• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.215-220
• /
• 2012

ZnO nanoparticles were synthesized through a facile route and were used as ozonation catalysts. With the increase of calcination temperature ($150-300^{\circ}C$), surface hydroxyl groups and catalytic efficiency of asobtained ZnO decreased remarkably, and the ZnO obtained at $150^{\circ}C$ showed the best catalytic activity. Compared with ozonation alone, the degradation efficiency of phenol increased above 50% due to the catalysis of ZnO-150. In the reaction temperatures range from $5^{\circ}C$ to $35^{\circ}C$, ZnO nanocatalyst revealed remarkable catalytic properties, and the catalytic effect of ZnO was better at lower temperature. Through the effect of tertbutanol on degradation of phenol and the catalytic properties of ZnO on degradation of nitrobenzene, it was proposed that the degradation of phenol was ascribed to the direct oxidation by ozone molecules based on solidliquid interface reaction.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.19-28
• /
• 1990

The rate of chlorine-exchange reaction of antimony trichloride with benzyl, $\alpha$-phenyl ethyl and diphenyl methyl chlorides in nitrobenzene have been determined. The results indicate that the chlorine-exchange reaction follows second-order kinetics with respect to antimony trichloride and first-order kinetics with respect to organic chlorides. Rate = $k_3[SbCl_3]^2$ [Org-Cl] The rate constants of chlorine-exchange of antimony trichloride with organic chloride increase in the following order of the organic chlorides. Benzyl chloride < $\alpha$-phenyl ethyl chloride < diphenyl methyl chloride The mechanism of the chlorine-exchange reactions has been proposed.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.274-280
• /
• 1997

The rates and stoichiometry of the reaction of gallane-trimethylamine with selected organic compounds containing representative functional groups were examined in tetrahydrofuran solution under standardized conditions (THF, 0 ℃). And its reducing characteristics were compared with those of aluminum hydride-triethylamine(AHTEA). The rate of hydrogen evolution from active hydrogen compounds varied considerably with the nature of the functional group and the structure of the hydrocarbon moiety. Alcohols, phenol, amines, thiols evolved hydrogen rapidly and quantitatively. Aldehydes and ketones were reduced moderately to the corresponding alcohols. Cinnamaldehyde was reduced to cinnamyl alcohol, which means that the conjugated double bond was not attacked by gallane-trimethylamine. Carboxylic acids, esters, and lactones were stable to the reagent under standard conditions. Acid chlorides also were rapidly reduced to the corresponding alcohols. Epoxides and halides were inert to the reagent. Caproamide and nitrile were stable to the reagent, whereas benzamide was rapidly reduced to benzylamine. Nitropropane, nitrobenzene and azoxybenzene were stable to the reagent, whereas azobenzene was reduced to 1,2-diphenylhydrazine. Oximes and pyridine N-oxide were reduced rapidly. Di-n-butyl disulfide and dimethyl sulfoxide were reduced only slowly, but diphenyl disulfide was reduced rapidly. Finally, sulfones and sulfonic acids were inert to the reagent under the reaction.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.871-877
• /
• 1994

Most of the aromatic nitro compounds were reduced to amines in high yield by transfer of hydrogen from 4-vinyl cyclohexene to the substrate via palladium catalyst. The usefulness of the method is not affected by the presence of a variety of other functional groups such as -OH, $-OCH_3$, $-CH_3$, $-CO_2H$, and -Cl, except for halogen which is removed during hydrogenation. The reduction of ortho-substituted nitrobenzene such as o-nitrotoluene, o-nitrophenol, o-nitroanisole was slower than the para isomer. Typically, the nitro compound is refluxed in ethanol with a large exess of 4-vinylcyclohexene in the presence of Pd-C catalyst. Under the above conditions, p-nitrobenzaldehyde, p-nitrobenzyl alcohol, and p-nitrobenzyl acetate were reduced to p-toluidine.

• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.85-93
• /
• 1999

The destruction of hazardous chemicals such as chlorinated organic compounds(COCs) and nitroaromatic compounds(NACs) by zero-valent iron powder is one of the latest innovative technologies. In this paper. the rapid dechlorination of chlorinated compounds as well as transformation of nitro functional group to amine functional group in the nitroaromatic compounds using synthesized zero-valent iron powder with nanoscale were studied in anaerobic batch system. Nanoscale iron, characterized by high surface area to mass ratios(31.4$\textrm{m}^2$/g) and high reactivity, could quickly reacts with compounds such as TCE, chloroform, nitrobenzene, nitrotoluene, dinitrobenzene and dinitrotoluene, at concentration of 10mg/L in aqueous solution at room temperature and pressure. In this study, the TCE was dechlorinated to ethane and chloroform to methane and nitro groups in NACs were transformed to amino groups in less than 30min. These results indicated that this chemical method using nanoscale iron powder has the high potential for the remediation of soils and groundwater contaminated with hazardous toxic chemicals including chlorinated organic compounds and nitro aromatic compounds.

• BMB Reports
• /
• v.29 no.2
• /
• pp.111-115
• /
• 1996

A novel glutathione S-transferase from Pseudomonas sp. DJ77 was expressed in E. coli and purified by glutathione-affinity chromatography. The enzyme was composed of two identical subunits. The molecular size of the enzyme was 42 kDa by sephadex G-150 gel permeation chromatography and Mr of each subunit was 23 kDa by sodium dodecylsulfate-polyacrylamide gel electrophoresis. pI value of the enzyme was approximately 5.8 by isoelectric focusing. This enzyme showed the highest activity toward 1-chloro-2,4-dinitrobenzene as the electrophilic substrate. The relative activities toward p-nitrobenzyl chloride and 1,2-dichloro-4-nitrobenzene were 3.8% and 1.3% of the activity toward 1-chloro-2,4-dinitrobenzene, respectively. $K_m$ and $V_{max}$ values for 1-chloro-2,4-dinitrobenzene calculated by Lineweaver-Burk plot were 0.76 mM and $14.81\;{\mu}mol/min/mg$, respectively, and those for glutathione were 6.23 mM and $64.93\;{\mu}mol/min/mg$, respectively. The enzyme showed highest glutathione S-transferase activity at pH 8.0 and was stable between pH 6.0 and 9.0. The enzyme retained its activity up to $35^{\circ}C$ for 90 min but was unstable above $45^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.5
• /
• pp.368-372
• /
• 2004

The lignin contents between IR-29 and Pokkali were not significantly different in the absence of NaCl, but they were slightly increased at 40 mM NaCl. Although lignin contents were not relatively significantly different between salt treated and control plants, the total yields of alkaline nitrobenzene oxidation ranged from 17.4-20.0 mg/g of cell wall residue at 40 mM NaCl were significantly different compared with control plants (11.8-12.2 mg/g). The total amounts of ester-linked hydroxycin-namic acids in IR-29 were decreased from 14.5 to 9.9mg/g, while Pokkali is almost same levels (14.9-15.0 mg/g) under treated and control with 40 mM NaCl. In contrast, the total amounts of ether-linked hydroxycinnamic acids were increased from 9.4 to 13.9 mg/g together with an opposite trend in Pokkali as a decrease 10.9 to 8.8 mg/g under treated and control with 40 mM NaCl. These results revealed that IR-29 is more sensitive in response to 40 mM NaCl in terms of hydroxycinnamic acids than Pokkali.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.73-82
• /
• 1990

Rosin-maleic anhydride adduct (RMA) was synthesized from rosin and maleic anhydride. The polyamideimides were obtained by reacting the adduct with two aromatic diisocyanates using sodium methoxide as catalyst. The yield and the inherent viscosity of polymers obtained by the reaction in NMP solvent were low because of the possible reaction of NMP solvent with diisocyanate monomer. The polymers were synthesized in solvent mixture of NMP and cosolvents such as xylene, acetophenone, benzonitrile, and nitrobenzene in order to minimize the side reaction of NMP with diisocyanates. The yield of polymer obtained by the reaction in NMP-nonpolar cosolvent mixtures was about 70% and that obtained by the reaction in NMP-polar cosolvent mixtures was over 90%, respectively. The polymers were either amorphous or poorly cystalline, and soluble only in highly polar solvents. The inherent viscosity of polymers ranges from 0.12-0.26dl/g. The results of thermal analysis showed that the polymer had good thermal stability with initial decomposition temperature over $330^{\circ}C$.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.308-313
• /
• 2011

The ring-opening isomerization polymerization behavior of 2,5,6,7-tetrahydro-3H-imidazo[2,1-b] [1,3] oxazine(TII) has been studied under various conditions. The present study aimed at improving the low polymerizability of the above monomer (six-membered ring) up to a level comparable to that of 2,5,6-tetrahydroimidazo[2,1-b] [l,3] oxazole(TIO) (five-membered ring). The optimum result could be observed when methyl trifluoromethanesulfonate(MeOTf) and nitrobenzene were used as an initiator and a solvent in the polymerization at $60^{\circ}C$ for 24 h. Polymers were confirmed by$^1H$ NMR과$^{13}C$ NMR, and m measurements. The molecular weight obtained by gel permeation chromatography (GPC) corresponded to the molecular weight theoretically calculated from the feed ratio. The melting temperature ($T_m$) of TII was conspicuously different from that of TIO, because of the difference in the alkyl group.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.3-9
• /
• 1983

Lithium n-butylborohydride was prepared from borane-dimethylsulfide (BMS) and n-butyllithium, and the approximate rates and stoichiometrics of its reactions with selected organic compounds containing representative functional groups were studied in THF at room temperature. Phenol and benzenetiol liberated hydrogen quickly and quantitatively, and the reactions of primary alcohols, 2,6-di-ter-butylphenol and 1-hexanethiol liberated hydrogen quantitatively within 3 hrs, whereas the reactions of secondary and tertiary alcohols were very slow. Aldehydes and ketones were reduced rapidly and quantitatively to the corresponding alcohols. Cinnamaldehyde utilized 1 equiv. of hydride rapidly, suggesting the reduction to cinnamyl alcohol. Carboxylic acids evolved 1 equiv. of hydrogen rapidly and further reduction was not observed. Anhydrides utilized 2 equiv. of hydride rapidly but further hydride uptake was very slow, showing a half reduction. Acid chlorides were reduced to the alcohol stage very rapidly. All the esters examined were reduced to the corresponding alcohol rapidly. Lactones were also reduced rapidly. Expoxides took up 1 equiv. of hydride at a moderate rate to be reduced to the corresponding alcohols. Nitriles and primary amides were inert to this hydride system, whereas tertiary amide underwent slow reduction. Nitroethane and nitrobenzene were reduced slowly, however azobenzene and azoxybenzene were quite inert. Cyclohexanone oxime evolved 1 equiv. of hydrogen rapidly, but no further reduction was observed. Phenyl isocyanate and pyridine N-oxide were proceeded slowly, showing 1.74 and 1.53 hydride uptake, respectively in 24 hours. Diphenyl disulfide was reduced rapidly, whereas di-n-butyl disulfide, sulfone and sulfonic acids were inert or sluggish. n-Hexyl iodide and benzyl bromide reacted rapidly, but n-octyl bromide, n-octyl chloride, and benzyl chloride reacted very slowly.