• 한국전기전자재료학회논문지
• /
• 제26권7호
• /
• pp.555-562
• /
• 2013

The new recycling technology for aged aluminum wires in overhead conductor has been carried out. The authors are attempting to develop remanufacturing method for them for more effective way of recycling in stead of its conventional remelting process. The new recycling technology for aged aluminum wire in overhead conductor was composed of four steps in different develop process, destranding process for conductor, surface cleaning process, welding process and drawing process for aluminum wire. This paper investigates the properties during recycle process of aged aluminum wire. The results of microscopic analysis and mechanical properties were discussed to underscore recycling aluminum wire. Various graphs are presented accompanied by discussion about their relevance on the process. In conclusion, we confirmed the possibility of remanufacturing technique by using new process.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.633-636
• /
• 2006

In order to determine new settings of key process variables optimally, a new rule induction method through a historical data is proposed without using an explicit functional model between process and quality variables. First, a partial least square is used to reduce the dimensionality of the process variables. Then new process settings that yield the best quality variable are identified by sequentially partitioning the reduced latent variable space using a patient rule induction method. The proposed method is illustrated with a case study obtained from steel-making processes. We also show, through simulation, that the proposed method gives more stable results than estimating an explicit function even when the form of the function is known in advance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.251-254
• /
• 1999

A new multi-seeding process for the growth of YBa$_2$Cu$_3$Oxx single crystals was developed. This process introduces an additional heating step to peritectic temperature and a subsequent slow cooling step to the growth temperature following the point when the crystals contacted. The crystal growth was resumed thereafter. The results obtained with this new process were compared with those of the conventional growth process, in which materials were only kept at the growth temperature. It was observed that the liquid phase between crystals were almost completely eliminated, but that Y2ll grains were grown during this new process. There was no significant improvement in trapped magnetic field over the conventional process, which is believed to be due to the cracks generated during the oxygen heat treatment or to the growth of YBa$_2$Cu$_3$Ox grains.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.311-315
• /
• 2008

Currently, in automobile industry. the efforts to reduce the manufacturing cost by changing the process of manufacturing are continually performed. In this paper, we proposed a new manufacturing process, the roll bending of a ring plate of automotive fuel tank instead of conventional press blanking process to reduce material loss and manufacturing cost. Finite element analysis was used to optimize the roll bending process to assure rectangular cross-section of the ring plate. Also, spring-back analysis after the roll bending was performed and dimension of the bending die considering spring-back was analyzed. Finally, we verified a possibility for realization of the proposed method shape with prototypes.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.422-428
• /
• 2001

This paper provides a brief overview of the process for the introduction of new train in England since privatization in 1994. They have railway safety case which the safety management for the introduction of new trains is to be considered in all process including design, manufacturing, test, maintenance etc. To achieve safety in track, they also consider evidence available from the design and build process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.509-516
• /
• 2009

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding force and the punch load. As a result, if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum value of process variables.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.179-186
• /
• 2002

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding farce and the punch load. As a result. if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum vague of process variables.

• Journal of information and communication convergence engineering
• /
• 제9권4호
• /
• pp.379-384
• /
• 2011

The scope of the problems that could be solved by monitoring and the improvement of the recognition time is directly correlated to the performance of the management function of the business process. However, the current monitoring process of business activities decides whether to apply warnings or not by assuming a fixed environment and showing expressions based on the design rules. Also, warnings are applied by carrying out the measuring process when the event attribute values are inserted at every point. Therefore, there is a limit for distinguishing the range of occurrence and the level of severity in regard to the new external problems occurring in a complicated environment. Such problems cannot be ed. Also, since it is difficult to expand the range of problems which can be possibly evaluated, it is impossible to evaluate any unexpected situation which could occur in the execution period. In this paper, a process-evaluating model based on the goal scenario is suggested to provide constant services through the current monitoring process in regard to the service demands of the new scenario which occurs outside. The new demands based on the outside situation are analyzed according to the goal scenario for the process activities. Also, by using the meta-heuristic algorithm, a similar process model is found and identified by combining similarity and interrelationship. The process can be stopped in advance or adjusted to the wanted direction.

• Communications for Statistical Applications and Methods
• /
• 제6권1호
• /
• pp.77-88
• /
• 1999

A new measure of the process capability index(PCI) $\textit{C}_{cpk}$ is proposed that takes into account the proximity to the target value as well as process mean and process variation when we assessing process performance. using the semivariance estimators proposed by Choobineh and Branting (1986) and Josephy and Aczel (1993) the estimator($\textit{C}_{cpk}$) of new index has been solved and the properties of these estimators have been examined through simulations. Also we compare the performance between $\textit{C}_{cpk}$ and $\textit{C}_{jpk}$ which is developed by Johnson kotz and Pearn(1992).

• Industrial Engineering and Management Systems
• /
• 제10권3호
• /
• pp.191-196
• /
• 2011

The purpose of this paper is to study user's involvement in new product development (NPD). It seeks to identify the factors involving user and design practices in the design process of new product development. A survey was conducted on 20 respondents consisting of designers involved in product development from various industries. The study focused on the early activities of the product design process which is called product specification. The analysis performed considers the importance of involving users in design decision. The outcome of this research is the significance of involving users and its effect on product development activities. The research also provides a model for an integrated user, designer and product knowledge activity in the product development process.