• 제목/요약/키워드: new attachment

검색결과 298건 처리시간 0.02초

아르곤 레이저 조사시 치근면 변화에 관한 주사 전자 현미경적 연구 (The Effects of the Argon Laser Irradiation on the Root Surface : A Scanning Electronic Microscopic Study)

  • 은희종;임성빈;정진형
    • Journal of Periodontal and Implant Science
    • /
    • 제29권4호
    • /
    • pp.861-872
    • /
    • 1999
  • Since pathologic changes of exposed root surface inhibit cell attachment and new attachment of connective tissue have been made, many efforts were apply to change the exposed root surface condition. Scaling and root planing can not remove the endotoxin completely and forms the smear layer which prohibits the new attachment of connective tissue. Therefore, many kinds of chemicals were used for controlling the pathologic change of the root surface. The purposes of this study was to compare and observe the changes of the exposed root surface treated by scaling and root planning, Tetracycline HCl and Argon Laser. After the scaling and root planning of ten extracted premolars, the differences & the root surface among groups were observed under SEM. Control group showed smear layer and irregular amorphous surface. The dentinal tubule was not exposed. The debris and scale like texture were also observed. Tetracycline HCl treated group showed relatively smooth surface and the collagen fiber was observed in the dentinal tubule. Argon Laser treated group showed the most effective results under the conditions of 0.8 to 1.0w irradiation for 0.5 to 1.0 sec with pulse wave. The results of this study showed that the root surface change was associated with the intensity and the duration of Argon Laser irradiation. Further investigation for the surface change with the Argon Laser irradiation is recommended for understanding of clinical effect.

  • PDF

구연산, 테트라싸이클린, 섬유소 전색제로 처리된 상아질면에 대한 결체조직의 조기부착 (EARLY CONNECTIVE TISSUE ATTACHMENT ON DENTIN SURFACE TREATED WITH CITRIC ACID, TETRACYCLINE AND FIBRIN SEALANTS)

  • 이혜자;한수부;고재승
    • Journal of Periodontal and Implant Science
    • /
    • 제23권2호
    • /
    • pp.283-299
    • /
    • 1993
  • The purpose of this study was to observe early connective tissue attachment on dentin surface treated with citric acid, tetracycline, and fibrin sealants and compare their conditioning effects on dentin surface. Experimental dentin blocks conditioned with citric acid, tetracycline or fibrin sealant, and only root planned control block were surgically implanted in the pouch under buccal mucoperiosteal flaps of left mandible, right maxilla, left maxilla, right mandible of 18 male rabbits. Rabbits were sacrificed after 1 and 6 hours, 1, 3, 7 and 14 days after implantation and then specimens including dentin block and surrounding soft tissue were obtained, and prepared for light and transmission electron microscopic examination. 1 and 6 hours after dentin block implantation, there was plasma proteins adsorption followed by fibrin clot formation and no differences among specimens. At the 1-day observation interval, delicate fibrin network was observed in the all groups, and there were proliferative fibroblasts, angiogenesis and macrophage in the all 3-day specimens. Cellular aggregates and abundant connective tissue adhered dentin surface and tetracycline or citric acid treated group showed much proliferative fibroblast and abundant collagen fibers at 1 week. But at 2 week, citric acid treated group showed much proliferative fibroblast and abundant collagen fibers. These observations suggested that new connective tissue attachment to dentin was initiated by the adsorption of plasma proteins to the dentin surface and followed by fibrin clot formation. Tetracycline and citric acid seemed to make dentin surface more biologically favorable for the connective tissue attachment.

  • PDF

난임 시술로 임신된 임산부와 자연 임산부의 출산 시 통증 및 태아애착행위 비교연구 (A Comparative Study of Anxiety, Pain and Maternal-fetal Attachment between Women who became Pregnant after Infertility Treatment and became Pregnant Naturally)

  • 윤희자;이승신;예송희;한아름;임소리;정현정;박점미
    • 여성건강간호학회지
    • /
    • 제22권2호
    • /
    • pp.71-77
    • /
    • 2016
  • Purpose: This study was a comparative study to understand the levels of anxiety, pain and maternal-fetal attachment between women who became pregnant after infertility treatment and became pregnant naturally. Methods: This study used a comparative survey design. Data were collected by 50 couples of natural pregnancy and of who became pregnant after infertility treatment who visited delivery room in C Medical hospital, Seoul. These couples were to have first baby, and cervix dilatation of women was less than 3 cm regardless of diagnosis. Results: The score of anxiety of infertile women was significantly higher than that of naturally pregnant women; however, that of spouses showed no difference. The pain score for infertile women was significantly higher in both the active and transition phases. Pain scores that reported by their spouses did not show differences in either phase. The score of maternal-fetal attachment showed no difference between two groups of women. Conclusion: The result showed the importance of nursing intervention to reduce women's anxiety and pain, through both antenatal-childbirth education programs and assertive nursing interventions. It is necessary to develop and evaluate new intervention which would be more effective for reducing pain and anxiety for couples who became pregnant after infertility treatment.

A novel approach for optimal DG allocation in distribution network for minimizing voltage sag

  • Hashemian, Pejman;Nematollahi, Amin Foroughi;Vahidi, Behrooz
    • Advances in Energy Research
    • /
    • 제6권1호
    • /
    • pp.55-73
    • /
    • 2019
  • The cost incurred by voltage sag effect in power networks has always been of important concern for discussions. Due to the environmental constraints, fossil fuel shortage crisis and low efficiency of conventional power plants, decentralized generation and renewable based DG have become trends in recent decades; because DGs can reduce the voltage sag effect in distribution networks noticeably; therefore, optimum allocation of DGs in order to maximize their effectiveness is highly important in order to maximize their effectiveness. In this paper, a new method is proposed for calculating the cost incurred by voltage sag effect in power networks. Thus, a new objective function is provided that comprehends technical standards as minimization of the cost incurred by voltage sag effect, active power losses and economic criterion as the installation and maintenance costs of DGs. Considering operational constraints of the system, the optimum allocation of DGs is a constrained optimization problem in which Lightning Attachment procedure optimization (LAPO) is used to resolve it and is the optimum number, size and location of DGs are determined in IEEE 33 bus test system and IEEE 34 bus test system. The results show that optimum allocation of DGs not only reduces the cost incurred by voltage sag effect, but also improves the other characteristics of the system.

사용자 만족과 감정적 애착의 이론적 통합 모형에 관한 실증적 연구;핸드폰, MP3 플레이어, TV, 냉장고 사용자를 중심으로

  • 이인성;김진우
    • 한국경영정보학회:학술대회논문집
    • /
    • 한국경영정보학회 2007년도 추계학술대회
    • /
    • pp.245-250
    • /
    • 2007
  • Prior research on the user experience assumes that when users acquire good experience through the usage of a certain device or system, the user satisfaction increases, and the user satisfaction can forecast the user loyalty effectively. However, theoretical model based on the user satisfaction does not reflect users' emotional or relationship-based experience factors which are fostered through users' long-term interaction with a device or system. Therefore, this research developed the new theoretical model based on the concept of emotional attachment and integrated the model to the existing user satisfaction model to overcome theoretical and practical limitations of the user satisfaction concept. Also, this integrated model was empirically evaluated to check its validity by surveying users of 4 kinds of electronic products.

  • PDF

스냅 핏 잠금 형상에 관한 연구 (A Study on the Snap-Fit Locking Feature)

  • 박현기;홍민성
    • 한국공작기계학회논문집
    • /
    • 제15권6호
    • /
    • pp.121-126
    • /
    • 2006
  • Snap-fit is being used in manufacture of plastic products. Integral features using snap-fit are classified as locks, locators and enhancements. Locking features complete the process of attachment by providing physical interference to prevent separation. Looking feature pairs consist of two components, i.e., a flexible latch and a rigid catch and require particular care and attention for their selection. We can make several locking feature pairs by selecting latch and catch, but some parts restrict freedom of selection. Therefore, part designers must know the characteristic properties of generic locking feature forms as considering a specific design problem. In this paper, it has been presented about problem of small size products using locking feature and then introduced new locking feature applicable to small parts.

외과 수술용 Air-Powered Handpiece 개발 (Development of Air-powered Handpiece for Surgical Operation)

  • 윤길상;이영훈;허영무;서태일;최길운
    • 한국정밀공학회지
    • /
    • 제21권3호
    • /
    • pp.188-193
    • /
    • 2004
  • The purpose of this paper is concerned with a development of an air-powered handpiece for surgical operation. The handpiece is the tool of surgical instruments and it can be used to interchange multiple attachments for drilling, pinning, sawing, driving screws and reaming. Most of domestic medical instruments bring in overseas and the air-powered handpiece imported from foreign countries at 100% too. Therefore we develop new air powered handpiece. we research in 2D and 3D modeling, design of air line, analyze structure. The air-powered handpiece composes of body, power supply air-line, elements for mechanical power transmission, attachment, and surgical tools. The handpiece is developed by several processes that 3D design, machining, heat treatment and coating. The developed handpiece is experimented to confirm check the efficiency.

키워드 네트워크 분석을 이용한 NPD 연구의 진화 및 연구동향 (A Study on Recent Research Trend in New Product Development Using Keyword Network Analysis)

  • 편제범;정의범
    • 한국산업정보학회논문지
    • /
    • 제23권5호
    • /
    • pp.119-134
    • /
    • 2018
  • 오늘날 기업은 기술의 급속한 발전, 고객의 다양한 요구로 인해 높은 불확실성과 경쟁 상황에 놓여 있다. 이러한 기업 환경 속에서 지속적인 경쟁우위와 미래 성장 동력을 확보하는 방안 중 가장 중요한 것이 NPD (신제품 개발)와 관련된 문제로, 이는 기업과 학계에 매우 중요한 이슈이다. 이에 본 연구는 NPD 분야의 기존 연구 흐름과 앞으로의 동향을 파악하여 NPD와 관련된 실무자와 연구자들에게 새로운 가치를 제공하고자 한다. 이를 위해 본 연구는 Scopus 데이터베이스를 활용하여 해외 저명한 저널에 게재된 논문의 키워드를 수집하여 키워드 네트워크 분석을 실시하였다. 이를 통해 NPD 분야의 기존 연구 흐름을 파악할 수 있었고, 각 키워드 간의 연결 관계와 시간의 흐름에 따른 변화를 바탕으로 구체적인 연구주제들의 변화 과정을 제시하였다. 또한, NPD 분야에서 선호되는 키워드를 바탕으로 앞으로의 연구 동향을 제시하였다. 본 연구를 통해 NPD 키워드 네트워크는 멱함수 법칙의 분포를 따르고 있는 좁은 세상 네트워크이고, 키워드의 선호에 의해서 링크가 형성되어 네트워크의 성장이 이루어졌음을 확인할 수 있었다. 또한, 컴포넌트 분석 및 중심성분석을 통해 NPD 키워드 네트워크에서는 주로 Innovation(혁신), New Product Innovation(신제품 혁신), Risk Management(리스크 관리), Concurrent engineering(동시공학), Research and Development(연구개발), Product Life Cycle Management(제품 수명주기 관리) 등과 같은 키워드들이 중심성이 높음을 확인하였다. 한편, 시간의 흐름에 따른 키워드의 선호적 연결의 변화를 살펴본 결과, Innovation(혁신), New Product Introduction(신제품 출시), Project Management(프로젝트 관리) 등의 주제를 중심으로 i) 공급업체와 NPD 협업, ii) 시장의 불확실성을 고려한 NPD, iii) 기술 경영 및 지식경영 분야와 통섭을 고려한 NPD, iv) 중소기업 관점의 NPD 등과 같은 주제의 연구가 요구됨을 확인하였다. 본 연구의 분석 결과는 NPD의 연구 동향, 다른 분야와의 학제간 연구를 위한 새로운 연구주제를 결정하는데 유용하게 쓰일 수 있다.