• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3969-3980
• /
• 2024

Over the years, numerous evaluations of material attractiveness have been performed for conventional light water reactors to better understand the nature of the spent fuel material and its desirability for misuse at different points in the nuclear fuel cycle. However, availability of such assessments for newer, Generation IV reactors such as Molten Salt Reactors is rather limited. In the present study we address the gap in knowledge of material attractiveness for molten salt reactor systems and describe the nature of irradiated fuel salts which the nuclear safeguards community might be faced with in the near future as more and more such reactors enter commission and operation. Within the scope of the paper, we use a large database of simulated irradiated fuel salt isotopics (and other derived quantities such as gamma activity, decay heat, and neutron emission rates) developed specifically for a molten salt reactor concept in order to shed some light on possible weapons usability of uranium and plutonium present in the irradiated fuel salts. This has been achieved by proposing a new attractiveness metric that is better suited for quantifying attractiveness of irradiated salts from a model molten salt concept. The said metric has been computed using a database that has been created by simulating the irradiation of molten fuel salt in a concept core over a wide range of operational parameters (burnup, initial enrichment, and cooling time) using the Monte-Carlo particle transport code, Serpent. With the help of this attractiveness metric, the findings from this study have shown that in relative terms, molten salt spent fuel is more attractive than spent fuel produced by a conventional light water reactor. The findings also underscore the need for strengthened safeguards measures for such spent fuel. These results are expected to be useful in the future for regulatory authorities as well as for nuclear safeguards inspectors for designing a functional safeguards verification routine for irradiated fuel of such unique nature.

• The KIPS Transactions:PartA
• /
• v.13A no.4 s.101
• /
• pp.371-380
• /
• 2006

This paper utilizing model picture of finished clothes in fashion design field various material (textile fabrics) doing Draping directly can invent new design, and do not produce direction sample or poetic theme width and confirm clothes work to simulation. Also, construct database about model and material image and embodied system that can confirm Mapping result by real time. And propose clothes simulation system to dress to 3D human body model of imagination because using several cloth pieces first by process to do so that can do simulation dressing abstracted poetic theme width to 3D model here. Proposed system creates 3D model who put clothes by physical simulation that do fetters to mass-spring model after read 3D human body model file and 2D foundation pattern file. System of this treatise examines collision between triangle that compose human body model for realistic simulation and triangle that compose clothes and achieved reaction processing. Because number of triangle to compose human body is very much, this collision examination and reaction processing need much times. To solve this problem, treatise that see could create realistic picture by method to diminish collision public prosecutor and reaction processing number, and could dress clothes to imagination human body model within water plant taking advantage of Octree space sharing techniques.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.227-234
• /
• 2008

This study examines which models are more suitable for representing mechanical property of unbound materials to analyze behavior of asphalt pavement structure. Results from FWD (Falling Weight Deflectometer) test were used to apply to nonlinear elastic model. The new method which can deduct material constants of nonlinear elastic model is suggested from FWD test data rather than laboratory resilient modulus ($M_R$) test. It is confirmed that the material constants are within the common range in subbase. Test output from FWD and MDD (Multi-Depth Deflectometer) was used to verify reliability of the model. From the results of verification, this study shows that a non-linear elastic model agrees to MDD test data more than a linear elastic model does.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.1-11
• /
• 2005

Several Solid Freeform Fabrication Systems(SFFS) are commercialized in a few companies for rapid prototyping. However, they have many technical problems including the limitation of applicable materials. A new method of agile prototyping is required for the recent manufacturing environments of multi-item and small quantity production. The objectives of this paper include the development of a novel method of SFFS, the CAFL/sup VM/(Computer Aided Fabrication of Lamination for Various Material), and the manufacture of the various material samples for the certification of the proposed system and the creation of new application areas. For these objectives, the technologies for a highly accurate robot path control, the optimization of support structure, CAD modeling, adaptive slicing was implemented. However, there is an important problem with the conventional 2D lamination method. That is the inaccuracy of 3D model surface, which is caused by the stair-type surface generated in virtue of vertical 2D cutting. In this paper, We design the new control algorithm that guarantees the constant speed, precise positioning and tangential cutting on the 5DOF SFFS. We develop the tangential cutting algorithm to be controlled with constant speed and successfully implemented in the 5DOF CAFL/sup VM/ system developed in this paper. Finally, this paper confirms its high-performance through the experimental results from the application into CAFL/sup VM/ system.

• Steel and Composite Structures
• /
• v.21 no.2
• /
• pp.249-266
• /
• 2016

The interest of this article lies in the proposition of using bionic method to develop a new sound absorber and analyze the efficient of this absorber in a ski cabin. Inspired by the coupling absorption structure of the skin and feather of a typical silent flying bird - owl, a bionic coupling multi-layer structure model is developed, which is composed of a micro-silt plate, porous fibrous material and a flexible micro-perforated membrane backed with airspace. The finite element simulation method with ACTRAN is applied to calculate the acoustic performance of the multi-layer absorber, the vibration modal of the ski cabin and the sound pressure level (SPL) near the skier's ears before and after pasting the absorber at the flour carpet and seats in the cabin. As expected, the SPL near the ears was significantly reduced after adding sound-absorbing material. Among them, the model 2 and model 5 showed the best sound absorption efficiency and the SPL almost reduced 5 dB. Moreover, it was most effctive for the SPL reduction with full admittance configuration at both the carpet and the seats, and the carpet contribution seems to be predominant.

• Health Policy and Management
• /
• v.9 no.1
• /
• pp.156-177
• /
• 1999

The current method of rate adjustment for inflation is based on the evaluation of the financial performance of hospitals. The method has the disadvantage such as too complicated, expensive process as well as low reliability. This study, therefore, develops the 'Korean Medical Insurance Economic Index(MIEI)' as a new model for the rate adjustment with the use of the macro economic indices. In addition, we calculate the 1992∼1998 rate adjustment with the MIEI, and examines the validity of the MIEI by comparing with the conventional method. Medical costs are classified into nine categories : physician salaries, nurse·pharmacist·medical technician salaries, assistants & others salaries, material cost(by imports), material cost(by domestics), depreciation & rent paid(by imports), depreciation & rent paid(by domestics), power utilities, other administrative costs. Then the category weight which is the ratio of category in the total cost is calculated. Macro economic indices are selected for each cost category in order to reflect the concept of the each cost category and inflation during the year of 1992∼1998. Finally MIEI which integrate all category according to the category weight and selected macro indices is calculated. The mean of hospital MIEI which weighting by amount paid by insurers was cacluated. The result from the application of empirical data to the MIEI model is very similar to that of the current method. Furthermore, this method is very simple and also easy to get social consensus. This MIEI model can be replaced the current method based on the analysis of the financial performance for the adjustment of medical fees.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.2
• /
• pp.11-20
• /
• 2009

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing the design parameter for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 21 kinds of the laboratory model tests with the end restraint conditions of the reinforcement that comprises the constrained and partially constrained (3 types) conditions were conducted. Moreover, a new procedure was proposed to take into account the effect of the stiffness of Reinforce materials on bearing capacity theory of Surface Reinforcement Method for Soft Ground.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.639-645
• /
• 2006

FRP (Fiber Reinforced Polymer) is an excellent new constructional material in resistibility to corrosion, high intensity, resistibility to fatigue, and plasticity. FBG (Fiber Bragg Grating) sensor is widely used at present as a smart sensor due to lots of advantages such as electric resistance, small-sized material, and high durability. However, with insufficiency of measuring displacement, FBG sensor is used only as a sensor measuring physical properties like strain or temperature. In this study, FRP and FBG sensors are to be hybridized, which could lead to the development of a smart FRP rod. Moreover, developing the estimated model for deflection with neural network method, with the data measured through FBG sensor, could make conquest of a disadvantage of FBG sensor - uniquely used for sensing strain. Artificial neural network is MLP (Multi-layer perceptron), trained within error rate of 0.001. Nonlinear object function and back-propagation algorithm is applied to training and this model is verified with the measured axial displacement through UTM and the estimated numerical values.

• Journal of Navigation and Port Research
• /
• v.30 no.9
• /
• pp.755-762
• /
• 2006

When we consider to develop a new harbor, the most important factor, we think, is the lowest water depth of waterway and approaching channel for safe navigation of vessel. The existing harbors have been being dredged to meet the international trend of jumbo sized vessels by adopting the new design criteria. As the dredged materials over the expected at the design level were common and there are still lack of land based reclamation area, we have no choice to discharge the dredged materials in open sea area In this study, we analysed the behavior of discharged materials at the dumping area of offshore, which were collected from the dredging work at the waterway in Busan New Port. We measured the tidal currents and analyzed the waters of dumping site after the dumping work. These were used to evaluate the numerical models. Suspended Solids(SS) were introduced to the diffusion model. Because of the characteristic of the dumping site, the speed of initial diffusion and settle down of the discharged materials was so fast. Therefore, we believe that the dumped materials do not cause a significant impact to the marine environment.

• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.61-71
• /
• 2014

PURPOSES : The first generation of wide base tires introduced in the early 1980s was found to cause a significant increase in pavement damage compared to dual-tire assemblies. However, wide base tires have evolved considerably, and a new generation of wide base tire is thought to be comparable to conventional dual tires for pavement damage. A challenge associated with using wide base tires is the accurate quantification of pavement damage induced by these tires. The objective of this study was to investigate the responses of flexible pavement to continuously moving vehicular loading under various tire configurations. METHODS : The comparison of the strain/stress responses of full-depth pavement caused by conventional dual tire assembly and new generation of wide-base tires was performed. The FE model incorporates linear viscoelasticity of asphalt material and continuous moving load using implicit dynamic analysis. RESULTS AND CONCLUSIONS : The result demonstrates that the new wide-base tires caused slightly more fatigue damage and less primary rutting damage in HMA layer than a dual-tire assembly, but caused more secondary rutting damage in subgrade than a dual tire assembly.