• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2531-2533
• /
• 2002

In this paper, we evaluate feasibility of an object-oriented method in a distributed real-time control environment through the prediction of delay expected. We adopt CAN as the distributed network and the application layer of the CAN is composed of client/server communication model of COM and surroundings for the support of real-time capability of the COM. Mathematical models formalizing delays which are predicted to invoke in the COM architecture are proposed. Sensors and actuators which are widely used in distributed network-based systems are represented by COM objects in this paper. It is expected that the mathematical models can be used to protect distributed network-based systems from violation of real-time features by the COM.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.195-195
• /
• 1999

This paper is Proposed a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nickels method. So we can find the parameters of PID controller so as to minimize the fuzzy criterion function which includes the maximum overshoot, damping ratio, rising time and settling time. Finally, after studying the parameters of PID controller by Backpropagation of Neural-Network, when we give new K, L, T values to Neural-Network, the optimized parameter of PID controller is found by Neural-Network Program.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.8
• /
• pp.23-28
• /
• 2015

TPSN(Timing-sync Protocol for Sensor Networks), the representative of time synchronization protocol for WSN(wireless sensor networks), was developed to provide higher synchronization accuracy and energy efficiency. So, TPSN's approach has been referenced by so many other WSN synchronization schemes till now. However, TPSN has a collision problem due to simultaneous transmission among competing nodes, which causes more network convergence delay for a network-wide synchronization. A Polling-based scheme for TPSN is proposed in this paper. The proposed scheme not only shortens network-wide synchronization time of TPSN, but also reduce collision traffic which lead to needless power consumption. The proposed scheme's performance has been evaluated and compared with an original scheme by simulation. The results are shown to be better than the original algorithm used in TPSN.

• The KIPS Transactions:PartC
• /
• v.15C no.5
• /
• pp.419-428
• /
• 2008

IEEE 802.15.4 reserves transmission time to support real-time transport by sending GTS request packets to the PAN coordinator in advance. This paper introduces GTS-FAT technique to reduce the reservation time by giving a higher sending priority to GTS request packets than data packets. Differently from the conventional scheme where these two kinds of packets share a single transmission queue, GTS-FAT scheme allocates two queues with two different contention window sizes like IEEE 802.11e. This paper also proposes an analytical GTS delay model by combining the two legacy models for 802.15.4 and 802.11e to accurately predict the GTS-FAT delay over a given network topology. Our analysis shows that GTS-FAT reduces GTS service delay by up to 50% at the expense of the data delay by only up to 6.1% when GTS request packets four times outnumber data packets.

• Journal of Convergence Society for SMB
• /
• v.2 no.1
• /
• pp.25-31
• /
• 2012

Recently Wireless Communication technologies are widely used in Small And Medium Business fields. Wireless mesh networks have been studied as the next generation technology to solve problem of conventional wireless networks. Wireless mesh network uses a 802.11 when make up of network. mesh clients occurs Hard handover moving between ones. This increases the handover latency of the network mobility is a very great issues. Consequently, this paper propose a channel information previously methods to reduce the handover latency selective channels. Proposed scheme accounts for more than 90% of the probe delay to minimize the client had to move the mesh based on the old channel to retrieve information. Through simulation, the proposed scheme had shorter handover delay time than transitional full scan and selective scan. Through results of evaluation, the suggest PCISS scheme more fast 6.5% than transitional scheme.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.149-152
• /
• 2000

In the Internet, multimedia data transfer is hard to guarantee the characteristics of the Real-Time because of the Best-Effort of the nature of IP, then additional mechanism is applied to multimedia application for real-time data. In this paper, we introduce the nature of multimedia and the necessary facility for real-time protocol. We propose protocol layer, which has necessary function above mentioned and offer the end-to-end transfer far real-time data. Also, the proposed protocol perform a next low operation: 1) a required information for QoS control by using Feedback mechanism is obtained from sender, 2) divided a transferred packet by delay and loss priority. 3) recognized the low service models, and 4) decided a bandwidth and QoS according to a network state

• The Journal of the Korea Contents Association
• /
• v.8 no.12
• /
• pp.28-36
• /
• 2008

In this paper, a service mobility scheme using user's location & service information table management and user recognition skill is proposed to support the movement of the multimedia service user and provide the seamless multimedia service environment in home network. We analyzed the proposed scheme using queueing system and we built test bed for experiment onthe proposed scheme to verify the operation and performance. As a result, we can show the proposed scheme provides a seamless multimedia service through the new client terminal when a user move to the new location and shows the performance completing the service mobility through the new client terminal within the service delay time which is shorter than the service delay time generated in the previous scheme.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4E
• /
• pp.112-119
• /
• 2004

This paper presents a method for the automatic recognition of pitch accents with no prior knowledge about the phonetic content of the signal (no knowledge of word or phoneme boundaries or of phoneme labels). The recognition algorithm used in this paper is a time-delay recurrent neural network (TDRNN). A TDRNN is a neural network classier with two different representations of dynamic context: delayed input nodes allow the representation of an explicit trajectory F0(t), while recurrent nodes provide long-term context information that can be used to normalize the input F0 trajectory. Performance of the TDRNN is compared to the performance of a MLP (multi-layer perceptron) and an HMM (Hidden Markov Model) on the same task. The TDRNN shows the correct recognition of $91.9{\%}\;of\;pitch\;events\;and\;91.0{\%}$ of pitch non-events, for an average accuracy of $91.5{\%}$ over both pitch events and non-events. The MLP with contextual input exhibits $85.8{\%},\;85.5{\%},\;and\;85.6{\%}$ recognition accuracy respectively, while the HMM shows the correct recognition of $36.8{\%}\;of\;pitch\;events\;and\;87.3{\%}$ of pitch non-events, for an average accuracy of $62.2{\%}$ over both pitch events and non-events. These results suggest that the TDRNN architecture is useful for the automatic recognition of pitch accents.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.4
• /
• pp.237-244
• /
• 2007

In this paper we investigate the benefits of a data aggregation to prolong the lifetime of wireless sensor networks. To reduce the overload of messages from source node to sink node, data aggregation technique is generally used at intermediate node in path. The DD-G(Directed Diffusion-Greedy) can diminish the consumption of node energy by establishing energy effective single path from source to destination. In this case, the nodes near sink node have some problems, i) overly concentration of energy consumption, ii) increase of message delay time. To solve these problems, we propose a new data aggregation method which consider distribution of network overload, especially at the nodes close to sink node. The result shows that it can save energy and network delay time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1508-1517
• /
• 1993

In this paper, we propose the modeling of a wireless communication system using CSMA protocol, present analytical evalution and simulation as a function of arrival rate and mean END-to-END delay in the distributed packet radio network. Asynchronous 1-persistent CSMA protocol is used in wireless communication system with half duplex. We assume that all terminals are to be in the close range of each other, suitably located in the local area. The traffic presented to a common channel is assumed to be poisson distribution. Analytical model is based on a M/D/1 with breakdown. In conclusion for wireless network model proposed in this paper is suitable for packet arrival rate of 2 packet/sec with mean packet delay time less than 2 times the packet transmission time.