• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.76-80
• /
• 1993

In this paper we discuss optimization of neural network parameters, such as inclination of the sigmoid function, the numbers of the input layer's units and the hidden layer's units, considering application to recognition of hand written Hangul. Hangul characters are composed of vowels and consonants, and basically classified to six patterns by their positions. Using these characteristics of Hangul, the pattern of a given character is determined by its peripheral distribution and the other features. After then, the vowels and the consonants are recognized by the optimized neural network. The constructed recognition system including a neural network is applied to non-learning Hangul written by some Korean people, which are the names randomly taken from Korean spiritual and cultural research institute.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.169-175
• /
• 2006

This paper describes how an Artificial Neural Network(ANN) can be employed to improve a speed estimation in a vector controlled induction motor drive. The system uses the ANN to estimate changes in the motor resistance, which enable the sensorless speed control method to work more accurately. Flux Observer is used for speed estimation in this system. Obviously the accuracy of the speed control of motor is dependent upon how well the parameters of the induction machine are known. These parameters vary with the operating conditions of the motor; both stator resistance(Rs) and rotor resistance(Rr) change with temperature, while the stator leakage inductance varies with load. This paper proposes a parameter compensation technique using artificial neural network for accurate speed estimation of induction motor and simulation results confirm the validity of the proposed scheme.

• Journal of Mechanical Science and Technology
• /
• v.18 no.8
• /
• pp.1327-1337
• /
• 2004

An efficient multi-objective optimization method is presented making use of neural network and a systematic satisficing trade-off method (STOM), in order to simultaneously improve both maneuverability and durability of tire. Objective functions are defined as follows: the sidewall-carcass tension distribution for the former performance while the belt-edge strain energy density for the latter. A back-propagation neural network model approximates the objective functions to reduce the total CPU time required for the sensitivity analysis using finite difference scheme. The satisficing trade-off process between the objective functions showing the remarkably conflicting trends each other is systematically carried out according to our aspiration-level adjustment procedure. The optimization procedure presented is illustrated through the optimum design simulation of a representative automobile tire. The assessment of its numerical merit as well as the optimization results is also presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.46-53
• /
• 1997

This paper presents a method of detection localized defects on tapered roller bearing in main spindle of machine tool system. The feature vectors, i.e. statistical parameters, in time-domain analysis technique have been calculated to extract useful features from acoustic emission signals. These feature vectors are used as the input feature of an neural network to classify and detect bearing defects. As a results, the detection of bearing defect conditions could be sucessfully performed by using an neural network with statistical parameters of acoustic emission signals.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.3-8
• /
• 2004

When most manufacturing company produce grinding product operators decide grinding condition by experience and subjective judgment. The study on grinding manufacture have been developed to get the grinding condition with the same result when non-experienced or experienced worker work. The objective of this study is to develope the grinding condition and predict the result of grinding by neural network. Several discussions were made in following areas as; getting MRR with image processing, the architecture optimization of neural network with experiment design, analysis of the input neurons using sensitivity approach. The results showed that the developed approach was the best method in predicting grinding condition with respect to surface finish quality.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.1
• /
• pp.64-72
• /
• 2016

The coverage area of a GNSS regional ionospheric delay model is mainly determined by the distribution of GNSS ground monitoring stations. Extrapolation of the ionospheric model data can extend the coverage area. An extrapolation algorithm, which combines observed ionospheric delay with the environmental parameters, is proposed. Neural network and least square regression algorithms are developed to utilize the combined input data. The bi-harmonic spline method is also tested for comparison. The IGS ionosphere map data is used to simulate the delays and to compute the extrapolation error statistics. The neural network method outperforms the other methods and demonstrates a high extrapolation accuracy. In order to determine the directional characteristics, the estimation error is classified into four direction components. The South extrapolation area yields the largest estimation error followed by North area, which yields the second-largest error.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.79-86
• /
• 2012

This paper proposes PID and RIC (Robust Internal-loop Compensator) based motion controller using dual learning algorithm for position control of linear synchronous motor respectively. Its gains are auto-tuned by using two learning algorithms, reinforcement learning and neural network. The feedback controller gains are tuned by reinforcement learning, and then the feedforward controller gains are tuned by neural network. Experiments prove the validity of dual learning algorithm. The RIC controller has better performance than does the PID-feedforward controller in reducing tracking error and disturbance rejection. Neural network shows its ability to decrease tracking error and to reject disturbance in the stop range of the target position and home.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.12
• /
• pp.48-55
• /
• 1997

A useful method to detect tool breakage suing neural network of cutting force signal is porposed and implemented in a basic cutting process. Cutting signal is gathered by tool dynamometer and normalized as a preprocessing. The cutting force signal level is continually monitored and compared with the predefined level. The neural network has been trained normalized sample data of the normal operation and cata-strophic tool failure using backpropagation learning process. The develop[ed system is verified to be very effective in real-time usage with minor modification in conventional cutting processes.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1083-1087
• /
• 2005

As development of digital technology, many kinds of multimedia data are used variously and requirements for effective use by user are increasing. In order to transfer information fast and precisely what user wants, effective retrieval method is required. As existing multimedia data are impossible to apply the MPEG-1, MPEG-2 and MPEG-4 technologies which are aimed at compression, store and transmission. So MPEG-7 is introduced as a new technology for effective management and retrieval of multimedia data. In this paper, we extract content-based features using color descriptor among the MPEG-7 standardization visual descriptor, and reduce feature data applying PCA(Principal Components Analysis) technique. We model the cerebral cortex and hippocampal neural network in engineering domain, and team content-based feature vectors fast and apply the hippocampal neural network algorithm to compose of optimized feature. And then we present fast and precise retrieval effect when indexing and retrieving.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.333-336
• /
• 1991

In this paper, Hopfield & Tank model-like artificial neural network structure is proposed, which can be used for the optimal path planning problems such as the unit commitment problems or the maintenance scheduling problems which have been solved by the dynamic programming method or the branch and bound method. To construct the structure of the neural network, an energy function is defined, of which the global minimum means the optimal path of the problem. To avoid falling into one of the local minima during the optimization process, the simulated annealing method is applied via making the slope of the sigmoid transfer functions steeper gradually while the process progresses. As a result, computer(IBM 386-AT 34MHz) simulations can finish the optimal unit commitment problem with 10 power units and 24 hour periods (1 hour factor) in 5 minites. Furthermore, if the full parallel neural network hardware is contructed, the optimization time will be reduced remarkably.