• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.600-603
• /
• 2000

Recently, Display devices have become important in the information-oriented society and flat display devices are greatly demanded. Liquid crystal display(LCD) represents one of the most promising devices for large size desk-top monitors, notebook PC and car navigation system. However LCD cannot give forth light itself and must have backlight system. The most popular backlighting system is composed of a lighting-guide plate and CCFL as a lighting source. The number of CCFL must increase up if the area of display is increased. So a new backlighting source with high luminance is needed for large LCDs. In this paper, we proposed a surface discharge FFL with the new electrode structure like the needle shaped electrode as the variation of cell structure to high luminance and low power consumption. In comparison with different electrode structure it has low discharge voltage and current and good optical characteristics. So it has better discharge characteristics than different surface discharge FFL and can be fungible for a backlight as a lighting source in LCDs.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.56-63
• /
• 2018

In this study, a $100cm^2$ cell frame for a molten carbonate fuel cell was designed using CFD analysis. Electrochemical reactions, gas flow, and the heat transfer in $100cm^2$ cell frame were modeled using COMSOL Multiphysics. Two design variables such as the height of the cell frame and the length of the gas input area were determined to obtain minimized temperature distribution and uniform gas distribution. With two design parameter such as height of the cell frame and the length of the gas flow channel, the temperature difference in the cell fame was decreased to $5^{\circ}C$ and the gas uniformity in the flow channel were achieved.

• Design & Manufacturing
• /
• 제14권2호
• /
• pp.1-6
• /
• 2020

Recently, research and commercialization related to the field of cell-based therapeutic drug development has been actively conducted. In order to maintain cell viability and prevent contamination, refrigeration preservation devices, such as CRF (controlled rate freezer) or vapor type LN2 tanks have been developed. On the other hand, the storage container for liquid nitrogen tanks currently on sale minimizes the flow structure to prevent structural defects when stored in a liquid nitrogen tank having a high thermal conductivity than vapor nitrogen. If the cell-based treatment drug is stored in the gaseous LN2 tank as it is, the cell survival after thawing is greatly reduced. It was estimated that the existing storage container structure was a factor that prevented the rapid entry and circulation of gaseous nitrogen into the container. Therefore, this study intends to propose a new supercellular storage container model that can maintain the mechanical strength while maximizing the fluid flow structure. To this end, we estimated that the structural change of the storage container effects on the equivalent stress formed around the through-holes of them when exposed to a cryogenic environment using thermal-structural coupled field analysis. As a result of storage experiments in the gas phase tank of the cell-based therapeutic agent using the developed storage container, it was confirmed that the cell growth rate was improved from 66% to 77%, which satisfied the transportation standards of the FDA(Food and Drug Administration) cell-based therapeutic agent.

• 신재생에너지
• /
• 제5권3호
• /
• pp.26-31
• /
• 2009

Using MBE growth method, GaAs/AlGaAs solar cell structure was grown. Deposited electrodes are Au/Ni/Ge for n-type and Au/Pt/Ti for p-type electrodes were deposited by E-beam evaporator. Indoor light concentrators were devised and fabricated in order to concentrate artificial solar rays. Also mirror and prism and Fresnel lens concentration system with solar simulator were devised and fabricated. Results of solar cell characteristics were measured with shutting system which can control the amount of light. Maximum power density was 2.13 W/$cm^2$ and maximum concentration was 124 sun, when mirror with Fresnel lens was used at $7854\;mm^2$ of shutter hole.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.815-818
• /
• 2003

New sensing and writing schemes for a magneto-resistive random access memory (MRAM) with a twin cell structure are proposed. In order to enhance the cell reliability, a scheme of the low voltage precharge is employed to keep the magneto resistance (MR) ratio constant. Moreover, a common gate amplifier is utilized to provide sufficient voltage signal to the bit line sense amplifiers under the small MR ratio structures. To enhance the writing reliability, a current mode technique with tri-state current drivers is adopted. During write operations, the bit and /bit lines are connected. And 'HIGH' or 'LOW' data is determined in terms of the current direction flowing through the MTJ cell. With the viewpoint of the improved reliability of the cell behavior and sensing margin, HSPICE simulations proved the validity of the proposed schemes.

• 한국정보통신학회논문지
• /
• 제24권9호
• /
• pp.1193-1201
• /
• 2020

이동통신에서 이동단말의 위치관리를 위해 셀 구조를 결정하는 셀 계획은 네트워크 성능을 결정하는 중요한 연구과제로 다루어지고 있다. 이동통신에서 셀 구조를 계획하는데 영향을 주는 요소 중 위치관리를 위한 신호비용이 가장 중요한 역할을 하고 있다. 본 논문에서는 이동통신에서 리포팅 셀 구조를 가진 네트워크에서 셀 구조를 계획하기 위해 사용되는 모든 셀의 위치관리비용을 최소화 하는 최적화 알고리즘을 제안한다. 제안된 알고리즘은 메타휴리스틱 알고리즘인 타부서치 알고리즘을 사용하며, 제안된 알고리즘은 새로운 이웃해 생성방식을 제안하여 최적해에 가까운 결과를 도출한다. 제안된 알고리즘의 성능을 평가하기 위해 위치관리비용과 알고리즘 수행시간 관점에서 시뮬레이션을 수행하였다. 평가 결과에서 기존의 유전 알고리즘 및 모의 담금질 기법과 비교 평가하여 제안된 알고리즘의 성능이 우수함을 볼 수 있었다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1997년도 춘계연구발표회 논문개요집
• /
• pp.42-43
• /
• 1997

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.266-269
• /
• 2003

TFT LCD mode has some well-documented performance limitations, namely limited viewing angle, inversion of the gray scale levels and poor luminance efficiency because of the necessity of using crossed polarisers attached to the display cell. During the last few years many initiatives have been undertaken to solve these problems by incorporation birefringent films of various designs into the LCD module. Controlling the optical performance of LCDs often requires combination of liquid crystal material properties, cell parameters and optical films. Such optical films have traditionally been made with stretched polymer materials such as polycarbonate, but recently coated liquid crystalline materials have been used to give improved optical films which can greatly enhance the performance of LCDs. We have now developed reactive mesogen materials to add ultra-thin optical layers into the display structure, and these allow the potential for many new applications.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.435-439
• /
• 2010

The purpose of this paper is to design a new management model based on the grill-formed product charscteristic area(PCA) which specify the position of products classified by the level of market and technology. This product characteristic area is composed of 9 cells and the cases sorted by market and technology are analyzed by each cell. Conclusion of this study based on many significant results gained by the various multi-variate analysis is summarized as follows; First, it can be noted that success/failure factor and progress stages are different by each cell. Second, a new management model is designed by combining the Motive Resource, Success/Failure(S/F) factors, and Progress Stages of New Product Development. Third, success products featured a balance between marketing oriented and technically oriented activities. A new attemp that combine S/F factors with development stages by each product cell will be of great usefulness for further study.

• 한국동물학회지
• /
• 제3권2호
• /
• pp.1-4
• /
• 1960

Urticating spicules and poison -secreting cells of the last instar larva in Euproctis flava BREMER was studied histologically. Three kinds of cells in the epidermis of tubercles on the lst to 8th abodominal segments are classified according to the arrangement of their nuclei : smallepidermal cells, large gland cells, and elongated trichogen cells. As a result of Mallory's triple straining , the epicuticle , the papila-like structure apart form the tubules inside which are gathered at the base and connected with a middle layer cell through a canal in the cuticle, and the peripheral of the urticating spcicule are yellow. However, the inside of the spicule , the tubules within the papilla-like structure, the canal in the cuticle , nuclei in the pidermal cells and the thin exocuticle are red although the thich endocuticle is blue. Particularly , the large nuclei in the middle layer cells are bright red, the cytoplasms of which are little and stained red, too, and the inside of the spicules apt to be stained red when they are broken. The contents therefore seem to be continuous between the spicules and the large cells. Presumably , the large cell at the middle layer is not te tormogen cell which Tsutsumi (1958) has described , but the gland cell which secretes the poison-substance into spicules as Pawlowsky and Stein 91927) and Tonkes (1933) pointed out. Whether the pisonous substance is secreted from the gland cell into the cytoplasmic processes of the trichogen cells which stick large middle layer cells during the formation of the new spicule as Tsutsumi (1958) has observed, or the gland cell makes a new connection with the spicule after the spicule is formed is not clear.