• Journal of Multimedia Information System
• /
• v.1 no.2
• /
• pp.101-110
• /
• 2014

The purpose of this research is to extend Ad-hoc network system lifetime with the proposed routing protocol which has considered hop lifetimes of the nodes while guaranteeing QoS in the establishment process of Ad-hoc network communication paths. Based on another power aware routing system that proposed in the advanced research [1], we are proposing an alternative power aware routing system in which nodes' hop lifetimes are compared in order to extend the lifetime of an Ad-hoc network system and delay factors have been considered for the assurance of QoS. The research of the routing protocol in this paper, which aims to maximize the system survival time considering power consumption status during the path searching in MANET and pursues the mechanism that controls hop delays for the same reason, can be applied to the study of WSN. The study concerning such phenomena is essential so that the proposed protocol has been simulated and verified with NS-2 in Linux system focusing on the lifetimes of the hops of the nodes. Commercialization of smart devices and arrival of the ubiquitous age has brought about the world where all the people and things are connected with networks. Since the proposed power aware method and the hop delay control mechanism used to find the adequate communication paths in MANET which mainly uses batteries or in WSN, they can largely contribute to the lifetime extension of the network system by reducing power consumptions when utilized for the communications attempts among soldiers during military operation, disaster areas, temporary events or exhibitions, mobile phone shadow areas, home networks, in-between vehicle communications and sense networks, etc. This paper presents the definitions and some advantages regarding the proposed outing protocol that sustain and extend the lifetime of the networks.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1083-1092
• /
• 2016

In this paper, the performance of the optical code-division multiple access (OCDMA) technology on a plastic optical fiber (POF) access network, which had received much attention due to its low weight, large core diameter, flexibility, easy installation, and especially its high bandwidth, is analyzed. Recently, POF was a very attractive candidate for transmission media in an access network based on OCDMA technology. But the conventional OCDMA system only allows finite units to transmit and access simultaneously according to the number of channels which are restricted by BER, and so, in this paper, to resolve this problem a novel multi-priority reservation protocol is also proposed. By using this reservation scheme and a distributed arbitration algorithm, channel collision and destination conflict could be avoided. And this protocol can efficiently support the transmission of multimedia messages that require the different time-delay. The network throughput and average delay using various system parameters have been investigated by numerical analysis and simulation experiments. These results shows that the multi-priority reservation protocol in this POF access network based on OCDMA technology is valid and efficient.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.98-103
• /
• 2021

In this study, we propose a group communication technique that guarantees security and expandability by configuring a network consisting of IoT terminals equipped with security functions. As the number of devices participating in the network increases, network resources are proportionally reduced, and adding a security function to the IoT device increases the delay time due to encryption in the IoT device. If the error rate that occurs in the network increases, network resources are quickly consumed due to retransmission. Therefore, IoT terminals are grouped to ensure scalability while supporting security, reducing the consumption of network resources even when the number of participating nodes increases, thus ensuring scalability. For the future implementation, the encryption method used in IoT terminals considered the standard of IEEE802.5.4, and the standardization trend was investigated and classified. The proposed method applies IoT devices that provide security functions of the IEEE802.5.4 standard to the group communication base to ensure reliability and scalability. In the performance evaluation, the effectiveness of the proposed method was confirmed by comparing the delay times when grouping IoT devices with security functions through simulation.

• Journal of KIISE:Information Networking
• /
• v.35 no.2
• /
• pp.112-119
• /
• 2008

Today, A matter of concern of home network technology increase. The standard of communication between home network devices are required. IEEE 802.1 AVB(Audio/Video Bridging) specifies transmission method for time-sensitive data between these devices using Ethernet in bridged local area networks. IEEE 802.1 AVB and IEEE 1588 PTP(Precision Time Protocol) have various message type for grandmaster selection and synchronize the devices. These messages bring on complexity protocol. We propose a method that uses Single TimeSync frame in order to the problem. Our proposal is appropriate process complexity and low transmission delay for home network by using the TimeSync frame. Furthermore, after all devices are adjusted to the single TimeSync frame, a resource reservation, a forwarding and queueing rule are needed for a time-sensitive application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1037-1050
• /
• 2000

A goal of a BISDN network is to provided integrated transport for a wide range of applications such as teleconferencing, Video On Demand etc. There require multipoint communications in addition to conventional point-to-point connections. Therefore multicast capabilities are very essential in multimedia communications. In this paper, we propose a new multicast cell scheduling method on the Parallel Multicast Packet Switch with Ring network: PMRN which are based on separated HOL. In this method, we place two different HOLs, one for unicast cells and the other for multicast cells. Then using non-FIFO scheduling, we can schedule both unicast cells and multicast cells which are available at the time in the input buffer. The simulation result shows that this method reduces the delay in the input buffer and increases the efficiency of both point-to-point network and ring network and finally enhances the bandwidth of the overall packet switch. A goal of a BISDN network is to provided integrated transport for a wide range of applications such as teleconferencing, Video On Demand etc. There require multipoint communications in addition to conventional point-to-point connections. Therefore multicast capabilities are very essential in multimedia communications. In this paper, we propose a new multicast cell scheduling method on the Parallel Multicast Packet Switch with Ring network: PMRN which are based on separated HOL. In this method, we place two different HOLs, one for unicast cells and the other for multicast cells. Then using non-FIFO scheduling, we can schedule both unicast cells and multicast cells which are available at the time in the input buffer. The simulation result shows that this method reduces the delay in the input buffer and increases the efficiency of both point-to-point network and ring network and finally enhances the bandwidth of the overall packet switch.

• Journal of KIISE
• /
• v.41 no.10
• /
• pp.824-831
• /
• 2014

HTTP (Hypertext Transfer Protocol) Adaptive Streaming is gaining attention because it changes bitrates to adapt changing network conditions. Since HAS (HTTP Adaptive Streaming) client downloads the video data based on TCP (Transmission Control Protocol), it estimates incorrectly the available bandwidth and leads to an unnecessary video quality change in long-delay networks. In this paper, we propose a buffer-based quality control scheme in order to improve the service quality and smooth playback in the HAS. The proposed scheme estimates accurately the available bandwidth based on a modified streaming model that considers network delay. It also calculates the sustainability of the video quality to prevent an unnecessary quality change and determines the inter-request time on the basis of the buffer status. Through the simulation, we prove that our scheme improves the QoS (Quality of Service) of the HAS service and controls the video quality smoothly in long-delay networks.

• Journal of KIISE
• /
• v.42 no.3
• /
• pp.399-407
• /
• 2015

Wireless sensor networks are used for data collection and processing from the surrounding environment for various applications. Since wireless sensor nodes operate on low computing power, restrictive battery capacity, and low network bandwidth, their architecture model has greatly affected the performance of applications. If applications have high computation complexity or require the real-time processing, the centralized architecture in wireless sensor networks have a delay in data processing. Otherwise, if applications only performed simple data collection for long period, the distributed architecture wasted battery energy in wireless sensors. In this paper, the energy consumption and processing delay were analyzed in centralized and distributed sensor networks. In addition, we proposed a new hybrid architecture for wireless sensor networks. According to the characteristic of applications, the proposed method had the optimal number of wireless sensors in wireless sensor networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.397-406
• /
• 2009

A Wireless Access for Vehicular Environment (WAVE) system based on Orthogonal frequency Division Multiplexing (OFDM) is made for vehicle to vehicle wireless communications. The physical layer standard of the WAVE system is very similar to that of the IEEE802.1la wireless local area network (WLAN). Therefore, the performance of the WAVE system is degraded by continual timing delay in the WAVE multipath fading channels after starting initial timing synchronization. In this paper, the tracking algorithm that synchronizes symbol timing is proposed to continually compensate additional timing delay. Computer simulation of the proposed algorithm is performed in the worst communication environments that apply to maximum timing delay. Computer simulation shows that the proposed algorithm can improve the system performance in various channel conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.113-115
• /
• 2015

In this paper, we proposed an algorithm based on movement prediction using rate of change of the attribute information of nodes what is called WRC(Weighted Rate Control) in delay tolerant networks(DTNs). Existing DTN routing algorithms based on movement prediction communicate by selecting relay nodes increasing connectivity with destination node. Thus, because the mobile nodes are in flux, the prediction algorithms that do not reflect the newest attribute information of node decrease reliability. In this paper, proposed algorithm approximate speed and direction of attribute information of node and analysis rate of change of attribute information of node. Then, it predict movement path of node using proposed weight. As the result, proposed algorithm show that network overhead and transmission delay time decreased by predicting movement path of node.

• Journal of KIISE
• /
• v.43 no.8
• /
• pp.919-926
• /
• 2016

In a wireless network, TCP causes the performance degradation because of mistaking packet loss, which is caused by characteristics of wireless link and throughput oscillation due to change of devices connected on a limited bandwidth. Delay based TCP is not affected by packet loss because it controls window size by using the RTT. Therefore, it can solve the problem of unnecessary degradation of the rate caused by misunderstanding reason of packet loss. In this paper, we propose an algorithm for improving the remaining problems by using delay based TCP. The proposed scheme can change throughput adaptively by adding the RTT, which rapidly reflects the network conditions to BaseRTT. It changes the weight of RTT and the increases and decreases window size based on the remaining amount of the buffer. The simulation indicated that proposed scheme can alleviate the throughput oscillation problem, as compared to the legacy TCP Vegas.