• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.3
• /
• pp.233-245
• /
• 2011

A new BWIM(bridge weigh-in-motion) algorithm using both measured strain and acceleration data is proposed. To consider the effects of bridge vibration on the estimation of moving loads, the dynamic governing equation is applied with the known stiffness and mass properties but damping is ignored. Dynamic displacements are computed indirectly from the measured strains using the beam theory and accelerations are measured directly by accelerometers. To convert a unit moving load to its equivalent nodal force, a transformation matrix is determined. The incompleteness in the measured responses is considered in developing the algorithm. To examine the proposed BWIM algorithm, simulation studies, laboratory experiments and field tests were carried. In the simulation study, effects of measurement noise and estimation error in the vehicle speed on the results were investigated.

• Transactions of Materials Processing
• /
• v.16 no.2 s.92
• /
• pp.101-106
• /
• 2007

Uniaxial displacement controlled tests were performed on annealed Type 304 stainless steel at room temperature. A servo-controlled testing machine and strain measurement on the gage length were employed to measure the response to a given input. The test results exhibit that the flow stress increases nonlinearly with the strain rate and the relaxed stress at the end of the relaxation periods depends strongly on the strain rate preceding the relaxation test. The rate-dependent inelastic deformation behavior is simulated using a new unified viscoplasticity model that has the rate-dependent format of nonlinear kinematic hardening rule, which plays a key role in modeling the rate dependence of relaxation behavior. The model does not employ yield or loading/unloading criteria and consists of a flow law and the evolution laws of two tensor and one scalar-valued state variables.

• Tribology and Lubricants
• /
• v.18 no.3
• /
• pp.187-193
• /
• 2002

The half-value breadth off-ray diffraction profile line is generally used for a factor in nondestructive hardness measuring method of steel. In this paper, the problem in using the half-value breadth for the hardness measuring method is evaluated in strain hardened steel. And new hardness measuring method using residual stress is proposed X-ray diffraction test after rolling contact fatigue test of ball bearing with inner race of various hardness are carried out to measure the distribution of residual stress and half-value breadth from surface. The result of this study shows that there is little correlation between half-value breadth and hardness in the higher strength region and in the region increasing the hardness by strain hardening. But the magnitude of residual stress on/under race after rolling contact fatigue test becomes clearly to be correlative with hardness. Thus, it is concluded that the hardness of strain hardened steel can be estimated by this relationship between residual stress and hardness.

• Microbiology and Biotechnology Letters
• /
• v.23 no.1
• /
• pp.81-86
• /
• 1995

A Streptomyces strain YS-943, which produced amino acid antimetabolite, was isolated from soil. During the course of screening for new amino acid antimetabolites from the culture broth of Actinomycetes, we found that the strain produced a substance active against Gram-positive bacteria and its activity was reversed by L-methionine and L-histidine on the synthetic minimal agar medium in the culture broth.The morphological and cultural characteristics serve to identify the producing organism strain YS-943 as the genus Streptomyces. Fermentation was carried out in the synthetic medium at 28$\CIRC$C for 48 hours. The fermentation yield reached about 12 mg per liter of the broth. The YS-943 substance was obtained as white powder, mp 194$\CIRC$C and has the molecular formular of C$_{4}$H$_{8}$N$_{2}$O$_{4}$. Its structure was determined to be o-carbamyl-D-serine by spectroscopic data. It is active against some Gram-positive bacteria and reversed by L-methionine and L-histidine.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.3
• /
• pp.431-437
• /
• 2006

Aero-tolerant microorganisms were isolated from healthy Koreans over the age of 95 years. The microorganisms were then identified based on their morphological and biochemical characteristics and 16S rDNA sequences. The growth properties of the isolated strains were investigated in kimchi. The characteristics of kimchi containing the microorganisms were studied microscopically, physicochemically, and organoleptically. Among 7 aero-tolerant strains, a strain with a 16S rDNA sequence exhibiting 99% homology with Bifidobacterim animalis strain B83 was selected and named B. animalis DY-64. The new strain showed a better acid resistance and salt resistance (p<0.05) than B. animalis ATCC 25527. After 15 days of fermentation in kimchi, the viability of B. animalis DY-64 was about 10%, and the kimchi had a better overall edible quality than conventional kimchi. Thus, it was found that the application of B. animalis DY-64 to kimchi preparation produced a good overall edible quality.

• Journal of the Korean Society of Combustion
• /
• v.8 no.1
• /
• pp.36-45
• /
• 2003

The subject of turbulent premixed flames has been focused by many researchers for a number of decades. Especially, Borghi suggested a magnificent diagram classifying turbulent combustion areas and Lipatnikov and Chomiak modified this diagram. Recently, experimental techniques have been developed so that we can use PIV for measuring 2D velocity field and apply OH PLIF techniques for obtaining flame locations. In present study, a new diagram is proposed using strain rates and OH signal intensity. Thus, simultaneous PIV and OH PLIF measurements are used for shear strain rates and flame locations, respectively. It is believed that the shear strain rates represent flow characteristics such as turbulence intensity and the OH intensity indicates the flame characteristics such as burning velocities.

• Structural Engineering and Mechanics
• /
• v.38 no.1
• /
• pp.81-97
• /
• 2011

In this research, the wavelet transform is used to analyze time response of a cracked beam carrying moving mass for damage detection. In this respect, a new damage detection method based on the combined use of continuous and discrete wavelet transforms is proposed. It is shown that this method is more capable in making damage signature evident than the traditional two approaches based on direct investigation of the wavelet coefficients of structural response. By the proposed method, it is concluded that strain data outperforms displacement data at the same point in revealing damage signature. In addition, influence of moving mass-induced terms such as gravitational, Coriolis, centrifuge forces, and pure inertia force along the deflection direction to damage detection is investigated on a sample case. From this analysis it is concluded that centrifuge force has the most influence on making both displacement and strain data damage-sensitive. The Coriolis effect is the second to improve the damage-sensitivity of data. However, its impact is considerably less than the former. The rest, on the other hand, are observed to be insufficient alone.

• Smart Structures and Systems
• /
• v.3 no.3
• /
• pp.263-280
• /
• 2007

In this paper, an improved GA-based damage detection algorithm using a set of combined modal features is proposed. Firstly, a new GA-based damage detection algorithm is formulated for beam-type structures. A schematic of the GA-based damage detection algorithm is designed and objective functions using several modal features are selected for the algorithm. Secondly, experimental modal tests are performed on free-free beams. Modal features such as natural frequency, mode shape, and modal strain energy are experimentally measured before and after damage in the test beams. Finally, damage detection exercises are performed on the test beam to evaluate the feasibility of the proposed method. Experimental results show that the damage detection is the most accurate when frequency changes combined with modal strain-energy changes are used as the modal features for the proposed method.

• Geomechanics and Engineering
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2017

An experimental technique for determining the spalling strength of rock-like materials under a high strain rate is developed. It is observed that the spalling strength of a specimen can be determined by only knowing the wavelength, loading peak value and length of the first spallation of an incident wave under a specific loading waveform. Using this method in combination with a split-Hopkinson pressure bar (SHPB) and other experimental devices, the spalling strength of granite specimens under a high strain rate is tested. Comparisons with other experimental results show that the new measuring method can accurately calculate the dynamic tensile strength of rock materials under a high strain rate.

• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.617-623
• /
• 1995

A new thermotolerant yeast strain was siolated, and its characteristics have been studied. The strain was identified and named Saccharomyces cerevisiae F38-1. This strain could grow not only at high temperature, but also in high concentrations of sugar and ethanol. S. cerevisiae F38-1 could grow in a medium containing 50% glucose. The isolate produced ethanol at 43$\circ$C, but didn't grow at 40$\circ$C in the presence of 8% ethanol. Fermentation studies showed that the isolate ferments 20% glucose to 9.8% (V/V) ethanol at 40$\circ$C in the presence of 0.2%, yeast extract.