• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.462-464
• /
• 2005

This paper analyses the transient phenomena against single line to ground fault and lightning surge between Korea and Japan on underground power cable systems. For analysis, find proper earthing resistance of neutral grounding system adopted in Japan. This paper is expected to contribute the establishment of proper protection methods against transients on underground power cable systems.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.46-47
• /
• 2006

본 논문은 CD형 초전도 케이블을 22.9kV 다중접지 배전계통에 적용한 경우 불평형 지락 고장이 초전도 케이블에 미치는 영향을 검토하고 이로 인한 중성선 전류의 변화 및 계통보호를 위한 대책을 논한다. 3상 CD형 초전도 케이블을 사용하는 경우 귀로선은 전향선과 전류가 반대이면서 거의 동일한 전류가 흐르므로 회로의 인덕턴스를 크게 줄일 수 있지만 이를 위해 회로를 단락하여 운전하는 경우 지락고장시 영상회로가 별도로 존재하지 않으면 지락전류를 저감시키는 결과를 초래하게 되어 계통보호에 영향을 주게 된다. 본 논문은 EMTDC 프로그램을 활용하여 이 현상을 XLPE 케이블 계통과 비교, 모의하는 한편, 정상적인 보호계전기 동작이 가능토록 하는 대책에 대해 논한다.

• 전기의세계
• /
• v.13 no.1
• /
• pp.1-5
• /
• 1964

철심형 동기발전기를 무부하로 운전하는 중 1상중성점간에 단락사고가 돌발한 경우에 그 단락상의 전기자전류와 계자전류를 표시하는 식을 구하여 본다. 식(12)의 단락전류 $i_{L-N}$을 단수형으로 전개해서 기수배조파와 우수배조파로 분리해서 검토를 하고 계자전류 I는 곧 I=E+2/3( $x_{d}$-x'$_{x}$) $i_{L-N}$cos .theta.의 관계식에서 일단 단락전류 $i_{L-N}$가 구해졌으므로 단지 대입하므로써 간단히 얻어진다. 식(12)와 (17)을 도시하는데 필요한 동기기정수를 $x_{d}$=0.78, $x_{q}$ =0.48, x'$_{d}$=0.21, r=0.03, $T_{0}$=163 및 E=1의 perunit치로 가정한다.it치로 가정한다.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.810-814
• /
• 2001

power transfer breaker is a device used to transfer the load from the electricity power line to the emergency generators. In case of overload, it also functions as a circuit breaker. In this work, a new mechanism for the device is suggested. Among the various design challenges, optimization of the trigger mechanism is identified as of central importance. Optimal design decisions are made with the use of Taguchi method.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.434-440
• /
• 2003

The exchange of model design date among heterogeneous CAD systems is a difficult task because each system has different data structures suitable for its own functions. STEP has been able to represent product information as a common computer-interpretable form that is required to remain complete and consistent when the product informant is needed to be exchanged among different computer system. However, STEP has difficult architecture in is representing point, line, curve and vectors of element, more over it can't represent geometry data of feature based models. In this study, a structure of XML document that represents geometry data of feature based models as neutral format has been developed. To use the developed XML document, a Converter has also been developed to exchange modules so that it can exchange feature based data models among heterogeneous CAD systems. Aa for evaluation of the developed XML document and Converter, Solidworks and SolidEdge are selected.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.369-371
• /
• 2007

This study suggests a modeling of grid-connected wind turbine generation system that has induction generator, and aims to perform simulations for outputs by the variation of actual wind speed and for fault current of wind generation system by the transformer winding connection. This study is implemented by matlab&simulink. The simulation shall be performed by assuming single line to ground fault generated in the system. Generator power, generator rotor speed, generator terminal current and fault current shall be observed following the performance of simulation. The fault current change will be dealt through the simulation results for fault current of wind generation system following the grid-connected transformer winding connection and the simulation result by the transformer neutral ground method.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.2
• /
• pp.128-136
• /
• 2009

Curved glued laminated timber (glulam) is rapidly coming into the domestic modern timber frame buildings and predominant in building construction. The radial stress is frequently occurred in curved beams and is a critical design parameter in curved glulam. Three models, Wilson equation, Exact solution and Approximation equation were introduced to determine the radial stress of curved glulam under pure bending condition. It is obvious that radial stress distribution between small radius and large radius was different due to slight change of neutral plane location to center line. If the beam design with extremely small radius, it should be considered to determine the exact location of maximum radial stress. The current standard KSF 3021 was reviewed and would be considered some adjustment determining the optimum radius in curved glulam. Current design principle is that the stress factor is given by the curvature term only in constant depth of the beam, but like tapered or small radius of beams, the stress factor by Wilson equation was underestimated. So current design formula should be considered to improvement for characterizing the radial stress factor under pure bending condition.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.302-310
• /
• 2008

In order to evaluate the nominal rating of breakers in distribution system due to the increased capacity and operating conditions of power transformers in 154 kV substation, the fault currents in distribution system were calculated by the conventional method and simulations of PSCAD/EMTDC program. Consequently, under the condition of the parallel operation of transformers, the fault currents exceed the nominal current of the breakers in some areas. Without NGR at the secondary neutral of the transformer, the current of single line-to-ground fault was bigger than that of 3-phase fault. Therefore, the results clearly show that the measures to limit the fault currents in distribution system are needed when the increased capacity of power transformers is introduced into 154 kV substation.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1492-1494
• /
• 2015

분산전원 연계기준에 따라 변압기 1차 중성점을 접지운전시 Y-Y-3Limb, $Y-{\Delta}$결선방식은 비대칭 계통전압에 의해 순환전류가 발생된다. 이러한 순환전류는 상별 전류에 영향을 주어 보호계전기 오동작 및 전력량계 오차를 발생시킨다. 따라서 순환전류로 인한 전력계산의 문제를 해결하기 위해 신동파워이론을 만들었다. 본 이론의 핵심은 비대칭 3상 전압과 변압기 결선 및 구조에 의해 발생되는 영상 임피던스(R+jX) 해석을 통해 중성선의 순환전류를 계산하였다. 따라서 정확한 전력계산을 위해 순환전류에 의해 발생되는 상별전류를 보정하는 새로운 이론을 소개 하고자 한다.

• Steel and Composite Structures
• /
• v.34 no.6
• /
• pp.795-802
• /
• 2020

The subject of the paper is a circular plate with symmetrically thickness-wise varying mechanical properties. The plate is simply supported and carries a concentrated force located in its centre. The axisymmetric bending problem of the plate with consideration of the shear effect is analytically and numerically studied. A nonlinear function of deformation of the straight line normal to the plate neutral surface is assumed. Two differential equations of equilibrium based on the principle of stationary potential energy are obtained. The system of equations is analytically solved and the maximum deflections and shear coefficients for example plates are derived. Moreover, the maximum deflections of the plates are calculated numerically (FEM), for comparison with the analytical results.