• Journal of Technology Innovation
• /
• v.13 no.1
• /
• pp.25-54
• /
• 2005

In this study, priority setting model of new promising IT industries which will be the growth engines for the Korean IT industry, was established. Based on the AHP model, priority setting of IT new promising IT industries was conducted. Firstly, the selection cases of the new promising IT industries and major priority setting methodologies including the AHP methodology, were analyzed. The AHP model was selected as the most feasible methodology for priority setting of the new IT industries, among the various priority setting methodologies. Secondly, in setting up the AHP model for prioritization of the new promising If industries, a 'goal' was established to be priority setting of the new promising IT industries, and an 'alternatives' to be 18 new promising IT industries. Then a logical and a systematic assessment criteria including 5 main criteria('Technological Innovation', 'Market Ability', 'SPin-off Effect', 'Public Benefit', 'Strategic Importance') and 14 sub-criteria, were developed for priority setting of the 18 new promising industries. Finally, with the AHP model, the substantial analysis was made to set up priority of the 18 new promising IT industries. The substantial analysis showed the following priority setting results and implications for the 18 new promising IT industries.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.173-178
• /
• 2000

New prediction model is investigated estimating splitting tensile strength and modulus of elasticity with curing temperature and aging. New prediction model is based on the model which was proposed to predict compressive strength, and splitting tensile strength and modulus of elasticity calculated by this model are compared with experimental values. New prediction model well estimated splittinge tensile strength and elastic modulus as well as compressive strength.

• Journal of Korean Academy of Nursing
• /
• v.35 no.2
• /
• pp.323-335
• /
• 2005

Purpose: The purpose of this study was to examine the problems and relevant variables for effective Organizational Socialization of new nurses, to produce a causal map, to build up a simulation model and to test its validity. Method: The basic data was collected from Sep. 2002 to July 2003. The Organizational Socialization process of new nurses was analyzed through a model simulation. The VENSIM 5.0b DSS program was used to develop the study model. Result: This Model shows interrelation of these result variables: organizational commitment, job satisfaction, job performance, intention of leaving the work setting, decision making ability, and general results of Organizational Socialization. The model's factors are characteristic of organization and individual values, task-related knowledge and skills, and emotion and communication that affects new nurses' socialization process. These elements go through processes of anticipatory socialization, encounter, change and acquisition. The Model was devised to induce effective Organizational Socialization results within 24 months of its implementation. The basic model is the most efficient and will also contribute to the development of knowledge in the body of nursing. Conclusion: This study will provide proper direction for new Nurse's Organizational Socialization. Therefore, developing an Organizational Socialization Process Model is meaningful in a sense that it could provide a framework that could create effective Organizational Socialization for new nurses.

• Structural Engineering and Mechanics
• /
• v.5 no.3
• /
• pp.221-237
• /
• 1997

This paper presents a new uniaxial material model for rate-sensitive analysis addressing both the transient and steady-state responses. The new model adopts visco-plastic theory for the rate-sensitive response, and employs a three-parameter representation of the overstress as a function of the strain-rate. The third parameter is introduced in the new model to control its transient response characteristics, and to provide flexibility in fitting test data on the variation of overstress with strain-rate. Since the governing visco-plastic differential equation cannot be integrated analytically due to its inherent nonlinearity, a new single-step numerical integration procedure is proposed, which leads to high levels of accuracy almost independent of the size of the integration time-step. The new model is implemented within the nonlinear analysis program ADAPTIC, which is used to provide several verification examples and comparison with other experimental and numerical results. The companion paper extends the three-parameter model to trilinear static stress-strain relationships for steel and concrete, and presents application examples of the proposed models.

• Structural Engineering and Mechanics
• /
• v.52 no.4
• /
• pp.767-786
• /
• 2014

This paper presents the design of reinforced concrete circular footings subjected to axial load and bending in two directions using a new model. The new model considers the soil real pressure acting on contact surface of the circular footings and these are different, with a linear variation in the contact area, these pressures are presented in terms of the axial load, moments around the axis "X" and the axis "Y". The classical model takes into account only the maximum pressure of the soil for design of footings and it is considered uniform at all points of contact area. Also, a comparison is presented in terms of the materials used (steel and concrete) between the two models shown in table, being greater the classical model with respect the new model. Therefore, the new model is the most appropriate, since it is more economic and also is adjusted to real conditions.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1891-1897
• /
• 2006

In this study, a new model to predict the effective elastic constants of composites with spherical fillers is proposed. The original Eshelby model is extended to a finite filler volume fraction without using Mori-Tanaka's mean field approach. When single filler is embedded in the matrix, the effective elastic constants of the composite are computed. The composite is in turn considered as a new matrix, where new single filler is again embedded in the matrix. The predicted results by the present model with a series of embedding procedures are compared with those by Mori-Tanaka, self-consistent, and generalized self-consistent models. It is revealed through parametric studies such as stiffness ratio of the filler to the matrix and filler volume fraction that the present model gives more accurate predictions than Mori-Tanaka model without using the complicated numerical scheme used in self-consistent and generalized self-consistent models.

• Journal of Biomedical Engineering Research
• /
• v.22 no.4
• /
• pp.331-338
• /
• 2001

In this paper, we have proposed a new computer retina model reflecting the mechanism of transient amacrine cell on the basis of a conventional computer retina model to understand mechanism of visual information processing. The conventional computer retina model contained most of mechanism for other retina models and it was verified with the physiological data. However, we found that a conventional computer retina model doesn't have the mechanism of amacrine cell that was likely to respond to moving stimulus. In proposed model, therefore, a conventional computer model that considered from photoreceptors to bipolar cells and a new computer model that considered for transient amacrine cell and ganglion cell was combined. As we compared the physiological data with the results of computer simulation of transient amacrine cell about fixed stimulus and moving stimulus, we confirmed that the proposed new computer retina model was normally operated.

• Korean Management Science Review
• /
• v.28 no.1
• /
• pp.11-24
• /
• 2011

In this paper, we develop a new conceptual framework for finding new business opportunities in the cloud computing environment. We propose a service model framework for cloud computing business. In the service concept of the proposed business model, we categorize customer needs and service offering value, while we analyze customer behavior for developing revenue model. In addition, we analyze cloud computing market drivers for finding an evolution path of the proposed business model. Finally, we develop cloud computing business strategies for Korean IT service industry.

• Journal of Korean Society of Transportation
• /
• v.9 no.2
• /
• pp.75-86
• /
• 1991

A conventional track structure system of rails ties ballast subballast and subgrade. An adequate engineering analysis require consideration of all major components of track system. This paper briefly reviews existing methods of track analysis and presents a new model based of the examination of the Tallbot Model. The new model has been validated by comparision with settlements from other model.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.9
• /
• pp.431-439
• /
• 2001

This Paper illustrates a new numerical analysis method using a nodal effective load model for nodal probabilistic production cost simulation of the load point in a composite power system. The new effective load model includes capacities and uncertainties of generators as well as transmission lines. The CMELDC(composite power system effective load duration curve) based on the new effective load model at HLll(Hierarchical Level H) has been developed also. The CMELDC can be obtained from convolution integral processing of the outage capacity probabilistic distribution function of the fictitious generator and the original load duration curve given at the load point. It is expected that the new model for the CMELDC proposed in this study will provide some solutions to many problems based on nodal and decentralized operation and control of an electric power systems under competition environment in future. The CMELDC based on the new model at HLll will extend the application areas of nodal probabilistic production cost simulation, outage cost assessment and reliability evaluation etc. at load points. The characteristics and effectiveness of this new model are illustrated by a case study of MRBTS(Modified Roy Billinton Test System).