• Economic and Environmental Geology
• /
• v.31 no.1
• /
• pp.31-43
• /
• 1998

A total of 469 granitic samples were collected from 44 sites in the Ulsan fault area, southeast Korea. According to the previous petrographic studies, the granitic rocks have been divided into four groups (Hornblende biotite granodiorite, Hornblende granite, Biotite granite and Alkali-feldspar granite). NRM intensities, values of low field magnetic susceptibility, and magnetic behaviors during stepwise demagnetization experiments suggest rather a three-fold classification: In this scheme, Hornblende granite and Biotite granite are grouped together, as they did not show any significant differences in magnetic characteristics. Based on the Ishihara (1979)'s criterion, Alkali-feldspar granite is classified as ilmenite-series granite, whereas others are classified as magnetite-series granite. In the eastern part of the study area including the Tertiary basin area, declinations of site-mean characteristic remanent magnetizations (ChRMs) show clockwise deflection of more than 30 from the reference direction of east Asia. Both along and in the adjacent region of the Ulsan fault-line, however, no deflection of remanent direction was observed. A boundary line between the deflected and undeflected site-mean ChRMs is defined in this study, which runs roughly parallel to the Ulsan fault-line at the distance of about 6km eastward from the fault-line. We suggest that this newly found boundary line, which we call Yonil tectonic line, released dextral simple shear stress acted in the southeastern part of the Korean peninsula during the opening stage of the East Sea in the Early Cenozoic.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.18.1-18.9
• /
• 2014

Objectives The purpose of this study was to determine a separation method for each arsenic metabolite in urine by using a high performance liquid chromatography (HPLC)-inductively coupled plasma-mass spectrometer (ICP-MS). Methods Separation of the arsenic metabolites was conducted in urine by using a polymeric anion-exchange (Hamilton PRP X-100, $4.6mm{\times}150mm$, $5{\mu}m$) column on Agilent Technologies 1260 Infinity LC system coupled to Agilent Technologies 7700 series ICP/MS equipment using argon as the plasma gas. Results All five important arsenic metabolites in urine were separated within 16 minutes in the order of arsenobetaine, arsenite, dimethylarsinate, monomethylarsonate and arsenate with detection limits ranging from 0.15 to $0.27{\mu}g/L$ ($40{\mu}L$ injection). We used G-EQUAS No. 52, the German external quality assessment scheme and standard reference material 2669, National Institute of Standard and Technology, to validate our analyses. Conclusions The method for separation of arsenic metabolites in urine was established by using HPLC-ICP-MS. This method contributes to the evaluation of arsenic exposure, health effect assessment and other bio-monitoring studies for arsenic exposure in South Korea.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.4
• /
• pp.27-43
• /
• 1990

This study aimed at developing a generalized model on the estimation of the long - term run - off volume for practical purpose. During the research period of last 3 years( 1986-1988), 3 types of estimation model on the long - term run - off volume(Effective rainfall model, unit hydrograph model and barne's model for dry season) had been developed by the author. In this study, through regressional analysis between determinant factors (bi of effective rainfall model, ai of unit hydrograph model and Wi of barne's model) and catchment characteris- tics(catchment area, distance round the catchment area, massing degree coefficient, river - exte- nsion, river - slope, river - density, infiltration of Watershed) of 11 test case areas by multiple regressional method, a new methodology on the derivation of determinant factors from catchment characteristics in the watershed areas having no hydrological station was developed. Therefore, in the resulting step, estimation equations on run - off volume for practical purpose of which input facor is only rainfall were developed. In the next stage, the derived equations were applied on the Kang - and Namgye - river catchment areas for checking of their goodness. The test results were as follows ; 1. In Kang - river area, average relative estimation errors of 72 hydrographs and of continuous daily run - off volume for 245 days( 1/5/1982 - 31/12) were calculated as 6.09%, 9.58% respectively. 2. In Namgye - river area, average relative estimation errors of 65 hydrographs and of conti- nuous daily run - off volume for 2fl days(5/4/1980-31/12) were 5.68%, 10.5% respectively. In both cases, relative estimation error was averaged as 7.96%, and so, the methodology in this study might be hetter organized than Kaziyama's formula when comparing with the relative error of the latter, 24~54%. However, two case studies cannot be the base materials enough for the full generalization of the model. So, in the future studies, many test case studies of this model should he carries out in the various catchment areas for making its generalization.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.431-436
• /
• 2009

As the telecommunication lines bring into widespread use, one of the most important aspects related to power distribution systems is effectively to evaluate the effect on the telecommunication lines from power lines. One of the efficient methods to evaluate the effect is to measure the induced voltage of a telecommunication line as a result of a ground-loop. If the power lines cause high induced voltage, the ground reference in the telecommunication lines is no longer a stable potential, so signals may ride on the noise. A ground loop is common wiring conditions where a ground current may take more than one path to return to the grounding electrode at the arrangement between the power lines and telecommunication lines. When a multi-path connection between the power lines and telecommunication line circuits exists, the resulting arrangement is known as a ground loop. Whenever a ground loop exists, there are potential for damages or abnormal operations of the telecommunication lines. The power lines can induce the voltage on the communication line. The effects can be calculated by considering the inductances and capacitances. However, if we assume that there are only power lines, it doesn't have a practical meaning because there are conductors with other purpose in the neighborhood of the lines. If we consider that case, we need more complex system. Therefore we suggest more complex system considering the conductors with other purpose in the neighborhood of the lines. The neutral wires and the overhead ground wires are considered for calculating the induced voltage. We assume that there are the messenger wires beside the power line as a result of increased use of them. The main purpose of this paper is a study on a shielding effect of messenger wires in the distribution lines. EMTP(Electro-Magnetic Transients Program) program is used for the induced voltage calculation.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.131-138
• /
• 2014

The purpose of this study is to examine spatial composition elements of the public sector through medium-sized first class urban hotels of Korea and Japan, the two countries with geopolitical closeness and high cultural and economic correlation, and to provide data needed for devising future urban hotel plans. The scope of this study included case studies on medium-sized first class urban hotels (10 urban hotels with concours composition type in the public sector) located in downtowns of Korea (5 hotels) and Japan (5 hotels). The study was conducted by analysis of drawing based on review of preceding studies and literature, and on-site survey. The results of survey and analysis on physical spatial elements shown in medium-sized urban hotels of Korea and Japan with concours composition type among composition types in the public sector are as follows. First, as a result of analyzing spatial elements of medium-sized urban hotels in the public sector, an in-depth checklist must be prepared with consideration on intimate correlation between elements to devise a construction spatial plan for urban hotel in the future. Second, as a result of comparatively analyzing area ratio for each function (public sector, sales sector and service sector) through area analysis on the lower floors of medium-sized urban hotels, reference data for planning were found in regards to spatial composition ratio of the public sector. Third, as a result of analyzing spatial elements of lobby hall and traffic line of visitors on the lower floors of medium-sized urban hotels in the public sector, there was a substantial difference between hotels of Korea and Japan.

• The Journal of Korean Medicine
• /
• v.38 no.4
• /
• pp.55-61
• /
• 2017

Objectives: In order to accurately measure skin moisture and accumulate normal skin moisture data, analyzing the uncertainty of the skin moisture measurement and establishing standard reference data is essential. It helps to evaluate the skin's condition and has great significance in diagnosis and treatment. In this study, the traceability of the equipment and the uncertainty of the results were analyzed for their potential use in the field of Korean medicine. The data was collected measuring skin moisture on the sole of the foot. Methods: One professional measured the moisture of the adult male's foot 10 times following a determined protocol. The standard uncertainty of repeated measurements was calculated from the mean value of 10 repeated measurements. Ten trainee participants also measured the adult male's foot following a determined protocol. The standard uncertainty by tester was calculated from the value of repeated measurements. Results: As a result of analyzing the difference between the mean and standard uncertainties in both the expert and trainees, it was confirmed that the variance in this study did not satisfy the normal distribution. In addition, the Mann-Whitney U-test was carried out, and it was found that there was no significant difference in the measured values of the two groups. The authorized uncertainty of measurements and traceability of all the equipment was not confirmed. Conclusions: This paper establishes the basis for later measurement-equipment research to provide the objective indicators to approach the dryness of plantar skin from dehydration, the Korean medicine perspective.

• Clinical and Experimental Pediatrics
• /
• v.54 no.2
• /
• pp.69-78
• /
• 2011

Purpose: The aim of this study was conducted to investigate the mean nRBC count in very low births weight infants (VLBWIs) and to determine the usefulness of the nRBC as an independent prognostic factors of perinatal complications in VLBWIs. Methods: This study was conducted on 112 VLBWIs who were hospitalized in the neonatal intensive care unit (NICU) of the author's hospital within the period from March 2003 to and May 2008. Based on the infants' nucleated red blood cells (nRBC) counts at birth, on the third day after birth, on the seventh day after birth, in the second week after birth, and in the fourth week after birth in the medical records, the correlation between nRBC or absolute nRBC counts with birth weight, gestational age, and other perinatal outcomes were retrospectively investigated. Results: In VLBWIs, their mean nRBC and absolute nRBC counts were showing a gradual decrease after birth, and they were consisteantly kept at low values since one week after and inversely proportional to the birth weights. The mean nRBC counts based on the stage after birth showed a significant correlation with perinatal death, necrotizing enterocolitis, and severe intraventricular hemorrhage. Conclusion: The increase in the nRBC count showed a significant correlation with having a severe intraventricular hemorrhage, necrotizing enterocolitis, and perinatal death in VLBWIs. If an increase or no decrease in the nRBC count after birth is observed, newborninfant care precautions should be required.

• Steel and Composite Structures
• /
• v.26 no.4
• /
• pp.485-499
• /
• 2018

In this paper, a hollow steel tube (HST) shear connector is proposed for use in a slim-floor system. The HST welded to a perforated steel beam web and embedded in concrete slab. A total of 10 push-out tests were conducted under static loading to investigate the mechanical behavior of the proposed HST connector. The variables were the shapes (circular, square and rectangular) and sizes of hollow steel tubes, and the compressive strength of the concrete. The failure mode was recorded as: concrete slab compressive failure under the steel tube and concrete tensile splitting failure, where no failure occurred in the HST. Test results show that the square shape HST in filled via concrete strength 40 MPa carried the highest shear load value, showing three times more than the reference specimens. It also recorded less slip behavior, and less compressive failure mode in concrete underneath the square hollow connector in comparison with the circular and rectangular HST connectors in both concrete strengths. The rectangular HST shows a 20% higher shear resistance with a longer width in the load direction in comparison with that in the smaller dimension. The energy absorption capacity values showed 23% and 18% improvements with the square HST rather than a headed shear stud when embedded in concrete strengths of 25 MPa and 40 MPa, respectively. Moreover, an analytical method was proposed and predicts the shear resistance of the HST shear connectors with a standard deviation of 0.14 considering the shape and size of the connectors.

• Geomechanics and Engineering
• /
• v.22 no.6
• /
• pp.541-552
• /
• 2020

With the increasing tension of current coal resources and the increasing depth of coal mining, the gob-side entry retaining technology has become a preferred coal mining method in underground coal mines. Among them, the technology of the gob-side entry retaining with the high-water filling material can not only improve the recovery rate of coal resources, but also reduce the amount of roadway excavation. In this paper, based on the characteristics of the high-water filling material, the technological process of gob-side entry retaining with the high-water filling material is introduced. The early and late stress states of the filling body formed by the high-water filling materials are analyzed and studied. Taking the 8th floor No.3 working face of Xin'an coal mine as engineering background, the stress and displacement of surrounding rock of roadway with different filling body width are analyzed through the FLAC^3D numerical simulation software. As the filling body width increases, the supporting ability of the filling body increases and the deformation of the surrounding rock decreases. According to the theoretical calculation and numerical simulation of the filling body width, the filling body width is finally determined to be 3.5m. Through the field observation, the deformation of the surrounding rock of the roadway is within the reasonable range. It is concluded that the gob-side entry retaining with the high-water filling material can control the deformation of the surrounding rock, which provides a reference for gob-side entry retaining technology with similar geological conditions.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.8
• /
• pp.1475-1481
• /
• 2008

B3 antibody specifically binds the $Lewis^Y$-related carbohydrate antigen of many carcinomas, and it is used as a model antibody in this study. In a previous study, the Fab fragment of the antibody was fused to a 38 kDa truncated form of Pseudomonas exotoxin A, PE38, to make Fab-PE38, where PE38 is fused to the Fd fragment of the Fab domain. This parent monomer molecule, Fab-PE38, had no cysteine in the hinge region, and it could not make a disulfide bond to form a disulfide bond bridged homodimer. In this study, we constructed three different kinds of divalent Fab-toxin fusion homodimers where the toxin is fused to the light chain of Fab, $(Fab-PE38fl)_2$. In addition to the PE38 toxin fused to the light chain, these three molecules have different hinge sequences hi, h2, and h3 making Fabh1-, Fabh2-, and Fabh3-PE38fl monomers, respectively. These hinges contain only one cysteine on different positions of the hinge sequence. The disulfide bond between the hinge region of two monomers forms homodimers $(Fabh1-PE38fl)_2$, $(Fabh2-PE38fl)_2$, and $(Fabh3-PE38fl)_2$. The refolding yields of these dimers were 5-16-fold higher than a previously constructed dimer where the PE38 was fused to the Fd fragment $(Fabh2-PE38)_2$ [8]. Our data suggest that the steric repulsion between the two PE38s in $(Fabh1-PE38)_2$ during disulfide bridge formation is relieved by fusing it at the end of the light chain. The best cytotoxicity value of these dimers showed about 2.5-fold higher on an MCF7 cell line than that of the monovalent reference molecule in ng/ml scale, which is 15-fold higher in pM scale.