• Speech Sciences
• /
• v.11 no.4
• /
• pp.67-73
• /
• 2004

Packet loss, jitter, and delay in the Internet are caused mainly by the shortage of network bandwidth. It is due to queuing and routing process in the intermediate nodes of the packet network. In the Internet whose bandwidth is changing very rapidly in time depending on the number of users and data traffic, controlling the peak transmission bit-rate of a VoIP. system depending on the channel condition could be very helpful for making use of the available network bandwidth. Adapting packet size to the channel condition can reduce packet loss to improve the speech quality. It has been shown in [1] that a VoIP system with an AMR speech codec provides better speech quality than VoIP systems with fixed rate speech codecs. With the adaptive codec mode assignment. algorithm proposed in [1], in this paper, we performed the voice transmission experiments using the wireless LAN through the real Internet environment. Experimental results are analyzed and discussed with our findings.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.91-102
• /
• 1999

Fieldbus provides real-time data communication among field devices in the manufacturing automation and process control systems. In this study, an experimental model of fieldbus-based manufacturing automation system is developed. Experimental model consists of two robots, two conveyor belts, NC machine, PLC, sensors and operator station. These machines are interconnected into the Profibus network, and exchange their data through the services provided by FMS(Fieldbus Message Specification), which is the application layer protocol of Profibus. The experimental model is used to measure the network-induced delay of variable and file data transmitted through FMS services. Network-induced delays are collected and analyzed on each sublayer of Profibus protocol stack. The results obtained from the experiment of this study can be effectively utilized when fieldbus is implemented on the practical manufacturing automation systems.

• ETRI Journal
• /
• v.43 no.5
• /
• pp.881-890
• /
• 2021

Photoplethysmography (PPG) is a noninvasive technique that can be used to conveniently measure heart rate (HR) and thus obtain relevant health-related information. However, developing an automated PPG system is difficult, because its waveforms are susceptible to motion artifacts and between-patient variation, making its interpretation difficult. We use deep neural network (DNN) filters to mimic the cognitive ability of a human expert who can distinguish the features of PPG altered by noise from various sources. Systolic (S), onset (O), and first derivative peaks (W) are recognized by three different DNN filters. In addition, the boundaries of uninformative regions caused by artifacts are identified by two different filters. The algorithm reliably derives the HR and presents recognition scores for the S, O, and W peaks and artifacts with only a 0.7-s delay. In the evaluation using data from 11 patients obtained from PhysioNet, the algorithm yields 8643 (86.12%) reliable HR measurements from a total of 10 036 heartbeats, including some with uninformative data resulting from arrhythmias and artifacts.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8
• /
• pp.2543-2554
• /
• 2000

Packet schedulers for real-time communication must provide bounded delay and efficient use of network resources such as bandwidth, buffers and so on. In order to satisfy them, a large number of packet scheduling methods have been proposed. Among packet scheduling methods, an EDF (Earliest Deadline First) scheduling is the optimal one for a bounded delay service. A disadvantage of EDF scheduling is that queued packets must be sorted according to their deadlines, requiring a search operation whenever a new packet arrives at the scheduler. Although an RPQ (Rotating Priority Queue) scheduler, requiring large size of buffers, does not use such operation, it can closely approximate the schedulability of an EDF scheduler. To overcome the buffer size problem of an RPQ scheduler, this paper proposes a new scheduler named MRPQ (Multiple Rotating Priority Queue). In a MRPQ scheduler, there are several layers with a set of Queues. In a layer, Queues are configured by using a new strategy named block Queue. A MRPQ scheduler needs nearly half of buffer size required in an RPQ scheduler and produces schedulability as good as an RPQ scheduler.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8B
• /
• pp.507-513
• /
• 2005

As the rapid increasement of the number of internet users has occured recently, many multimedia application services have been emerging. To improve quality of service, traffic can be suggested to be classified with priority in EPON(Ethernet Passive Optical Network), which is supporting the multimedia application services. In this paper, multimedia application services treat bandwidth classifying device in serving both delay sensitive traffic for real-time audio, video and voice data such as Von(Voice over Internet Protocol), and for real-time traffic such as BE(Best Effort). With looking through existing mechanisms, new mechanism to improve the quality will be suggested. The delay performances and packet losses of traffic achieved by supporting bandwidth allocation of upstream traffic in suggested mechanism will be analized with simulations.

• Journal of KIISE
• /
• v.42 no.9
• /
• pp.1162-1174
• /
• 2015

These days, the networks have exhibited HBDP (High Bandwidth Delay Product) characteristics. The legacy TCP slowly increases the size of the congestion window and drastically decreases the size of a congestion window. The legacy TCP has been found to be unsuitable for HBDP networks. TCP mechanisms for solving the problems of the legacy TCP can be categorized into the loss-based TCP and the delay-based TCP. Most of the TCP mechanisms use the standard slow start phase, which leads to a heavy packet loss event caused by the overshoot. Also, in the case of congestion avoidance, the loss-based TCP has shown problems of wastage in terms of the bandwidth and RTT (Round Trip Time) fairness. The delay-based TCP has shown a slow increase in speed and low occupancy of the bandwidth. In this paper, we propose a new scheme for improving the over shoot, increasing the speed of the bandwidth and overcoming the bandwidth occupancy and RTT fairness issues. By monitoring the buffer condition in the bottleneck link, the proposed scheme does congestion control and solves problems of slow start and congestion avoidance. By evaluating performance, we prove that our proposed scheme offers better performance in HBDP networks compared to the previous TCP mechanisms.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.3
• /
• pp.231-238
• /
• 2021

In addition to individual calls and group calls, the Trunked Radio System (TRS), which belongs to a group, can make calls simultaneously, and many users can use it within a limited time by adjusting the call time. Also, the LCX infrastructure network of the subway Most of the FM, firefighting radio, TRS of the National Police Agency and the terrestrial DMB service built in 2005 are commonly connected to the network for service and operation. In connection with the analysis, call reception sensitivity, handoff, interference with other signals, time delay, etc. were analyzed, and tests such as reception field strength for each output of the repeater and the success rate of the call terminal were conducted and the test results were analyzed. In addition, it will help TRS cell design and network construction by predicting equipment output capacity and service coverage based on test results.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.209-218
• /
• 2005

In this paper, we present an Active Optical Network(AON) . The AON uses the Dense Wavelength Division Multiplexing(DWDM) from optical communication access network of ring type, and will be able to provide the smoothly service in the Bandwidth on Demand by using DWDM. It supports the connection of the multiple wavelength and the Sub-Carrier from the optical gigabit ethernet switch. The Wavelength Add Drop Multiplexer(WADM) extracts a specific wavelength, and composes a node of the ring network. The specific wavelength becomes demultiplexing in the Sub-Carrier and it is distributed in the user The active connection of optical gigabit ethernet switch where the distribution of access network is started and access terminal connection equipment is possible. By the BoD from the AON it compares the buffer size which changes, and it analyzes. Also the Time delay of bit compares with the throughput of server The limit of amount of time is decided. Consequently it will be able to realize the dynamic use protocol and an efficient algorithm of the network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3351-3369
• /
• 2017

In recent years, datacenters, network devices and computers have proliferated. The power consumed by information and communication technology (ICT) devices has inflated in an extraordinary manner. Green communication has emerged as a new approach to reduce and optimize power consumption in ICT sector. Many methods and protocols have been proposed and implemented to achieve green communication. Nevertheless, the increase of power consumption remains a problem. In this work, we attempt to reduce and optimize power consumption of network devices in datacenters environment utilizing software defined network (SDN) paradigm. To gain more insight of the power consumption requirements of network switches, a power measurement system is constructed to measure power consumption levels of network devices. Subsequently, we propose a duplication resolver algorithm (DRA) to power off/on switches reactively. DRA algorithm reduces the required time by switches to construct their flow tables after rebooting. To this end, DRA-based external circuit has been constructed utilizing Ethernet module and an Arduino kit to control power supplies of network devices. To facilitate our work, a testbed has been constructed utilizing Ryu SDN controller, HP2920-24G switches and Arduino kits. Our results show that DRA algorithm can reduce both the power usage and start-up time delay of network switches after failures.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1515_1516
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based micro-sensor was developed for simultaneous measurement of temperature and humidity. The developed sensor is composed of a SAW reflective delay lines structured by an IDT (Inter-Digital Transducer), four reflectors and humidity sensitive film (polyimide). Polyimide was dry-ecthed by RIE (Reactive Ion Etching) to obtain high roughness, which gives the large reaction area resulting in high sensitivity. In wireless testing using a network analyzer, sharp reflection peaks with high S/N ratio, small signal attenuation, and few spurious peaks were observed in the time domain. High sensitivity towards the temperature and humidiy were also observed in the large concentration range. The obtained sensitivity was $16.8^{\circ}/^{\circ}C$ for temperature sensor and $15.8^{\circ}$/%RH for humidity sensor.