• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 추계학술대회
• /
• pp.19-29
• /
• 2005

Since 1980's, many enterprises have constructed Strategy Information System and tried BPR, ISP. Also, they implemented ERP and practiced the Process Innovation and Six Sigma for Management Innovation in todays, Although most companies had provious good plans, but those are not satisfied. Because of failed to change management and continued next activity. Many Project for Process innovation are ended as disposal project in many case, if they want next project, they need a new plan which needs additional fund and re source. This paper studied Process Innovation and Six Sigma in many things and proposed new model for continued project on the master plan. Also it proposed next study subject about ERP Optimization and Harmonization after implemented ERP which is considered as next step of PI.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1404-1409
• /
• 2007

Polymers for laser sintering were needed in order to fabricate the articles with the three-dimensional duplication equipment of SLS (selective laser sintering) process. The thermal properties, particle size, distribution, and shape of polymer powder had a close relation with the processibility of laser sintering. In this study, we prepared new polymer powders with uniform size and higher bulk density by wet process. Wet process consists of several finely-controlled steps such as dissolution, nucleation, propagation and crystallization. Several additives were added to improve the thermal, rheological, and flow properties.

• 디자인학연구
• /
• 제19권3호
• /
• pp.5-18
• /
• 2006

Digital information society shows a variety of contents of cross-categorial digital media in their inner or outer forms and concepts of the artistic aspects. In order to cope with such a complicated, unexpected trend in digital media and its industry, a new approach in the design process needs to be developed and adjusted with the new equipment of the creativity-thinking process of 'the Multi-Sensory Device (MSD),' 'the Multi-Dimensional Device (MDD),' and 'the Storytelling Device (SD)' in the Prism Effect-based Creativity-Thinking Process (PECTP). The PECTP is in principle designed to practically work with the four distinct techniques: 1) Physical Activity, 2) Linguistic Activity, 3) Visual Activity, and 4) Complex Activity. Consequently, this thesis notes that the nature of the cross-categorial design contents is necessarily non-directional since the creativity power inside the Prism Effect results in openness and diversity.

• Industrial Engineering and Management Systems
• /
• 제7권3호
• /
• pp.204-213
• /
• 2008

Companies that produce capital goods need to schedule the production of products that have complex product structures with components that require many operations on different machines. A feasible schedule must satisfy operation and assembly precedence constraints. It is also important to avoid deadlock situations. In this paper a Genetic Algorithm (GA) has been developed that includes a new repair process that rectifies infeasible schedules that are produced during the evolution process. The algorithm was designed to minimise the combination of earliness and tardiness penalties and took into account finite capacity constraints. Three different sized problems were obtained from a collaborating capital goods company. A design of experimental approach was used to systematically identify that the best genetic operators and GA parameters for each size of problem.

• 한국멀티미디어학회논문지
• /
• 제21권8호
• /
• pp.1021-1026
• /
• 2018

3D SCAN enables easy human body measurement via a digital method in the process of film costume production which used to be done manually. Software-oriented computer graphic, which integrates 3D SCAN data in the process of manual film costume production, can induce quick and diverse design outcomes. While, 3D PRINT, which integrates computer graphic data in the process of manual film costume production, can automate the process of special costume production using a digital method. Integration of 3D Scan + Computer Graphic + 3D Print using integrated platforms for tailored costume production as developed in this study allows significant reduction of costume production period and costs. It also allows efficient integration of costume production outcomes in various industries related with OSMU contents in particular. In other words, using it, we can create a new business market that integrates multiple areas of film content, drama content and game content.

• 한국주조공학회지
• /
• 제22권4호
• /
• pp.184-191
• /
• 2002

This study aims to investigate on the effects of alloying elements and heat treatment on the microstructures, wear and heat resistance of Al-Si-Cu-Mg-(Ni)/SiCp prepared by the duplex process developed in previous study, which consists of squeeze infiltration (1st process) and squeeze casting (2nd process). The hardness of composite increased with decrease in SiCp size and Ni addition in both the heat exposured composite and the as-cast one. And the heat and wear resisting properties was improved by the SiCp reinforcement and the Ni addition. The wear amount of Al/SiCp composite decreased with decreasing in the size of silicon carbide particle.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.282-288
• /
• 2002

A new on-line bar joining technology employing the concept of a solid-state joining has been developed for the endless rolling by POSCO, RIST and MHMM Inc.. In the process, the bars are partially descaled, partially overlapped, joined by shearing action and crops are finally removed. The feasibility of the developed process was evaluated in this study in terms of microstructures and mechanical properties of joints, and the response of the joint to rolling.

• 기술혁신연구
• /
• 제11권2호
• /
• pp.239-281
• /
• 2003

This study explored the patterns of activities and interactions among participants in the adoption process of a new system innovation, ADSL, in Korea, using an integrative framework of innovation system and strategic decision-making process for uncertainty reduction. An in-depth case analysis was undertaken to identify the adoption process of ADSL innovation, as a case in point, in conjunction with activities and interactions among related parties such as government, service providers, equipment suppliers, and content providers. The results of case analysis revealed that as the level of uncertainty in the adoption of ADSL innovation decreases, the focus of decision-making activities moves from scoping, to searching, to evaluating and to committing. Also this study found that at the early stage of ADSL adoption with higher level of uncertainty, government plays a pivotal role in coordination of related parties to participate in the innovation process, while service providers replaced this role at later stage of innovation with lower level of uncertainty. This study discussed theoretical and policy implications for the adoption of new system innovations with varying degrees of uncertainty.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1412-1415
• /
• 1996

In this paper, a new identification method of the cascade control system is proposed which can overcome the weak points of Krishnaswamy and Rangaiah(1987)'s method. This new method consists of two steps. One is on-line process identification using the numerical integration to approximate the two process dynamics with a high order linear transfer function. The other is a model reduction technique to derive out low order transfer function(FOPTD or SOPTD) from the obtained high order linear transfer function to tune the controller using usual tuning rules. While the proposed method preserves the advantages of the Krishnaswamy and Rangaiah(1987)'s method, it has such a simplicity that it requires only measured input and output data and simple least-squares technique. Simulation results show that the proposed method can be a promising alternative in the identification of cascade control systems.

• 산업기술연구
• /
• 제22권B호
• /
• pp.79-88
• /
• 2002

This paper deals with a case study on the process improvement and the layout design of a boiler factory with FactoryCAD. Firstly, two alternatives of job reallocation are suggested with the understanding of problems in current process. The layout planning for these new alternatives is carried out by simple procedure and the detailed analyses are performed by the aid of FactoryCAD program. The result shows that the new layout plan brings on about 10% reduction of travel distance. The utilization of FactoryCAD program can simplify the process of layout design.