Journal of Hydrogen and New Energy (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Design of Cell Frame Structure of Unit Cell for Molten Carbonate Fuel Cell Using CFD Analysis

CFD를 통한 용융탄산염 연료전지 단위전지용 셀 프레임 구조 설계

  • LEE, SUNG-JOO (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology) ;
  • LIM, CHI-YOUNG (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology) ;
  • LEE, CHANG-WHAN (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology)
  • 이성주 (서울과학기술대학교 기계시스템디자인공학과) ;
  • 임치영 (서울과학기술대학교 기계시스템디자인공학과) ;
  • 이창환 (서울과학기술대학교 기계시스템디자인공학과)
  • Received : 2017.12.22
  • Accepted : 2018.02.28
  • Published : 2018.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a $100cm^2$ cell frame for a molten carbonate fuel cell was designed using CFD analysis. Electrochemical reactions, gas flow, and the heat transfer in $100cm^2$ cell frame were modeled using COMSOL Multiphysics. Two design variables such as the height of the cell frame and the length of the gas input area were determined to obtain minimized temperature distribution and uniform gas distribution. With two design parameter such as height of the cell frame and the length of the gas flow channel, the temperature difference in the cell fame was decreased to $5^{\circ}C$ and the gas uniformity in the flow channel were achieved.

Keywords

References

  1. K. S. Lee and H. H. Cho, "Numerical Analysis of Molten Carbonate Fuel Cell Stack Using Computational Fluid Dynamics", Journal of the Korean Electrochemical Society, Vol. 8, No. 4, 2005, pp. 155-161. https://doi.org/10.5229/JKES.2005.8.4.155
  2. M. G. Kang, H. S. Park, H. C. Ham, S. C. Jang, C. W. Yoon, J. Han, S. W. Nam, S. H. Kim, and S. P. Yoon, "Effect of $Cs_2CO_3$ in Li/K and Li/Na Carbonate on the Oxygen Reduction Reaction for MCFC", Journal of The Electrochemical Society, Vol. 163, No. 8, 2016, pp. F962-F967. https://doi.org/10.1149/2.0061609jes
  3. C. Yuh, J. Colpetzer, K. Dickson, M. Farooque, and G. Xu, "Carbonate fuel cell materials", Journal of Materials Engineering and Performance, Vol. 15, No. 4, 2006, pp. 457-462. https://doi.org/10.1361/105994906X117305
  4. C. W. Lee, M. Lee, S. C. Chang, S. P. Yoon, H. C. Ham, and J. Han, "Effect of the flow directions on a 100 cm2 MCFC single cell with internal flow channels", International Journal of Hydrogen Energy, Vol. 41, 2016, pp. 18747- 18760. https://doi.org/10.1016/j.ijhydene.2016.03.188
  5. G. Wilemski, "Simple porous electrode models for molten carbonate fuel cells", J. Electrochem. Soc. Vol. 130, 1983, pp. 117-121. https://doi.org/10.1149/1.2119635
  6. C.Y. Yuh and J.R. Selman, "The polarization of molten carbonate fuel cell electrodes. 1. Analysis of steady-state polarization data", J. Electrochem. Soc., Vol. 138, 1991, pp. 3642- 3648. https://doi.org/10.1149/1.2085473
  7. J. H. Koh, B. S. Kang, and H. C. Lim, "Effect of various stack parameters on temperature rise in molten carbonate fuel cell stack operation", J. of Power Sources, Vol. 91, 2000, pp. 161-171. https://doi.org/10.1016/S0378-7753(00)00463-8
  8. H. Hirata, T. Nakagaki, and M. Hori, "Effect of gas channel height on gas flow and gas diffusion in a molten carbonate fuel cell stack", J. of Power Sources, Vol. 83, 1999, pp. 41-49. https://doi.org/10.1016/S0378-7753(99)00253-0
  9. C. G. Lee, K. S. Ahn, S. Y. Park, H. K. Seo, and H. C. Lim, "Temperature characteristics of the molten carbonate fuel cell stack", Trans. Of the Korean Hydrogen and New Energy Society, Vol. 15, No. 1, 2004, pp. 54-61.
  10. H. Hirata and M. Hori, "Gas-flow uniformity and cell performance in a molten carbonate fuel cell stack", J. of Power Sources, Vol. 63, 1996, pp. 115-120. https://doi.org/10.1016/S0378-7753(96)02459-7