• Coupled systems mechanics
• /
• 제13권3호
• /
• pp.201-217
• /
• 2024

This study aims to develop a new model to obtain the minimum area in circular isolated footings with eccentric column taking into account that the surface in contact with the ground works partially in compression, i.e., a part of the contact area of the footing is subject to compression and the other there is no pressure (pressure zero). The new model is formulated from a mathematical approach based on a minimum area, and it is developed by integration to obtain the axial load "P", moment around the X axis "M_x" and moment around the Y axis "M_y" in function of σ_max (available allowable soil pressure) R (radius of the circular footing), α (angle of inclination where the resultant moment appears), y₀ (distance from the center of the footing to the neutral axis measured on the axis where the resultant moment appears). The normal practice in structural engineering is to use the trial and error procedure to obtain the radius and area of the circular footing, and other engineers determine the radius and area of circular footing under biaxial bending supported on elastic soils, but considering a concentric column and the contact area with the ground works completely in compression. Three numerical problems are given to determine the lowest area for circular footings under biaxial bending. Example 1: Column concentric. Example 2: Column eccentric in the direction of the X axis to 1.50 m. Example 3: Column eccentric in the direction of the X axis to 1.50 m and in the direction of the Y axis to 1.50 m. The new model shows a great saving compared to the current model of 44.27% in Example 1, 50.90% in Example 2, 65.04% in Example 3. In this way, the new minimum area model for circular footings will be of great help to engineers when the column is located on the center or edge of the footing.

• Applied Biological Chemistry
• /
• 제17권4호
• /
• pp.247-256
• /
• 1974

한국산의 대두를 $21{\sim}25^{\circ}C$의 암소(暗所)에서 10일동안 발아(發芽)시키면서 2일 간격으로 두아(豆芽)를 채취하여 자엽부(子葉部)와 배축부(胚軸部)의 2부분으로 분리한 후 이 두 lipoxygenase activity와 triglyceride, free fatty acid, phospholipid 및 조지방(粗脂肪)의 구성지방산의 변화를 각각 비교한 결과 다음과 같은 결론을 얻었다. (1) 발아중 자엽부(子葉部)의 lipoxygenase activity는 2일 후부터 급속히 감소하였으나 배축부(胚軸部)에서는 2일 후부터 서서히 증가하였다. 이와같은 lipoxygenase activity의 변화는 자엽부(子葉部)에서 linoleic 및 linolenic acid의 감소경향과 배축부(胚軸部)에서 이들 지 방산의 증가경향과 동일하였다. (2) 발아중 자엽부(子葉部)에서 추출한 triglyceride fraction의 요오드값은 계속 감소 하였으나 배축부(胚軸部)에서는 큰 변화없이 일정하였으며 배축부(胚軸部)의 요오드값은 자엽부(子葉部)의 것보다 낮았다. (3) 발아중 자엽부(子葉部)의 triglyceride의 구성지방산중 palmitic acid의 함량은 큰 변화가 없었으며 stearic acid는 계속 증가하였고 oleic acid는 증감의 변화가 불규칙적이며 linoleic 및 linolenic acid는 계속 감소하였다. 그러나 배축부(胚軸部)에서는 palmitic acid의 함량은 큰 변화가 없었으며 linoleic 및 linolenie acid의 함량은 계속 약간씩 증가하였고 stearic 및 oleic acid는 불규칙적으로 함량의 변화가 심하였다. (4) 발아중 자엽부(子葉部) 및 배축부(胚軸部)에서 추출한 free fatty acid fraction의 모든 구성지방산은 불규칙하게 그 증감의 변화가 심하였다. 이와같은 현상은 lipase의 분해로 생성된 각종 지방산은 생합성(生合成)과정이나 에너지 발생과정에 무작위(無作爲)하게 이용되기 때문인 것으로 추측된다. (5) 발아증 기수(奇數)탄소수의 지방산은 전혀 발견되지 않았는바 이는 대두발아중 지방산은 $C_2$-unit로 분해 및 이용되기 때문인 것으로 추측된다. (6) 자엽부(子葉部) 및 배축부(胚軸部)에서 추출한 phospholipid 및 배축부(胚軸部)의 모든 구성지방산의 변화는 triglyceride fraction의 지방산의 변화경향과 비슷하었다.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.265-270
• /
• 2022

본 논문에서는 정지 좌표계 dq-축 전류를 기반으로 하는 비대칭 6상 PMSM의 스위치 개방 고장 검출 알고리즘을 제안한다. 본 논문에서의 해당 모터는 2개의 3상 권선이 30°의 전기적 위상차를 갖고 중성점이 분리된 비대칭 구조를 갖는다. 따라서 듀얼 3상 PWM 인버터와 스위치 개방 고장으로 인한 검출기법이 반드시 필요하다. 본 논문에서는 비대칭 6상 PMSM을 구동하기 위해 듀얼 dq축 전류 제어 방식을 사용하며 전역 통과 필터와 저역 통과 필터를 사용해 전류 변동을 감지하여 개방 고장이 발생한 스위치를 검출하는 방식을 제안한다. 제안한 방법의 효과와 유용성은 여러 실험을 통해 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.237-242
• /
• 2001

The stochiometric mix of evaporating materials for the CuGaSe$_2$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CuGaSe$_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were 610$^{\circ}C$ and 450$^{\circ}C$, respectively The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the CuGaSe$_2$ single crystal thin film, we have found that the values of spin orbit splitting Δ So and the crystal field splitting ΔCr were 91 meV and 249.8 meV at 20 K, respectively. From the Photoluminescence measurement on CuGaSe$_2$ single crystal thin film, we observed free excition (Ex) existing only high quality crystal and neutral bound exiciton (D$^{\circ}$,X) having very strong peak intensity. Then, the full-width-at-half-maximum(FWHM) and binding energy 7f neutral acceptor bound excision were 8 meV and 35.2 meV, respectivity. By Haynes rule, an activation energy of impurity was 355.2 meV

• 한국의류학회지
• /
• 제21권7호
• /
• pp.1196-1204
• /
• 1997

Cotton, rayon/cotton, and Tencel twill weave fabrics were used to investigate the effect of fiber types on the cellulase washing finish. And twill. basket, and derivative weave cotton fabrics were used to study the weave effect. Various fabrics were treated with neutral cellulase varying treatment times and with acid cellulase, stone, and stone-neutral cellulase respectively for two hours in a rotary washer. Weight loss decreased in the order of rayon/cotton> cotton> Tencel, and basket and derivative weave fabrics lost more weight than twill weave fabric. Color difference decreased in the order of cotton> Tencel> rayon/cotton, and twill weave fabric had larger color difference than derivative and basket weave fabrics. Back staining decreased in the order of cotton> rayon/cotton> Tencel, and twill weave fabric had larger back staining than derivative and basket weave fabrics. Tear strength retention decreased in the order of rayon/cotton> cotton> Tencet and twill weave fabric had larger tear strength retention than derivative and basket weave fabrics. Flex stiffness retention decreased in the order of cotton> Tencel> rayon/cotton, and in the order of derivative> twill> basket weave. In cotton fibers, damage of primary wall was observed. And the cellulase treatment on Tencel seemed to roughen the fabric surface slightly, and to fibril fibers along the fiber axis.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.95-104
• /
• 2022

Micro hydropower is a readily available renewable energy source that can be harvested utilizing hydrokinetic turbines from shallow water canals, irrigation and industrial channel flows, and run-off river stream flows. These sources generally have low head (<1 m) and low velocity which makes it difficult to harvest energy using conventional turbines. A horizontal-axis screw turbine was designed and numerically tested to extract power from such low-head water sources. The 3-bladed screw-type turbine is placed horizontally perpendicular to the incoming flow, partially submerged in a narrow water channel at no-head condition. The turbine hydraulic performances were studied using Computational Fluid Dynamics models. Turbine design parameters such as the shroud diameter, the hub-to-shroud ratios, and the submerged depths were obtained through a steady-state parametric study. The resulting turbine configuration was then tested by solving the unsteady multiphase free-surface equations mimicking an actual open channel flow scenario. The turbine performance in the shallow channel were studied for various Tip Speed Ratios (TSR). The highest power coefficient was obtained at a TSR of 0.3. The turbine was then scaled-up to test its performance on a real site condition at a head of 0.3 m. The highest power coefficient obtained was 0.18. Several losses were observed in the 3-bladed turbine design and to minimize losses, the number of blades were increased to five. The power coefficient improved by 236% for a 5-bladed screw turbine. The fluid losses were minimized by increasing the blade surface area submerged in water. The turbine performance was increased by 74.4% after dipping the turbine to a bottom wall clearance of 30 cm from 60 cm. The final output of the novel horizontal-axis screw turbine showed a 2.83 kW power output at a power coefficient of 0.63. The turbine is expected to produce 18,744 kWh/year of electricity. The design feasibility test of the turbine showed promising results to harvest energy from small hydropower sources.

• 천문학회보
• /
• 제41권2호
• /
• pp.33.2-34
• /
• 2016

The unification model of active galactic nuclei invokes the presence of a thick molecular torus that hides the broad emission line region from a line of sight toward observers with low latitude. It is expected that the illuminated side of the molecular torus may be photodissociated by strong far UV radiation from the central AGN, forming an H I region with a high neutral column density. We propose that the Rayleigh scattering optical depth of this HI region can be significant for most broad $Ly{\alpha}$ line photons with the Doppler factor not exceeding 104 km s-1. Rayleigh scattered $Ly{\alpha}$ photons can be characterized by strong linear polarization depending on their scattering optical depth. We performed Monte Carlo simulations of polarized radiative transfer of $Ly{\alpha}$ adopting simple scattering geometries relevant to the unification model of AGN. We find that for a low torus the Rayleigh scattered $Ly{\alpha}$ is polarized in the direction parallel to the symmetry axis with the polarization degree dependent on wavelength. In the case of a high torus, the core part of $Ly{\alpha}$ is polarized in the direction perpendicular to the symmetry axis whereas the wing part is parallelly polarized. We conclude that careful spectropolarimetry around $Ly{\alpha}$ can be useful in testing the AGN unification model.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1773-1780
• /
• 2016

This paper proposes a wide air-gap control method for the multi-module permanent magnet linear synchronous motor (MM-PMLSM) based on independent vector control. In particular, the MM-PMLSM consists of symmetrical multi-module and multi-phase structures, which are basically three-phase configurations without a neutral point, unlike conventional three-phase machines. In addition, there are no additional magnetic levitation windings to control the normal force of the air-gap between each stator and mover. Hence, in this paper, a dq-axis current control applying a d-q transformation and an independent vector control are proposed for the air-gap control between the two symmetric stators and mover of the MM-PMLSM. The characteristics and control performance of the MM-PMLSM are analyzed under the concept of vector control. As a result, the proposed method is easily implemented without additional windings to control the air-gap and the mover position. The effectiveness of the proposed independent vector control algorithm is verified through experimental results.

• Clinics in Shoulder and Elbow
• /
• 제17권1호
• /
• pp.25-30
• /
• 2014

Background: Normal elbow joint kinematics has been widely studied in cadaver, whilst in vivo study, especially of the forearm, is rare. Our study analyses, in vivo, the kinematics of normal forearm and of malunited forearm using a three-dimensional computerized simulation system. Methods: We examined 8 patients with malunited Monteggia fracture and 4 controls with normal elbow joint. The ulna and radius were reconstructed from CT data placing the forearm in three different positions; full pronation, neutral, and full supination using computer bone models. We analyzed the axis of rotation 3-dimentionally based on the axes during forearm rotation from full pronation to full supination. Results: Axis of rotation of normal forearm was pitch line, with a mean range of 2 mm, from full pronation to full supination, connecting the radial head center proximally and ulnar fovea distally. In normal forearm, the mean range was 1.32 mm at the proximal radioulnar joint and 1.51 mm at the distal radioulnar joint. However in Monteggia fracture patients, this range changed to 7.65 mm at proximal and 4.99 mm at distal radoulnar joint. Conclusions: During forearm rotation, the axis of rotation was constant in normal elbow joint but unstable in malunited Monteggia fracture patients as seen with radial head instability. Therefore, consideration should be given not only to correcting deformity but also to restoring AOR by 3D kinematics analysis before surgical treatment of such fractures.

• International Journal of Concrete Structures and Materials
• /
• 제18권1E호
• /
• pp.11-16
• /
• 2006

The use of the current ACI 318 stress block parameters has been reported to provide unconservative estimations of the moment capacities for high-strength concrete columns. Accordingly, several concrete stress block parameters have been recently proposed. This paper discusses various concrete stress block parameters for high-strength concrete and their influences on the code provisions. In order to adopt the proposed stress block parameters to the design code, it is necessary to understand the impact of the change of the stress block parameters on various aspects of the code provisions. For this purpose, the influence of using of different stress block parameters on the location of the neutral axis and the tensile strain in extreme tension steel as well as the axial and moment capacities are investigated. In addition, the influence on the prestressed concrete members is also elucididated.