• Korean Journal of Ecology and Environment
• /
• v.45 no.3
• /
• pp.271-277
• /
• 2012

The present study was conducted to assess the suitability of domestic natural waters as a Daphnia magna culture medium. In order to assess survival rate and reproductive output, young female daphnids (parent animals), aged less than 24 hours at the start of the test and produced in the Elendt M4 medium, were exposed to Elendt M4 medium, de-chlorinated tap water, and natural mineral water for 21 days. D. magna cultured in Elendt M4 medium (reference medium) and natural mineral water met the criteria of OECD No. 211, Daphnia magna Reproduction Test Guidelines in terms of percent adult survival, first day of reproduction, and average young production. However, the mortalities of adult daphnids observed in de-chlorinated tap water were more than 20% in two reproduction tests for 21 days. Mortality was observed on exposure days 13, 15, and 18 in de-chlorinated water. The use of D. magna is recommended in water of hardness >80 mg $CaCO_3\;L^{-1}$. However, the hardness of de-chlorinated tap water used in the present study was 50~53 mg $CaCO_3\;L^{-1}$. Therefore, it is judged that the delayed mortalities observed in de-chlorinated tap water were caused by a rapid decreased in hardness when the medium was changed from Elendt M4 to de-chlorinated tap water. When D. magna is cultured using domestic natural waters (underground water, surface water, and de-chlorinated water), the quality-control (QC) data should be maintained through a standardization for health assessment method, toxicity test method using reference chemical, test intervals of reference toxicant toxicity test, and data treatment and interpretation. In the long term, national research programs are needed for the development of test species which are representative of domestic aquatic environmental conditions among indigenous daphnids.

• Science of Emotion and Sensibility
• /
• v.23 no.2
• /
• pp.51-60
• /
• 2020

This study aimed to develop a modular smart clothing system for heart rate monitoring that reduces the inconvenience caused by battery charging and the large size of measurement devices. The heart rate monitoring system was modularized into a temporary device and a continuous device to enable heart rate monitoring depending on the requirement. The temporary device with near-field communication (NFC) and heart rate sensors was developed as a clothing attachment type that enables heart rate monitoring via smart phone tagging when required. The continuous device is based on Bluetooth Low Energy (BLE) communication and batteries and was developed to enable continuous heart rate measurement via a direct connection to the temporary device. Furthermore, the temporary device was configured to connect with a textile electrode made of a silver-based knitted fabric designed to be located below the pectoralis major muscle for heart rate measurement. Considering the user-experience factors, key functions, and the ease of use, we developed an application to automatically log through smart phone tagging to improve usability. To evaluate the accuracy of the heart rate measurement, we recorded the heart rate of 10 healthy male subjects with a modular smart clothing system and compared the results with the heart rate values measured by the Polar RS800. Consequently, the average heart rate value measured by the temporary system was 85.37, while that measured by the reference device was 87.03, corresponding to an accuracy of 96.73%. No significant difference was found in comparison with the reference device (T value = -1.892, p = .091). Similarly, the average heart rate measured by the continuous system was 86.00, while that measured by the reference device was 86.97, corresponding to an accuracy of 97.16%. No significant difference was found in terms of the heart rate value between the two signals (T value = 1.089, p = .304). The significance of this study is to develop and validate a modular clothing system that can measure heart rates according to the purpose of the user. The developed modular smart clothing system for heart rate monitoring enables dual product planning by reducing the price increase due to unnecessary functions.

• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.417-426
• /
• 2002

Inductively Coupled Plasma Dynamic Reaction Cell Quadrupole Mass Spectrometry (ICP-DRC-QMS) was characterized for the detection of the six naturally occurring calcium isotopes. The effect of the operating conditions of the DRC system was studied to get the best signal-to-noise ratio. This experiment shows that the potentially interfering ions such as $Ar^+$, ${CO_2}^+$, ${NO_2}^+$, $CNO^+$ at the calcium masses m/z 40, 42, 43, 44 and 48 were removed by flowing $NH_3$ gas at the rate of 0.7 mL/min $NH_3$ as reactive cell gas in the DRC with a RPq value (rejection parameter) of 0.6. The limits of detection for $^{40}Ca$, $^{42}Ca$, $^{43}Ca$, $^{44}Ca$, and $^{48}Ca$ were 1, 29, 169, 34, and 15 pg/mL, respectively. This method was applied to the determination of calcium in synthetic food digest samples (CCQM-P13) provided by LGC for international comparison. The isotope dilution method was used for the determination of calcium in the samples. The uncertainty evaluation was performed according to the ISO/GUM and EURACHEM guidelines. The determined mean concentration and its expanded uncertainty of calcium was ($66.4{\pm}1.2$) mg/kg. In order to assess our method, two reference samples, Riverine Water reference sample (NRCC SLRS-3) and Trace Elements in Water reference sample (NIST SRM 1643d), were analyzed.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.327-342
• /
• 2002

Soft tissue profile is a critical area of interest in the development of an orthodontic treatment and diagnosis. The purpose of this study was to determine the facial profile preference of diversified group and to investigate the relationship between most Preferred facial Profile and existing soft tissue reference lines. A survey instrument of constructed facial silhouettes was evaluated by 894 lay person. The silhouettes had varied nose, lips, chin and soft tissue subnasale point. Seven sets of facial type were computer-generated by an orthodontist to represent distinct facial types. The varied facial profiles were graded on the basis of most preferred to least preferred. Every facial profile were measured by soft tissue reference lines(Ricketts E-line, Burstone B-line) to observe the most preferred facial profile. The results as follows: 1. In reliability test, the childhood group showed lower value than other groups, which means that this group has no concern on facial profile preference. 2. It appears that sexual and age difference made no significant difference in selecting the profile 3. An agreement to least preferred facial profile was higher than an agreement to most preferred facial profile. 4. Coefficient of concordance (Kendall W) was higher in the twentieth group. It means that a profile preference of the twentieth is distinct. 5. A lip protrusion (to Ricketts E-line and Burstone B-line) of most preferred facial profile was similar to measurements of previous study that investigate skeletal and soft tissue of esthetic facial profile of young Korean. So these reference lines can be used valuably in clinics. 6. Profile of excessive lip protrusion or retrusion to E-line & B-line was least preferred. 7. Most preferred profile of all respondents group was straight profile. Profile that showing convex profile was not pre(erred and the least preferred profile was concave profile.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.477-484
• /
• 2017

This study was conducted to investigate the content of sulfur dioxide, carotenoids and the degree of contamination of Bacillus cereus in 33 kinds of dried sweet potato from domestic mainly dried agricultural products in Korea. According to the characteristics of dried sweet potato samples, it was classified into four clusters and as a result of analyzing the contents of sulfur dioxide, carotenoids and the degree of contamination B. cereus was no significant difference among the clusters. The detection ranges of residual sulfur dioxide from 33 dried sweet potatoes ranged from 0.38 to 28.16 mg/kg, three cases (9.09%) were detected at the reference level of 10 mg/kg or more. But no samples exceeding 30 mg/kg, the tolerance level of sulfur dioxide in dried sweet potatoes were detected. Since dried sweet potato does not have a standard for carotenoids, when comparing the national and international standards of carotenoids, the range of detection of carotenoids in dried sweet potato was $46{\sim}2,663{\mu}g$/100 g, which was within the reference range of $0{\sim}9,826{\mu}g$/100 g. In principle colonies suspected to be B. cereus in dried sweet potato were not detected. In 7 cases (21.21%), there were detected in the range of 0.05~1.59 log CFU/g but not more than 3 log CFU/g as the reference value. The results of this study are expected to be used as basic data to establish quality standard for dried sweet potatoes. In order to control the quality of dried sweet potatoes in domestic market, raw materials, drying method and packaging after distribution, it is necessary to maintain and maintain the process steadily.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.1
• /
• pp.1-4
• /
• 1997

This study was carried out to find out the source of nitrate-nitrogen (NO$_3$-N) contamination in the groundwater in Cheju Island. Among the sites which have exceeded or may exceed the criterion level (10 mg/L) of NO$_3$-N in drinking water, seven sampling sites including two reference sites were chosen. The former regions are mainly agricultural ones (A-1 to A-6) and residential (R). The latter regions are forest (F-1 and F-2). The predicted major source and its contribution to NO$_3$-N concentration at each site, using $\delta$$\^$15/N and NO$_3$-N concentration, were as follow; Those at A-1, R and F-1 was 61.1%, 50.0% and 20.0% to manure or domestic sewage, 27.8%, 45.7% and 40.0% to chemical fertilizers and 11.1%, 4.3% and 40.0% to natural soil, respectively. Those at A-2 to A-6 were 37.8%, 25.0%, 40.9%, 26.2% and 35.7% to manure or domestic sewage, 59.6%, 71.7%, 53.0%, 71.5% and 60.2% to chemical fertilizers and 2.6%, 3.3%, 6.1%, 2.3% and 4.1% to natural soil, respectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.200-211
• /
• 1995

This study was designed to evaluate the effects of temperature and humidity on the sampling efficiency of mixed organic vapors of l,2-DCE, benzene, and MIBK by 3 different types of diffusion monitors. Independent variables used for the study were temperatures ($25^{\circ}C$, $35^{\circ}C$), humidities (30%, 80%), and vapor concentrations (low, medium, and high). In addition, vapor concentrations measured by the traditional charcoal tube method were used as reference values and were compared with those of by diffusion monitors. The results were as follows: 1. The desorption efficiencies(DE) of 1,2-DCE and benzene from charcoal tubes and from diffusion monitors ranged from 98% to 105%. In contrast, the DEs of MIBK from charcoal tubes and diffusion monitors except DM1 ranged from 71% to 85%. The DE of MIBK from DM1 was 98%. 2. No statistically significant differences of 1,2-DCE concentrations and the sampling efficiencies regardless of temperatures and humidities studied between charcoal tube and 3 diffusion monitors were found. 3. At 80% humidity, increasing frequencies of 1,2-DCE breakthrough at higher temperature and higher vapor concentration measured by charcoal tubes were observed. 4. No statistically significant difference of benzene concentrations were found between charcoal tube and diffusion monitors except DM3. The sampling efficiencies of DM3 were statistically significantly lower at all experimental conditions except the $35^{\circ}C$ and 30% humidity condition. 5. No statistically significant difference of MIBK concentrations were found between charcoal tube and diffusion monitors except DM3. The sampling efficiencies of DM3 were statistically significantly higher at higher humidity conditions regardless of temperature. Although statistically not significant, sampling efficiency of MIBK showed positive correlation with humidity while negative correlation with concentration was observed. 6. For sampling 1,2-DCE and benzene, no significant variations of concentrations among three diffusion monitors regardless of temperature and humidity conditions were found. For MIBK sampling, however, wide variations with increasing humidity among diffusion monitors were obtained. In conclusion, this study suggests that diffusion monitors will be a reasonables substitute for the traditional charcoal tubes for sampling non-polar organic vapors at temperature and humidity conditions studied. For polar organic vapors, use of an alternative desorption solution other than CS2 is recommended because of its low desorption efficiency. In addition, since variable among diffusion monitors for polar organic vapors particularly at higher humidity conditions were observed, further study is recommended of the effects of humidity on the performance of diffusion monitors.

• Research in Community and Public Health Nursing
• /
• v.6 no.1
• /
• pp.98-113
• /
• 1995

The purpose of this study were two fold : first, to determine the effect of aerobic exercise on BP, pulse rate, body fat, body weight, symptoms of sterss response: and secondly, to apply the aerobic exercise on nursing practice in the healthy or ill subjects. In an attempt to investigate the physiological and psychological effect of exercise, a quasi -experiment, non-equivalent control group pre-test & post-test design was planned. Experiments were carried out from July 4, through August 30, 1994 with 37 subjects conveniently sampled from K & Y sports center located in Taejon. The 37 research subjects were assigned to experimental(16 subjects) and control(21 subjects) groups. Aerobic exercise was carried out for experimental group from three times to five times a week for 6 weeks in aerobic center. Data were analyzed with t-test, mean, per centage of change using SAS program. Results were obtained as follows: 1) Systolic blood pressure (M=123.75mmHg, % of change=1.12%) and diastolic blood pressure (M=74.38mmHg, % of change=5.79%) was increased on that of experimental group after 6 weeks experiment. But there was no significant difference between experimental group and control group. 2) Body weight was decreased on that of experimental group(M=56.54Kg, % of change=-1.60%) and that of control group(M=52.05, % of change=-0.99%) after 6 weeks. But there was no significant difference between experimental group and control group. 3) Body fat was decreased on that of experimental group(M=30.53%, % of change=-3.60%) and that of control group (M=28.75%, % of change=-3.52%) after 6 weeks. There was no significant difference between experimental group and control group. 4) Pulse rate was decreased on that of experimental group(M=69.19회/min, % of change -8.43%) and that of control group(M=76.0회/min, % change -0.07%) after 6weeks. There was significant difference(t=-2.621, P<0.05) between experimental group and control group. 5) Symptoms of stress response were decreased on that of experimental group(M=0.97) and that of control group(M=1.15) after 6 weeks. There was no significant difference between experimental group and control group. Therefore, adherence to aerobic exercise for 6 week seem to be affected mainly pulse rate of subjects. A futher study is necessary to determine the difference in the effect of variety exercise, programs, to study over 6 weeks, to produce professional educational program for exercise speciality nurses.

• Clinical and Experimental Reproductive Medicine
• /
• v.9 no.1_2
• /
• pp.29-41
• /
• 1982

This retrospective clinical study was done based under the delivery records of 146 cases of twin pregnancies in Yonsei University, Severance Hospital and Wonju Christian Hospital from 1977 through 1980 with particular interest in the second twins. Clinical factors, Apgar scores related to neonatal prognosis, and perinatal mortality rate were statistically analyzed and the following results were obtained. The mean - birthweight for A (first) twins was 2,377 grams and for B (second) twins 2,296 grams. In comparison of the percentage of low-birth-weight (less than 2,500 grams) infants, there were more small B twins, but the difference was statistically not significant. Because there were no significant statistical differences in birth weight-grouping between A and B twins, they could be compared with the comprehensive Apgar scores, but this method was also shown to be statistically not significant. In comparison of the percentage of breech deliveries in A and B twins, the percentage was more than three times in B twin (A twin, 7.5 per cent; B twin, 24.0 per cent), and the difference was statistically very significant (p < 0.0005). There were no significant statistical differences between the Apgar scores of A and B twins in reference to the manner of delivery. According to the manner of delivery of B twins, spontaneous vertex delivery and total breech extraction revealed higher infant mortality rate than others. B twins presented by the vertex in 88 cases (61.0 per cent), by the breech in 55 cases (37.0 per cent), and by the shoulder in 3 cases (2.0 per cent). And this therefore disclosed no significant statistical differences in Apgar scores in relation to the presentation. The duration of labor appeared to have no clear correlation with the Apgar scores and the perinatal mortality of A and B twins. The delivery interval between A and B twins was 11.9 minutes on an. averge, varying from 3 to 65 minutes. The length of this interval was not found to have any significant effect on the Apgar scores and the perinatal mortality rate of B twin.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.522-522
• /
• 1996

An investigation of the effects of transverse magnetic field and Peltier effect on melt convection and macrosegregation in vertical Bridgman crystal grosth of Te doped InSb was been carried out by means of microstructure observation, Hall measurement, electrical resistivity measurement and X-ray analysis. Before the experiments, Interface stability, convective instability and suppression of convection by magnetic field were calculated theoretically. After doping 1018, 1019 cm-3 Te in InSb, the temperature of Bridgman furnace was set up at $650^{\circ}C$. The samples were grown in I.D. 11mm, 100mm high quartz tube. The velocity of growth was about 2${\mu}{\textrm}{m}$/sec. In order to obtain the suppression of convection by magnetic field in the middle of growth, 2-4KG magnetic field was set on the melt. For searching of the shape of solid-liquid interface and the actual velocity of crystal growth, let 2A current flow from solid to liquid for 1second every 50seconds repeatedly (Peltier effect). The grown InSb was polycrystal, and each grain was very sharp. There was no much difference between the sample with and without magnetic field at a point of view of microstructure. For the sample with Peltier effect, the Peltier marks(striation) were observed regularly as expected. Through these marks, it was found that the solid-liquid interface was flat and the actual growth velocity was about 1-2${\mu}{\textrm}{m}$/sec. On the ground of theoretical calculation, there is thermosolutal convection in the Te doped InSb melt without magnetic field in this growth condition. and if there is more than 1KG magnetic field, the convection is suppressed. Through this experiments, the effective distribution coefficients, koff, were 0.35 in the case of no magnetic field, and 0.45 when the magnetic field is 2KG, 0.7 at 4KG. It was found that the more magnetic field was applied, the more convection was suppressed. But there was some difference between the theoretical calculation and the experiment, the cause of the difference was thought due to the use of some approximated values in theoretical calculation. In addition to these results, the sample with Peltier effect showed unexpected result about the Te distribution in InSb. It looked like no convection and no macrosegregation. It was thought that the unexpected behavior was due to Peltier mark. that is, when the strong current flew the growing sample, the mark was formed by catching Te. As a result of the phenomena, the more Te containing thin layer was made. The layer ruled the Hall measurement. The values of resistivity and mobility of these samples were just a little than those of other reference. It was thought that the reason of this result was that these samples were due to polycrystal, that is, grain boundaries had an influence on this result.