• 전기학회논문지
• /
• 제62권8호
• /
• pp.1066-1073
• /
• 2013

This paper illustrates newly an outage cost impact index function(OCIIF). The assessment of the OCIIF is described using the Web Based Online Real-time Outage Cost Assessment and Information System(WOROCAIS) for power system outage cost assessment in Korea. The proposed OCIIF is not absolute but relative outage cost impact index function in view point of outage time using web based survey method for outage cost assessment. While conventional methodology does not consider short time outage cost assessment, the proposed OCIIF reflects short time outage. SCOF(Sector Customer Outage Function) in stead of the traditional SCDF(Sector Customer Damage Function) is defined and proposed newly in this paper. Based the SCOF, AVLL(Average Value of Loss Load) is newly proposed. The OCIIF is demonstrated by WOROCAIS in case study around 2,000 sample data surveyed by KEPCO in South Korea in recent.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.13-20
• /
• 2015

PURPOSES: This paper describes the expansion caused by the alkali-aggregate reaction (AAR) in concrete pavement currently in service. It also discusses the effects of joints installed to release the stress induced by the AAR expansion. METHODS: The expansion effect on concrete pavement was verified by a visual inspection and long-term measurement of the joint width of a cut-section. The behaviors of 16 newly installed joints were monitored as part of the investigation and long-term monitoring was carried out for three years after cutting. RESULTS: The behavior of a bridge was affected when AAR occurred in the connected pavement. The newly installed joints shrank in the longitudinal direction of the bridge after cutting. The width of the joints decreased over the six months after cutting. A large portion of the joint width (8.5cm) was found to have closed nine months after cutting. It had ultimately shrunk by about 92 percent when the final measurement was taken. CONCLUSIONS : The expansion of the pavement due to AAR was quantitatively described by visual inspection and the long-term monitoring of the newly cut joints. However, the width of the new joints decreased over the six to nine months after cutting. Additional research should be conducted to determine a means of controlling the expansion due to AAR in the pavement.

• Journal of Periodontal and Implant Science
• /
• 제40권6호
• /
• pp.271-275
• /
• 2010

Purpose: Many techniques have been described for achieving vertical augmentation of the maxillary sinus. The aim of this study is to evaluate the effect of low-intensity pulsed ultrasound (LIPUS) to enhance bone regeneration after sinus floor elevation. Methods: The sinus lifting technique was performed through a lateral approach on 8 different sites of 5 patients (3 males and 2 females) and their mean age was 45.7 years old. The sites were randomly assigned to the control or test groups. The control group had 4 sites that received lateral sinus lifting procedure only, while the test group had 4 sites that received LIPUS application after the lateral sinus lifting procedure. 24-32 weeks (an average of 29 weeks) postoperatively, new bone formation in the augmented sinus sites was evaluated through histologic and histomorphometric analyses of the biopsy specimens obtained during implant placement. Results: In the test group, the mean percentage of newly formed bone was $19.0{\pm}2.8$%. In the control group, the mean percentage of newly formed bone was $15.2{\pm}3.1$%. The percentage of newly formed bone was approximately 4% higher in those cases where the sinus was treated by LIPUS than the percentage in those cases where it was not used. The difference was statistically significant. Conclusions: Within the scope of this study, low-intensity pulsed ultrasound application after sinus lifting appeared to have a significant effect on the development of new bone formation.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.514-520
• /
• 2002

본 논문에서는 L-band용 이동통신 단말기에 적용 가능한 수신단 MMIC 믹서의 설계 및 제작에 관한 연구를 다룬다. 단일 칩으로 집적하기 적절한 LO 및 RF balun을 능동소자를 이용하여 구성하였으며 각 능동소자의 공정상의 변화를 보상하기 위하여 새롭게 제안된 바이어스 회로를 적용하였다. 믹서의 변환이득은 -14 dB이며 IP3는 약 4 dBm, 포트간 격리도는 25 dB 이상의 값을 가진다. 제안된 새로운 바이어스 회로는 FET와 저항으로 구성되며 공정상의 변화와 온도의 변화 등에 의한 문턱전압의 변화를 보상해 줄 수 있다. 설계된 칩의 사이즈는 1.4 mm$\times$1.4 mm이다.

• Journal of Power Electronics
• /
• 제6권2호
• /
• pp.95-103
• /
• 2006

In this paper, a novel prototype of auxiliary switched capacitor assisted voltage source soft switching PWM Single-Ended Push Pull (SEPP) series capacitor compensated load resonant inverter with two auxiliary edge resonant lossless inductor snubbers is proposed and discussed for small scale consumer high-frequency induction heating (IH) appliances. The operation principle of this inverter is described by using switching mode equivalent circuits. The newly developed multi resonant high-frequency inverter using trench gate IGBTs can regulate its output AC power via constant frequency edge-resonant associated soft switching commutation by using an asymmetrical PWM control or duty cycle control scheme. The brand-new consumer IH products which use the newly proposed edge-resonant soft switching PWM-SEPP type series load resonant high-frequency inverters are evaluated using power regulation characteristics, actual efficiency vs. duty cycle and input power vs. actual efficiency characteristics. Their operating performance compared with some conventional soft switching high-frequency inverters for IH appliances is discussed on the basis of simulation and experimental results. The practical effectiveness of the newly proposed soft switching PWM SEPP series load resonant inverter is verified from an application point of view as being suitable for consumer high-frequency IH appliances.

• Journal of Ecology and Environment
• /
• 제41권1호
• /
• pp.9-18
• /
• 2017

Background: Species in the heterokont genus Synura are colonial and have silica scales whose ultrastructural characteristics are used for classification. We examined the ultrastructure of silica scales and molecular data (nuclear SSU rDNA and LSU rDNA, and plastid rbcL sequences) to better understand the taxonomy and phylogeny within the section Petersenianae of genus Synura. In addition, we report the first finding of newly recorded Synura species from Korea. Results: We identified all species by examination of scale ultrastructure using scanning and transmission electron microscopy (SEM and TEM). Three newly recorded species from Korea, Synura americana, Synura conopea, and Synura truttae were described based on morphological characters, such as cell size, scale shape, scale size, keel shape, number of struts, distance between struts, degree of interconnections between struts, size of base plate pores, keel pores, base plate hole, and posterior rim. The scales of the newly recorded species, which belong to the section Petersenianae, have a well-developed keel and a characteristic number of struts on the base plate. We performed molecular phylogenetic analyses based on sequence data from three genes in 32 strains (including three outgroup species). The results provided strong statistical support that the section Petersenianae was monophyletic, and that all taxa within this section had well-developed keels and a defined number of struts on the base plate. Conclusions: The phylogenetic tree based on sequence data of three genes was congruent with the data on scale ultrastructure. The resulting phylogenetic tree strongly supported the existence of the section Petersenianae. In addition, we propose newly recorded Synura species from Korea based on phylogenetic analyses and morphological characters: S. americana, S. conopea, and S. truttae.

• 식물분류학회지
• /
• 제40권2호
• /
• pp.79-83
• /
• 2010

현호색과 현호색속의 1신종인 날개현호색이 한국의 경상북도 포항시에서 발견되어 기재하고 도해하였다. 날개현호색은 괴경의 내부 표면은 백색이고, 하측 외화판의 기부는 전저이며, 더 작은 종자를 가짐으로써, 이와 근연종인 점현호색과 뚜렷이 구별되었다.

• 환경생물
• /
• 제35권3호
• /
• pp.251-264
• /
• 2017

A study searching for unrecorded and taxonomically undescribed indigenous species has been conducted since 2006. Samples were collected from many sites in coastal waters and offshore in Korea as well as around Jeju Island. Since 2008 we have found 13 unrecorded species belonging to family Diplopsaliaceae, Heterocapsaceae, Kolkwitziellaceae, Protoperidiniaceae and Thoracosphaeraceae. The species are as follows, Preperidinium meunieri (2014), Heterocapsa ovata (2015), H. pseudotriquetra (2015), Diplopsalis lenticula (2008), Protoperidinium abei (2009), P. diabolus var. longipes (2010), P. depressum (synonym: P. parallelum (2008)), P. latispinum (2016), P. punctulatum (2010), P. solidicorne (synonym: P. spinosum (2010)), P. subpyriforme (2010), P. pacificum (2013), Scrippsiella hexapraecingula (2009) (note; The numbers in parenthesis refer to the year that the species was reported as unrecorded indigenous species by National Institute of Biological Resources, NIBR hereafter). Among these, 5 species were described as newly recorded species in Korean waters, and 8 were re-described in this study.

• Animal Systematics, Evolution and Diversity
• /
• 제10권1호
• /
• pp.61-83
• /
• 1994

1989년 6월부터 1992년 8월까지 울릉도의 13개 지점에서 채집된 해산 이매패류를 조사한 결과 익형아강(Pteriomorphia)에 속하는 9과 33종(아종)이 채집되었다. 이들은 모두 울릉도 미기록 종이며, 이들 중 Modiolus(Modiolus) comptus Sowerby, 1915, Gregariella coralliophaga(Gmelin, 1971), Musculus(Musculus) laevigatus(Gray, 1824), Chlamys(Coralichlamys) jousseaumei Bavay, 1904, Spondylus(Spondylus) varius Sowerby, 1829 등 5종은 한국 미기록종으로 밝혀졌기에 이들을 재기재 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.185-187
• /
• 2005

The reactor protection system is the most important function for the safe operation of nuclear powerplants (NPPs) in that such system protects a nuclear reactor tore whose damage can cause an enormous disaster to the nuclear facility and the public. A digital reactor protection system (DRPS) is being developed in KAERI for use in the newly-constructed NPPs and also for replacing the existing analog-type reactor Protection systems. In this paper, an software verification and validation (V&V) activities for DRPS, which are independent of the DRPS development processes, are described according to the software development life cycle. The main activities of DRPS V&V processes are the software planning documentations, the verification of software requirements specification (SRS) and software design specification (SDS), the verification of codes, the tests of the integrated software and system. Moreover, the software safety analysis and the software configuration management are involved in the DRPS V&V processes. All of the V&V activities are described, in detail, in this paper.