• Journal of Technologic Dentistry
• /
• v.40 no.4
• /
• pp.209-215
• /
• 2018

Purpose: The purpose of this study was to evaluate the clinical acceptability of the marginal and internal gap of Co-Cr metal copings fabricated with stereolithography (SLA). Methods: Titanium master dies were milled after scanning of the prepared tooth (n=30). For group I, Co-Cr metal copings were made from conventional lost-wax technique(LWT, n=10). For group II, the master dies were scanned and designed with CAD system. Then, metal copings were milled with Co-Cr(SUB, n=10). For group III(ADD, n=10), the scanning and design procedures were same as group II and burn-out resins were fabricated with SLA device. The marginal and internal discrepancies were measured under an optical microscope(100x) on ten reference points and were statistically analyzed with one-way ANOVA(${\alpha}=.05$). Results: The mean total discrepancies were $53.76{\pm}12.42{\mu}m$ in the LWT group and $69.82{\pm}15.48{\mu}m$ in the ADD group. The SUB group showed the largest total mean value $110.33{\pm}13.77{\mu}m$. There was statistically significant difference between the SUB and the other groups(P<0.05). Conclusion : Co-Cr metal copings fabricated with SLA technology showed clinically acceptable value on marginal and internal gap and there was no statistically significant difference between conventional lost-wax technique and SLA.

• Progress in Medical Physics
• /
• v.29 no.4
• /
• pp.137-142
• /
• 2018

This study aimed to evaluate and verify a process for correcting the extended source-to-imager distance (SID) in portal dosimetry (PD). In this study, eight treatment plans (four volumetric modulated arc therapy and four intensity-modulated radiation therapy plans) at different treatment sites and beam energies were selected for measurement. A Varian PD system with portal dose image prediction (PDIP) was used for the measurement and verification. To verify the integrity of the plan, independent measurements were performed with the MapCHECK device. The predicted and measured fluence were evaluated using the gamma passing rate. The output ratio was defined as the ratio of the absolute dose of the reference SID (100 cm) to that of each SID (120 cm or 140 cm). The measured fluence for each SID was absolutely and relatively compared. The average SID output ratios were 0.687 and 0.518 for 120 SID and 140 SID, respectively; the ratio showed less than 1% agreement with the calculation obtained by using the inverse square law. The resolution of the acquired EPIDs were 0.336, 0.280, and 0.240 for 100, 120, and 140 SID, respectively. The gamma passing rates with PD and MapCHECK exceeded 98% for all treatment plans and SIDs. When autoalignment was performed in PD, the X-offset showed no change, and the Y-offset decreased with increasing SID. The PD-generated PDIP can be used for extended SID without additional correction.

• Journal of Environmental Health Sciences
• /
• v.45 no.4
• /
• pp.326-339
• /
• 2019

Objectives: Minamata disease was an environmental health disaster of worldwide notoriety that occurred in Japan. The acknowledged patients total roughly 3,000, and the relieved victims currently include 77,099 cases. Still, many cases await acknowledgment or relief. The humidifier disinfectant issue is an environmental health catastrophe that took place in Korea. Over 9.98 million products spanning 43 brands of humidifier disinfectant have been sold and 835, cases have been recognized to date as relevant victims by the government. So far, 2,144 cases have been relieved by the fund of the producing companies. Four million consumers and 560,000 victims are estimated. Finding hints as to how to develop solutions in terms of fact-finding and prevention are the objectives of this study. Methods: Fields visits, interviews, and workshops as well as reference reviews have been conducted. A comparison was attempted to show the similarities and differences between the two disasters on 38 items. Results: Apparent similarities in the two disasters are the failure of industrial safety measures and governmental safety systems as well as relief systems for the victims. No comprehensive investigation was performed for all of the affected areas in Japan and all of the consumers in Korea. Both governments have tried to hide the faults and responsibilities of the companies and minimize the scale of the victims. Only after the government was changed through a general election did the new governments apologize and attempt to find political and social solutions through special relief laws. Conclusions: Over the process of each event, in the beginning, debates took place regarding the cause and the heath damages involved. For both, medical and toxicological relations are the keys while afterward finding a social solution became the subsequent issue.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.2
• /
• pp.63-72
• /
• 2019

Wireless sensors are more favorable in measuring structural response compared to conventional sensors in terms of them being easier to use with no issues with cables and them being considerably cheaper. Previous tests have been conducted to analyze the performance of MEMS (Micro Electro Mechanical Systems) sensor in sinusoidal excitation tests. This paper analyzes the performance of in-built MEMS sensors in devices by comparing with an ICP sensor as the reference. Earthquake input amplitude excitation in shaking table tests was done. Results show that MEMS sensors are more accurate in measuring higher input amplitude measurements which range from 100gal to 250gal than at lower input amplitudes which range from 10gal to 50gal. This confirms the results obtained in previous sinusoidal tests. It was also seen that natural frequency results have lower error values which range from 0% to 3.92% in comparison to the response spectra results. This also confirms that in-built MEMS sensors in mobile devices are good at estimating natural frequency of structures. In addition, it was also seen that earthquake input amplitudes with more frequency contents (Gyeongju) had considerably higher error values than Pohang excitation tests which has less frequency contents.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.476-484
• /
• 2019

RFID yoking proof proves that a pair of tags is scanned at the same time. Since the tags scanned simultaneously by a single reader are adjacent to each other, the yoking proof is used in applications that need to check the physical proximity of tagged objects. Most of the yoking proof schemes require pre-knowledge on adjacent tags. If an error occurs in the process of collecting information about adjacent tags, all subsequent proofs will fail verification. However, there is no research that suggests specific methods for obtaining information about adjacent tags. In this study, I propose a tag proximity information acquisition scheme for a yoking proof. The proposed method consists of two steps: scanning area determination and scanning area verification. In the first step, the size and position of the area to scan tags is determined in consideration of position and transmission range of the tags. In the next step, whether tag scanning is performed within the scanning area or not is verified through reference tags of the fixed position. In analysis, I show that the determined scanning area assures acquisition of adjacent tag information and the scanning area verification detects deformation and deviation of the scanning area.

• The Korean Journal of Archival Studies
• /
• no.52
• /
• pp.277-313
• /
• 2017

With the enactment of regulations on confidential records management, the management of confidential records has become more important than ever. However, there remains no management method in the field of records management that takes the feature and values of confidential records into consideration. For this, this study processed electronically confidential records managed in a non-electronic environment. In addition, we developed a system that will allow public institutions to manage confidential records independently, that will prevent loss of information because of loss of or damage to the confidential records, and that can be used conveniently in the digital security environment of authorized users to establish a foundation for commercial management. In this study, we analyzed the system configuration requirements according to the international standard for the records management of a confidential records management system and system-related issues such as system design based on the analyzed requirements, system security and encryption, and metadata, the overall process of establishing and outputting secret management records and standard management.

• Quality Improvement in Health Care
• /
• v.24 no.2
• /
• pp.2-14
• /
• 2018

Purpose: The objective of this study was to report the incidence of falls in hospitals and analyze the risk factors for falls. Methods: This study used data on 1,216 patients who experienced falls from 2015 to 2017 during their hospitalization. The data was collected from the falls incident reports and patient' electronic medical record of hospital. Data were analyzed with descriptive statistics using Chi-square test, Fisher's exact test and multiple Poisson regression analysis with the SAS 9.4 Results: The incidence of falls was 1.38 per 1,000 patients days (2015), 1.81 per 1,000patients days (2016) and 1.99 per 1,000patients days (2017). The incidence of injury caused by falls (level III~V) was 0.05 per 1,000patients days (2015), 0.04 per 1,000patients days (2016) and 0.06 per 1,000patients days (2017). The largest number of falls occurred during night shift (42.5%), specifically in the patients' room (70.8%), and medical unit (66.0%). Average age of fallers was 69.1 years and 61.7% of them were older than 71 years. CCI and the patient's department have statistically significant differences in injury or injury levels from falls, but the integrated nursing care services had no significant difference in injury or injury levels from falls. Conclusion: The result of this study can be used as a reference for establishing a fall prevention strategy for hospitalized patients by presenting index values such as the fall rate.

• PNF and Movement
• /
• v.17 no.1
• /
• pp.93-101
• /
• 2019

Purpose: This study aimed to investigate lower extremity muscle activation to the variable weight shift on the affected side of patients with hemiplegia. Methods: Eighteen patients with chronic hemiplegia volunteered to participate in this study. All participants performed three types of weight shift (sideways, forward, and backward) in limits of stability on the affected side. Muscle activation in a paralyzed leg was measured with electromyography on the gluteus medius, tensor fasciae latae, rectus femoris, and biceps femoris; furthermore, the attached area was recommended by SENIAM projects. Each weight shift was performed three times, and then the mean value of the three measurements was analyzed. The data were analyzed by measuring the symmetrically standing position with the reference voluntary contraction (RVC) and was standardized with the percentage of RVC method. Results: No significant difference in lower extremity muscle activation occurred according to the three types of variable weight shift. However, significant differences in lower extremity muscle activation did occur with each weight shift position. In addition, activation increased at the rectus femoris and decreased at the gluteus medius and tensor fasciae latae. Conclusion: Hip abductor muscle strength training and variable weight shifts on the affected side must increase to improve patients'balance and limits of stability.

• Yonsei Medical Journal
• /
• v.59 no.9
• /
• pp.1115-1122
• /
• 2018

Purpose: To investigate biomechanical properties of the cornea using a dynamic Scheimpflug analyzer according to age. Materials and Methods: In this prospective, cross-sectional, observational study, participants underwent ophthalmic investigations including corneal biomechanical properties, keratometric values, intraocular pressure (IOP), and manifest refraction spherical equivalent (MRSE). We determined the relationship of biomechanical parameters and ocular/systemic variables (participant's age, MRSE, IOP, and mean keratometric values) by piecewise regression analysis, association of biomechanical parameters with variables by Spearman's correlation and stepwise multiple regression analyses, and reference intervals (RI) by the bootstrap method. Results: This study included 217 eyes of 118 participants (20-81 years of age). Piecewise regression analysis between Corvis-central corneal thickness (CCT) and participant's age revealed that the optimal cut-off value of age was 45 years. No clear breakpoints were detected between the corneal biomechanical parameters and MRSE, IOP, and mean keratometric values. Corneal velocity, deformation amplitude, radius, maximal concave power, Corvis-CCT, and Corvis-IOP exhibited correlations with IOP, regardless of age (all ages, 20-44 years, and over 44 years). With smaller deformation amplitude and corneal velocity as well as increased CorvisIOP and Corvis-CCT, IOP became significantly increased. We provided the results of determination of confidence interval from RI data using bootstrap method in three separate age groups (all ages, 20-44 years, and over 44 years). Conclusion: We demonstrated multiple corneal biomechanical parameters according to age, and reported that the corneal biomechanical parameters are influenced by IOP.

• Journal of Animal Science and Technology
• /
• v.63 no.5
• /
• pp.1169-1181
• /
• 2021

We investigated the comparative physicochemical attributes, oxidative stability, and microbial characteristics of 28 days dry-aged meat in between boneless sirloin (gluteus medius) and bone-in T-bone steaks (infraspinatus) muscles from Korean Native Hanwoo Steer (KNHS). Results reveal that regardless of the muscles, dry-aging increased protein content and water-holding capacity (WHC) (p < 0.05). Meat from infraspinatus-aged muscle led to darker meat with higher pH values than un-aged meat (p < 0.05). However, fat content, CIE a^*, and CIE b^* remained unchanged in both muscles at aging. At aged meat, thiobarbituric acid reactive substances (TBARS) values from bone-in infraspinatus muscle was 2.5-fold higher than boneless gluteus medius muscle (p < 0.05). Dry-aging led to an increase in the contents of total unsaturated fatty acids (UFAs), monounsaturated fatty acids (MUFAs), and UFA/saturated fatty acids (SFA) in both muscles (p < 0.05). Furthermore, gluteus medius aged muscle concentrated with olic acid (C18:1) compared to infraspinatus aged muscle. Irrespective of the muscles, dry-aging enhanced the total free amino acids (FAAs) as well as tasty, and bitter amino acid contents whereas decreased the tasty/bitter amino acids (p < 0.05). Aromatic amino acid, tryptophan that converted to serotonin was 2-fold higher in boneless gluteus medius muscle than bone-in infraspinatus muscle at pre and post aging processes (p < 0.05). Aged Infraspinatus muscle increased total bacteria (p < 0.05) while no salmonella spp. was detected in both muscles. Taken together, our study confirms that 28 days dry-aging profiling the quality characteristics of boneless sirloin (gluteus medius) and bone-in T-bone steaks (infraspinatus) distinctly while gluteus medius aged steak performs better owing to oxidative stability and functional compounds than infraspinatus aged steak.