• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.296-299
• /
• 1987

The purpose of this paper is to increase the lamp efficacy by filling the optimal Nitrogen gas pressure in the outer enclosure of metal halide lamp. This study presents a new model of Langmuir in the outer enclosure of discharge lamp. In this paper, in the first place, the diameter of Langmuir sheath and the total gab loss were calculated. Secondly, the each gas loss was computed if the arbitrary gas pressure is filled, With the calculated data, flash over which affects the lamp efficacy, lamp life and color rendering was considered. In case of the established discharge lamp, the gab pressure has been filled by experience only roughly. The gas loss is converted into the radiation output. Therefore, the lamp efficacy is improved by reducing the gas loss.

• Journal of the East Asian Society of Dietary Life
• /
• v.11 no.4
• /
• pp.281-288
• /
• 2001

The autoclave method and the traditional cooking method were compared for nutrients(especially, minerals), color difference, viscosity, reduction of sugar and amino nitrogen content of brown stock. The autoclave cooking method is better than the traditional cooking method for retaining protein and amino nitrogen contents, as well as for reducing sugar content. Also, reducing sugar content increased by the autoclave cooking method. Since the color of brown sauce was related with the reducing sugar content, the autoclave cooking method was more effective than the traditional cooking method for the color development of brown stock. Since the autoclave method can reduce the cooking time without a loss of quality in brown stock, the autoclave method is a viable alternative to the traditional method of preparing brown stock.

• Journal of Nutrition and Health
• /
• v.30 no.6
• /
• pp.715-726
• /
• 1997

This study was conducted longitudinally following the total nitrogen , total lipid, and lactose concentrations and their factors on concentrations of energy-yielding nutrients in human milk from 2-5 days to 12 weeks postpartum of 45 lactating Korean mothers. All samples were from well-defined subjects. And uniform collection procedures were used . Total nitrogen concentration of milk decreased significantly from 385mg/이 at 2-5 days to 201mg/dl at 12 weeks postpartum. Total lipid concentration increased from 1.98g/dl at 2-5 days to 3.09g/dl at 12 weeks postpartum. However, there was a large variation in the concentration of total lipids. Lactose concentration increased signifciantly from 6.53g/dl at 2-5 days to 7.48g/dl at 12 weeks. Total nitrogen concentration in milk was positively related to pregnancy weight gains at 2 and 6 weeks postpartum. Total lipid concentration was positively related to infant birth weight : however, it was negatively related to the maternal weight loss. In addition, total lipid concentration was positively related to parity and maternal percentage body fat at 12 weeks postpartum. Milk lactose concentration was positively related to parity at 2 weeks postpartum.

• Proceedings of the Korea Hospitality Industry Research Society Conference
• /
• 2003.05a
• /
• pp.51-58
• /
• 2003

The autoclave method and the traditional cooking method are compared for nutrients, mineral, color difference, viscosity, reducing sugar and amino nitrogen content of brown stock. For protein and amino nitrogen contents, the autoclave cooking method is better than the traditional cooking method. Also, reducing sugar content is increased by the autoclave cooking method. Since the color of brown sauce is related with reducing sugar content, the autoclave cooking method is more effective than the traditional cooking method for the color of brown sauce. Since the autoclave method can reduce the cooking time without the loss of quality in brown stock, the traditional method can be substituted by this new method.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.92-98
• /
• 2008

The flame image observation and analysis has been investigated for combustion monitoring and management of the pulverized coal firing for thermal power plant, especially for lower nitrogen oxide generation and safer operation. We aimed at obtaining the relationship between burner flame image information and emissions of nitrogen oxide and unburned carbon in furnace utilizing the flame image processing methods, by which we quantitatively determine the conditions of combustion on the individual homers. Its feasibility test was undertaken with Samchonpo thermal power plant #4 unit which has 24 burners, through which the system was observed to be effective for evaluating the combustion conditions and continuous monitoring to prevent future loss of ignition.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.294-300
• /
• 2005

The effect of hairy vetch sod culture on reduction of soil loss and providing of nitrogen was investigated for the fields of Chinese cabbage in Hoenggye-Ri, Pyeongchang-Gun Gangwon-Do (780 m above sea level) from 2002 to 2003. Hairy vetch was sowed at just before planting, 15, 30 and 40 days after planting and right after harvest of Chinese cabbage. Hairy vetch was sod-cultivated with Chinese cabbage. The amount of sowing was $40kg\;10a^{-1}$. In this experiment, proper sowing times that had no influence on the yield of Chinese cabbage were 30 and 40 days after planting while other sowing times led to decrease the yield. In case of the former, there was 74% reduction effect of soil loss compared with no-hairy vetch because of covering the fields with hairy vetch right after harvest. Moreover, when the hairy vetch was put into the soil before planting of Chinese cabbage in the next year, it showed 61-79% substitution effect of standard application rate ($320kg\;ha^{-1}$, chemical fertilizer) for nitrogen fertilizer. It is suggested that using hairy vetch as cover crop would be useful in conservation of soil loss and reduction input of agricultural materials.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.5
• /
• pp.27-37
• /
• 1992

We studied the dielectric and dynamic mechanical losses according to the quenching condition in low density polyethylene being used to power cables. According to severe quenching condition, characteristics of the temperature in internal friction los peak have decreased the magnitude of loss peak as amorphous region lengthen. From now on, the frequency dependent characteristics of dielectric loss have investigated at room temperature, and the dielectric loss peak due to interface polarization, between crystal and amorphous region, occurs about 30[Hz], and that, the peak due to orientation polarization in correspondence to the loss peak in internal friction has observed at about 3 [MHz]. As quenching velocity increased, the effect on quenching condition about the dielectric loss has decreased the magnitude of the loss peak. Thus, estimation has been carried out on the activation energies nd the degree of crystallinity by means of X-ray diffraction are obtained as follows: room quenching : 26.4 [kal/mole] and 54.73 [%], ice quenching : 25.6 [kcal/mole] and 48.47 [%], liquid nitrogen quenching specimens : 22.56 [kcal/mole] and 40.95 [%].

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.26-32
• /
• 2020

In this study, a facility was constructed to supply liquid nitrogen to simulate combustion instability in a liquid rocket combustor. The pressurization and supply performances were predicted and verified through different experiments. The liquid nitrogen supply system was composed of a pressurized supply system, and a dome regulator was used to adjust the pressure of the pressurant. A cavitation venturi was used to control the mass flow rate of liquid nitrogen. The condition of liquid nitrogen supply was a mass flow rate of 2.55 kg/s and the venturi inlet pressure was above 100 bar. Based on the initial experiment, it was observed that the predicted amount of the pressurant was not sufficiently supplied and the target pressure was not supplied due to a drop in tank pressure. Through the modification of the established facilities, the target mass flow rate was successfully supplied and the cryogenic liquid nitrogen supply facility was verified.

• Environmental Engineering Research
• /
• v.20 no.1
• /
• pp.79-87
• /
• 2015

To treat leather industry wastewater (LIW) containing high nitrogen concentration, eight aerobic denitrifiers were isolated from sludge existing in an LIW-treatment aeration tank. Among them, one strain named as KH8 had showed the great ability in denitrification under an aerobic condition, and it was identified as Pseudomonas aeruginosa R12. The aerobic denitrification ability of the strain KH8 was almost comparable to its anaerobic denitrification ability. In lab-scale aerobic denitrifications performed in 1-L five-neck flasks for 48 hr, denitrification efficiency was found to be much improved as the strain KH8 held a great majority in the seeded cells. From the nitrogen balance at the cell-combination ratio of 10:1 (the strain KH8 to the other seven isolates) within the seeded cells, the percentage of nitrogen loss during the aerobic denitrification process was estimated to be 58.4, which was presumed to be converted to $N_2$ gas. When these seeded cells with lactose were applied to plant-scale aeration tank for 56 day to treat high-strength nitrogen in LIW, the removal efficiencies of $COD_{Cr}$ and TN were achieved to be 97.0% and 89.8%, respectively. Under this treatment, the final water quality of the effluent leaving the treatment plant was good enough to meet the water-quality standards. Consequently, the isolated aerobic denitrifiers could be suitable for the additional requirement of nitrogen removal in a limited aeration-tank capacity. To the best of our knowledge, this is the first report of aerobic denitrifiers applied to plant-scale LIW treatment.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1999.05a
• /
• pp.73-74
• /
• 1999