• 대한화학회지
• /
• 제18권4호
• /
• pp.272-277
• /
• 1974

분배계수와 용매의 용해도 파라미터 도표상의 추출포물선을 검토하여 질산산성에서 유로퓸을 TBP로 추출할 때 유로퓸착물과 TBP의 활동도 계수간의 관계를 알 수 있었고 이에 따라 TBP의 용해도 파라미터를 결정하는 가능성을 제시하였다. 용매로서는 cyclohexane, 벤젠, 톨루엔, chlorobenzene을 사용하였고 TBP의 농도를 용적백분율로 5에서 50까지 변화시켰다.

• Bulletin of the Korean Chemical Society
• /
• 제21권11호
• /
• pp.1085-1089
• /
• 2000

The effect of 2-hydroxyacetophenone-aroyl hydrazone derivatives on the inhibition of copper corrosion in 3N nitric acid solution at 303 K was investigated by galvanostatic polarization and thermometric techniques. A significant decrease in the cor rosion rate of copper was observed in the presence of the investigated compounds. The corrosion rate was found to depend on the nature and concentrations of the inhibitors. The degree of surface coverage of the adsorbed inhibitors is determined from polarization measurements, and it was found that the results obey the Frumkin adsorption isotherm. The inhibitors acted as mixed-type inhibitors, but the cathode is more polarized. The relative inhibitive efficiency of these compounds has been explained on the basis of structure dependent electron donor properties of the inhibitors and the nature of the metal-inhibitor interaction at the surface. Also, some thermodynamic data for the adsorption process ( ΔGa* and f ) are calculated and discussed.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1998년도 제1회 총회 및 추계학술발표회
• /
• pp.39-39
• /
• 1998

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.455.1-455
• /
• 2001

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.305-305
• /
• 1999

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 추계 총회 및 학술발표회
• /
• pp.152-156
• /
• 2005

• 자원환경지질
• /
• 제53권2호
• /
• pp.183-196
• /
• 2020

본 연구는 마이크로웨이브-질산용출과 자력/수력선별을 이용하여 정광으로부터 자연 금을 회수하는 것을 목표로 하였다. 마이크로웨이브-질산용출실험을 통해 용출용액으로부터 불용성-잔류물을 여과하였다. 용출용액을 원자흡수분광기(AAS)로 분석한 결과 Au는 전혀 용출되지 않은 것을 그리고 불용성-잔류물을 후방산란전자영상(BSE)으로 관찰한 결과 자연 금이 단체분리된 것으로 확인되었다. 불용성-잔류물을 자력/수력선별 하여 자성광물과 비-자성광물로 선별하였다. 자성광물에서 자철석이 회수되었고, 비-자성광물을 다시 수력선별한 결과 자연 금이 회수되었다. 자연 금은 X선 회절 분석(XRD)과 BSE 영상에서 확인되었다.

• Environmental Analysis Health and Toxicology
• /
• 제29권
• /
• pp.10.1-10.6
• /
• 2014

Objectives Cigarette smoking had been recorded as the main cause of impaired endothelium-dependent vasodilation in smokers by reducing nitric oxide (NO), a production of endothelial nitric oxide synthase (eNOS). However, the mechanism of NO impairment via eNOS activity is unclear until now. In this study, cell passage is suggested to be a relevant factor to eNOS expression under cigarette smoking stress. Methods Bovine aortic endothelial cells (BAECs) were chosen as the research subject with passages ranking from 6 to 9 (6P to 9P). After exposure of cigarette smoking extract (CSE) solution, MTT assay and Western blot method were performed to check the cell viability as well as eNOS protein concentration. In these experiments, four concentrations of CSE at 0.5, 1, 2, and 4% were selected for treatment. Results Our results showed that cells almost died at 4% of CSE. Besides, eNOS protein mass had a linear decrease under the increase of CSE concentration. In addition, the effect of CSE on eNOS expression was dissimilar between different passages. Conclusions This study indicated that CSE had effect on both cell viability and eNOS expression. Besides, a reduction in protein mass was matched with the decrease of cell viability due to CSE tress. Last but not least, the response of eNOS protein to different concentration of CSE at different passages was disparate, making the hypothesis about cell passage related inhibition of eNOS caused by CSE solution.

• 자원리싸이클링
• /
• 제18권5호
• /
• pp.26-36
• /
• 2009

폐스크랩으로부터 Ru을 회수하기 위한 전처리 공정으로 질산을 침출제로 사용하여 Pb, Ba, Zn, Al, Bi, Ag Fe, Co, Zr, Si 등의 침출 거동을 고찰하고, 이들 성분들을 제거 할 수 있는 최적조건을 도출하고자 하였다. 실험결과 고액농도 250 g/L에서 10-15% 질산 용액으로 약 90%의 Pb를 침출시켜 제거할 수 있었다. 또한 Ba의 경우도 Pb와 유사한 침출 거동을 나타내었으며, 기타 금속원소들 중 Zn, Al, Bi, Ag, Fe, Co, Zr은 질산농도 증가에 따라 침출율이 증가하나 질산농도가 10% 이상에서는 침출율이 거의 일정하였다. 한편, Ru의 경우는 약 100 ppm 이하로 침출율이 미미하였고, 질산침출 후 잔사중에 Ru이 50%이상으로 농축됨을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제13권2호
• /
• pp.43-63
• /
• 1989

Various kinds of corrosion prevention methods have been developed. It is known that the method of electrochemical protection is more effective and economical than any other method on the large scale metal structures in corrosive solutions. Strong acid solutions such as nitric and sulfuric acid solutions are often used in industries, and the expensive stainless steel is almost exclusively used for the equipment that comes in contact with such acid solutions. However, it is more reasonable that carbon steel is used rather than stainless steel depending upon concentration of those acid solutions from the economical viewpoint. In this study, the typical strong acid solution such as nitric and sulfuric acid solutions are chosen for the experiment and the selected materials of specimen are the stainless steels of SUS 304L and SUS 316L, the carbon steels of SS 41, SM 50 and RA 32, and highly pure lead. Electrochemical protection diagrams can be drawn with data from the external cathodic and anodic polarization curves of SUS 304L, SUS 316L and SM 50 steels in 5-60% nitric acid solutions and from those polarization curves of SS 41, RA 32, SM 50 and SUS 316L steels, and highly pure lead in 2.5-98% sulfuric acid solutions at the slow scanning rate. The data obtained with using the determination method of the optimum cathodic protection potential, the Tafel extrapolation method and the characteristics of anodic polarization curves. The main results obtained from the diagrams are as follows: 1) In nitric acid solution : (1) Corrosion potentials exist in each of those corrosion zones on the stainless steels in the lower concentration than about 12% solutions and on the high tensile strength steels in the lower concentration than about 30% solutions, but the corrosion current (density) in each zone is small on the above mentioned former steels and large on the latter ones. (2) The stainless steels can be self-passivated in the higher concentration than 15% solutions, and the high tensile strength steels gives rise to the same phenomenon in the higher concentration than 35% solutions. (3) The stainless steels in the lower concentration than 60% solutions and the high tensile strength steels in the higher concentration than 35% solutions can be used without protection, but the latter steels must ve protected anodically in the lower conccentration than about 30% solutions. 2) In sufuric acid solution : (1) The carbon steels can be self-passivated in the higher concentration than 45% solutions, and the SUS 316L steel in higher concentration than 75% solutions and the lead in all concentration solutions also gives rise to the same phenomenon. (2) The lead in the lower concentration than 80% solutions and the SUS 316L steel in the higher concentration than 80% solutions can be used without protection. (3) The carbon steels in the higher concentration than 50% solutions also can be used without protecting economically, but the SUS 316L steel in the 20-70% solutions are considerably corrosive without protecting anodically.