller with resonance model implemented by a DSP is introduced. The proposed resonance model has an infinite gain at resonant frequency, and it exhibits a function similar to an integrator for AC component. Thus the outer voltage control loop causes no steady state error as regard to both magnitude and phase. The effectiveness of the proposed control system has been demonstrated by the simulation and experimental results respectively.