• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.231-235
• /
• 1994

The multi-dielectric layer $SiO_2$/$Si_3{N_4}$/$SiO_2$ (ONO) is used to improve charge retention and to scale down the memory device. The nitride layer of MNOS device is oxidize to form ONO system. During the oxidation of the nitride layer, the change of thickness of nitride layer and generation of interface state between nitride layer and top oxide layer occur. In this paper, effects of oxidation of the nitride layer is studied. The decreases of the nitride layer due to oxidation and trapping characteristics of interface state of multi layer dielectric film are investigated through the C-V measurement and F-N tunneling injection experiment using SONOS capacitor structure. Based on the experimental results, carrier trapping model for maximum flatband voltage shift of multi layer dielectric film is proposed and compared with experimental data. As a results of curve fitting, interface trap density between the top oxide and layer is determined as being $5{\times}10^11$~$2{\times}10^12$[$eV^1$$cm^2$].

• 한국재료학회지
• /
• 제10권9호
• /
• pp.624-628
• /
• 2000

표면 탄성과 디바이스의 전극재료로 사용되는 Al-%Cu(4000$\AA$)/tungsten nitride 박막을 magnetron sputtering 법으로 제조하고 전기저항을 평가한 비정질상의 tungsten nitride 박막을 제조할 수 있었고, 비정질 형성을 위해 질소비(R =$N_2$/(Ar+$N_2$)가 10~40% 정도 필요하다. Tungsten nitride 박막의 잔류응력은 비정질이 형성되면서 급격히 감소되었다. 이러한 비정질 박막위에 Al-1%Cu 합금막이 형성되었다. 다층막은 453K에서 4시간 동안 열처리함으로써 $3.6{\mu}{\Omega}-cm$의 저항을 나타냈는데, 이는 박막내 결정립 성장과 결함의 감소에 기인하였다.

• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.33-40
• /
• 1998

The composite SiO$_2$/Si$_3$N$_4$/SiO$_2$(ONO) film formed by oxidation on nitride film has been widely studied as DRAM stacked capacitor multi-dielectric films. Load lock(L/L) LPCVD system by HF cleaning is used to improve electrical capacitance and to scale down of effective thickness for memory device, but is brings a new problem. Nitride film deposited using HF cleaning shows selective deposition on poly silicon and oxide regions of capacitor. This problem is avoidable by carpeting chemical oxide using $H_2O$$_2$cleaning before nitride deposition. In this paper, we study the limit of nitride thickness for abnormal oxidation and the initial deposition time for nitride deposition dependent on underlayer materials. We proposed an advanced fabrication process for stacked capacitor in order to avoid selective deposition problem and show the usefulness of nitride deposition using L/L LPCVD system by $H_2O$$_2$cleaning. The natural oxide thickness on polysilicon monitor after HF and $H_2O$$_2$cleaning are measured 3~4$\AA$, respectively. Two substrate materials have the different initial nitride deposition times. The initial deposition time for polysilicon is nearly zero, but initial deposition time for oxide is about 60seconds. However the deposition rate is constant after initial deposition time. The limit of nitride thickness for abnormal oxidation under the HF and $H_2O$$_2$cleaning method are 60$\AA$, 48$\AA$, respectively. The results obtained in this study are useful for developing ultra thin nitride fabrication of ONO scaling and for avoiding abnormal oxidation in stacked capacitor application.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.12-17
• /
• 2019

In this study, the Ag nano-dots structure and silicon nitride film were applied to the textured wafer surface to improve the light trapping effect of mono-crystalline silicon solar cell. Ag nano-dots structure was formed by performing a heat treatment for 30 minutes at 650℃ after the deposition of 10nm Ag thin film. Ag thin film deposition was performed using a thermal evaporator. The silicon nitride film was deposited by a Hot-wire chemical vapor deposition. The effect of light trapping was compared and analyzed through light reflectance measurements. Experimental results showed that the reflectivity increased by 0.5 ~ 1% under all nitride thickness conditions when Ag nano-dots structure was formed before nitride film deposition. In addition, when the Ag nano-dots structure is formed after deposition of the silicon nitride film, the reflectance is increased in the nitride film condition of 70 nm or more. When the HF treatment was performed for 60 seconds to improve the Ag nano-dot structure, the overall reflectance was improved, and the reflectance was 0.15% lower than that of the silicon nitride film-only sample at 90 nm silicon nitride film condition.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.89-93
• /
• 2018

1200V 이상 급의 전기자동차의 파워 모듈에 적용되는 세라믹 기판은 구동 전력으로 고전력이 인가되는 특성상 고열전도도, 고 전기절연성, 저열팽창계수, 급격한 온도 변화에 대한 저항성의 특성이 요구된다. 방열기판에 적용되는 세라믹 중 질화알루미늄과 질화규소는 그 요구를 충족하는 소재로서 고려되고 있다. 이에 따라 본 논문에서는 질화알루미늄과 질화규소의 방열기판 소재로서의 특성을 상용해석프로그램을 통해 비교하였다. 그 결과 질화규소는 질화알루미늄에 대해 각각 동일한 조건의 열을 부여하는 공정을 시물레이션으로 구현했을 때 스트레스와 휨이 덜 발생하여 더 우세한 내충격성, 내stress성을 보였다. 열전도도 측면에서는 질화알루미늄이 방열 소재로서 더 우수한 특성을 지니지만 신뢰성 측면에서는 질화규소가 더 우세함을 시물레이션을 통해 관찰하였다.

• 자원리싸이클링
• /
• 제11권5호
• /
• pp.7-10
• /
• 2002

Iron nitride magnetic fluid was oxidized by exposing it to the air under normal atmospheric conditions. After exposure of 3.2 hours, the relative saturation magnetization of the iron nitride magnetic fluid is less than 0.4 compared to the value of the unexposed sample, and it is nearly zero after exposure for 1008 hours. The structure of the oxidized iron nitride is considered to be a non-magnetic hematites. The thickness of the oxidation layers of the iron-nitride particles are nearly the same, about 3 nm, regardless of the different particle sizes.

• 한국전기전자재료학회논문지
• /
• 제14권10호
• /
• pp.779-784
• /
• 2001

In this work, we studied the characteristics of nitride films for the optimization of PMD(pro-metal dielectric) linear process, which can be applied to the recent semiconductor manufacturing process. We split the deposit condition of nitride films into four parts such as PO(protect overcoat) nitride, baseline, low hydrogen and high stress and low hydrogen, respectively. We tried to find out correlation between BPSG deposition and densification. In order to analyze the changes of Si-H and Si-NH-Si bonding density, we used FTIR area method. We also investigated the crack generation on wafer edge after BPSG densification, and the changes of nitride film stress as a function of RF power variation to judge whether the deposited films.

• 한국세라믹학회지
• /
• 제21권1호
• /
• pp.51-59
• /
• 1984

In this paper mechanical properties of reaction-bonded silicon nitride are studied with the variation of initial nitrogen partial pressure. At 1, 25$0^{\circ}C$ the amount of nitridation and the nucleation of nitride increase linearly with the nitrogen partial pressure increase. After the nitridation is completed the density of nitride and modulus of rupture at room temperature are increased with the amount of nitridation. When the partial pressure of nitrogen is 0.5 atm the specimen show the optimum properties that is the highest density of nitride and modulus of rupture. Also the microstructure of $\alpha$-matte is deveoped very well at that pressure of nitrogen which contributes to the strength development of specimen. It is shown that with proper control of initial partial pressure of nitrogen high strength silicon nitride body can be manufactured for dynamic applications.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1103-1109
• /
• 2003

Crystalline carbon nitride films have been deposited by RF reactive magnetron sputtering system with negative DC bias. The carbon nitride films deposited on various substrates showed ${\alpha}$- C$_3$N$_4$,${\beta}$-C$_3$N$_4$ and lonsdaleite structures through XRD and FTIR We can find the grain growth of hexagonal structure from SEMI photographs, which is coincident with the theoretical carbon nitride unit cell. When nitrogen gas ratio is 70 % and RF power is 200 W, the growth rate of carbon nitride film on quartz substrate is about 2.1 $\mu\textrm{m}$/hr.

• 한국세라믹학회지
• /
• 제33권3호
• /
• pp.269-276
• /
• 1996

The effect of sintering aids on the sinterability for silcion nitride has been studied by hundreds workers. However the effect of sintering aids on the machinability as the own trobles which is the major barrier for the field applications of the ceramic components has not been fully studied. in this study the contents of Al2O3 and Y2O3 in silicon nitride were varied from 0 to 8 wt% respectively. The physical and mechanical properties of the silcion nitride were measured. The optimal microstructure of silicon nitride balls with the excellent machinability by adding with various contents of sintering aids was studied by MGF(magnetic-fluid grinding)technique. An attempt to figure out how the mechanical properties influence the machinability of silicon-nitride ball was made.