• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.562-570
• /
• 2016

At the carbon dioxide capture process using the aqueous amine solution, degradation of absorbents is main factor to reducing the process performance. Also, degradation mechanism of absorbent is important for understanding the environmental risk, route of degradation products, health risk etc. In this study, the degradation products of MEA were studied to clarify mechanism in thermal degradation process. The degradation products were analyzed using a $^1H$ NMR (nuclear magnetic resonance) and $^{13}C$ NMR. The analysis methods used in this study provide guidelines that could be used to develop a degradation inhibitor of absorbent and a corrosion inhibitor.

• 대한산업공학회지
• /
• 제38권3호
• /
• pp.227-236
• /
• 2012

New 5-digit zone code (new postcode) will replace the current 6-digit postcode which has been used for postal automation in 2014. New postcode will be used for processing various works to distinguish location and area in the entire country. For example, it new postcode will be used to denote different administration areas, firefighting and police jurisdiction, weather forecast areas, emergency medical facility areas, social welfare institution areas, election districts, school districts, statistical areas, courier and delivery business areas, and etc. Therefore, the relevant authorities must be cosider for the feasibility and applicability of assigning the new postcode. In postal service, postal process will be affected a lot by new postcode because a postcode has been related with delivery area of a postman. Therefore, we propose assignment scheme for new postcode which will impact less to postal process. Then, we present how we used geographic data for efficient assignment and analysis of the results.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 2005년도 27회 하계학술발표회 논문집
• /
• pp.44-68
• /
• 2005

The purpose of this paper is to analyze the organizational design and management of product development in creating new product architecture by an established firm. For the purpose, the paper put up the organizational design in the process of PDA(Personal Digital Assistant) development of Sharp and Casio which were Japanese major PDA firms in 1990s. PDA is the product born through architectural change from Electronic Organizer. Prior research on the product architecture change and organizational adaptation emphasized that an established firm is difficult to adapt to new product architecture due to the restriction of prior technology or organizational inertia. For overcoming these problems and successful development of new product architecture, organizational design and management in the process of product development becomes essential. In case of Sharp, corporate development project team had been used to overcome the restrictions from architectural knowledge accumulated through previous product. After launching first new PDA by corporate development project team, Sharp created a new division and pushed an evolution of PDA, when new PDA market start to grow up rapidly toward a major market segmentation. As a result, Sharp was able to build up stable PDA project trajectory. However, Casio was late for three years in launching of new PDA architecture because previous division charging of Electronic Organizer tried to develop first new PDA. Casio's PDA development was prohibited by engineers of previous division because new PDA architecture was inferior on user interface and display definition. That is, Casio's first PDA development was restricted by architectural knowledge of previous product.

• 대한안전경영과학회지
• /
• 제3권3호
• /
• pp.175-190
• /
• 2001

We propose, a new process capability index $C_{psk}$(WV) applying the weighted variance control charting method for non-normally distributed. The main idea of the weighted variance method(WVM) is to divide a skewed or asymmetric distribution into two normal distributions from its mean to create two new distributions which have the same mean but different standard deviations. In this paper we propose an example, a distributions generated from the Johnson family of distributions, to demonstrate how the weighted variance-based process capability indices perform in comparison with another two non-normal methods, namely the Clements and the Wright methods. This example shows that the weighted valiance-based indices are more consistent than the other two methods in terms of sensitivity to departure to the process mean/median from the target value for non-normal processes. Second method show using the percentage nonconforming by the Pearson, Johnson and Burr systems. This example shows a little difference between the Pearson system and Burr system, but Johnson system underestimated than the two systems for process capability.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.42-51
• /
• 1999

An experimental modeling of cutting and structural dynamics and the on-line detection of malfunction process is substantial not only for the investigation of the static and dynamic characteristics of cutting process but also for the analytic realization of diagnostic systems. In this regard, We have discussed on the comparative assessment of two recursive time series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision round shape machining such as turning, drilling and boring in mold and die making. In this study, simulation and experimental work were performed to show the malfunctioned behaviors. For this purpose, two new recursive approach (REIVM, RLSM) were adopted fur the on-line system identification and monitoring of a machining process, we can apply these new algorithm in real process for the detection of abnormal machining behaviors such as chipping, chatter, wear and round shape lobe waviness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.844-847
• /
• 2001

The application of laser direct etching has been discussed, and believed that the process is a very powerful method for micro machining. This study is focused on the micro patterning technology using laser direct etching process with no chemical damage of the material surface. A new introduced concept of energy synergy effect for surface micro machining is the combination of chemically ion reaction and laser thermal process. The etchant can't etch the material in room temperature, and used Ar laser has not power enough to machine. But, the machining is occurred in local area of the material by the combined energy. Using this process, the material is especially prevented from chemical damage for electric property. We have tested this new concept, and achieved a line with $1{mu}m$ width. The Ar laser with 488nm wavelength was used. The material was Si(100) wafer, and etchant is KOH solution. The application and flexibility of this process is in great hopes for MEMS structures and fabrication of the micro electric device parts.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.249-252
• /
• 1997

Mini-mill process which is one of the new steel making process to be able to produce the hot rolled strip by thin slab caster, was completed in the kwangyang steel work. The new process was constructed liquid core deduction, tandem reduction unit, induction heater, coil box and finishing mill to be varied width. Therefore, in oder to make sure of target strip width, analysis of actual plant data was done to fine out amount of width deviation. Finally, the predication system of width in the mini-mill process was developed to included temperature caculation model.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.

• International Journal of Costume and Fashion
• /
• 제15권2호
• /
• pp.79-91
• /
• 2015

Creativity is an ever-increasing research area related to fashion design, namely the documentation and dissemination of creative scholarship. The purpose of this project is to apply creative bridge or creative leap theory to the development of an existing designer's garment collection using the creative design process of an architect. A single case study design was used to investigate the phenomenon of design process creative leap using a direct observation. Results indicate the difficult challenge of producing new and individualized silhouettes for the marketability of clothing, it is apparent that new methods of fostering creativity in designers through non-traditional approaches would benefit the education of apparel designers. Through targeted design practice, educators and practitioners can apply the principles of scientific inquiry into design processes to solve a problem, address a challenge, or create based on personal inspirations.

• 한국경영과학회지
• /
• 제30권1호
• /
• pp.95-104
• /
• 2005

A desirability function approach to a multiresponse problem is proposed considering process parameter fluctuation which may amplify the variance of response. It is called POE (propagation of error), which is defined as the standard deviation of the transmitted variability in the response as a function of process parameters. In order to obtain more robust process parameter setting, a new desirability function is proposed by considering POE as well as distance-to-target of response and response variance. The proposed method is illustrated using a rubber product case in Ribeiro et al. (2000).