• 제목/요약/키워드: network time-delay

Search Result 1,471, Processing Time 0.043 seconds

Network scheduling algorithm for field bus system (필드 버스 시스템을 위한 네트웍 스케쥴링 알고리즘)

  • 추성호;김일환
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1996.10b
    • /
    • pp.1348-1351
    • /
    • 1996
  • In field bus network, field device are connected with a medium. Because a medium must be shared for transmitting data, there are random delay time when data arrive destination station. It is difficult that all data packets are guaranteed synchronization and real-time restriction. In this paper, we show an algorithm that makes network utilization to maximum, guarantees real-time restriction, calculates sampling time at all control loop.

  • PDF

Design of Jitter elimination controller for concealing interarrival packet delay variation in VoIP Network (VoIP 네트웍에서 패킷 전송지연시간 변이현상을 없애주는 적응식 변이 제어기 제안 및 성능분석)

  • 정윤찬;조한민
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.12C
    • /
    • pp.199-207
    • /
    • 2001
  • We propose an adaptive shaping controller equipped with the technologies of shaping and buffering VoIP packets arriving at the receiving end by the CAM-type controller. In order to conceal interarrival packet delay variation, the conventional jitter buffers force them to be too large, thereby causing the audio quality to suffer excessive delay. However, by using our proposed method, the delay caused by shaping operation dynamically increases or decreases on the level of jitter that exists with in the IP network. This makes the delay accommodates adaptively the network jitter condition. The less jitter network has the fewer delay the shaping controller requires for jitter elimination. And the CAM-type method generally makes the shaping operation faster and leads to processing packets in as little time as can. We analyse the packet loss and delay performance dependency on the average talk ratio and the number of jitter buffer entries in shaping controller. Surprising, we show that the average delay using our shaping controller is about 70msec. This performance is much better than with the delay equalization method which forces the receiving end to delay about 60msec.

  • PDF

Performance Analysis of a Dynamic Bandwidth Allocation Scheme for improving the delay of the real time traffic in an EPON (EPON에서 실시간 트래픽의 지연성능 향상을 위한 동적 대역할당방안의 성능분석)

  • Park, Chul-Geun;Lee, Yu-Tae;Chung, Hae;You, Geon-Il;Kim, Jong-An
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.11B
    • /
    • pp.1023-1030
    • /
    • 2003
  • In this paper, we deal with an effective dynamic bandwidth allocation(DBA) scheme in order to support the qualify of services (QoS) in the customer access network which supports various applications with own service requirements. we discuss the DBA scheme for upstream traffic in the EPON which support both the delay sensitive traffic such as voice and real-time video and non-real time traffic such as data and BE. We propose the new DBA scheme which guarantee the delay performance of the real time traffic and utilize the upstream bandwidth effectively in the limited resource environment. We analize the delay performance of the proposed scheme by simulation.

An MAC Protocol Design in Minimizing of Data Transmission Delay for Wireless Sensor Networks (센서 네트워크에서 데이타 전송 지연을 최소화하는 MAC 프로토콜의 설계)

  • Kim, Man-Seok;Kim, Sang-Soo;Koh, Kwang-Shin;Cho, Gi-Hwan;Lee, Moon-Ho
    • Journal of Internet Computing and Services
    • /
    • v.8 no.2
    • /
    • pp.43-54
    • /
    • 2007
  • The effective power consumption is the primary issue in a sensor network which consists of the sensor nodes with limited battery power. So, most of the MAC protocols in sensor networks have been designed with the consideration of energy efficiency. Generally, these protocols make use of the listen and sleep mode periodically. However, this approach inevitably causes a long transmission delay on the data forwarding path, which is mainly resulted from the sleep time of the receiver node. This paper deals with a design of DT-MAC(Data Transmission centric MAC) protocol, with minimizes the data transmission delay while it forces each node to consume its energy efficiently. Thus, a node received a packet converts its remained sleep time to the pseudo_listen time, in which the node is able to transmit a packet. With benefit of the pseudo_listen period, the data transmission delay along with the data forwarding path will be shortened as much as it possible. Therefore, DT-MAC protocol is very suitable to the various applications which require a real time sensing data such as disaster and fire alarm.

  • PDF

Teleoperatoin System Control using a Robust State Estimation in Networked Environment (네트웍 환경에서의 강건상태추정을 이용한 원격조작시스템 제어)

  • Jin, Tae-Seok;Kim, Hyun-Sik
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.18 no.6
    • /
    • pp.746-753
    • /
    • 2008
  • In this paper, we introduce the improved control method are communicated between a master and a slave robot in the teleoperation systems. When the master and slave robots are located in different places, time delay is unavoidable under the network environment and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The time delay may cause instability in teleoperation systems especially if those systems include haptic feedback. This paper presents a control scheme based on the estimator with virtual master model in teleoperation systems over the network. As the behavior of virtual model is tracking the one of master model, the operator can control real master robot by manipulating the virtual robot. And LQG/LTR scheme was adopted for the compensation of un-modeled dynamics. The approach is based on virtual master model, which has been implemented on a robot over the network. Its performance is verified by the computer simulation and the experiment.

Time-Delay Estimation in the Multi-Path Channel based on Maximum Likelihood Criterion

  • Xie, Shengdong;Hu, Aiqun;Huang, Yi
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.6 no.4
    • /
    • pp.1063-1075
    • /
    • 2012
  • To locate an object accurately in the wireless sensor networks, the distance measure based on time-delay plays an important role. In this paper, we propose a maximum likelihood (ML) time-delay estimation algorithm in multi-path wireless propagation channel. We get the joint probability density function after sampling the frequency domain response of the multi-path channel, which could be obtained by the vector network analyzer. Based on the ML criterion, the time-delay values of different paths are estimated. Considering the ML function is non-linear with respect to the multi-path time-delays, we first obtain the coarse values of different paths using the subspace fitting algorithm, then take them as an initial point, and finally get the ML time-delay estimation values with the pattern searching optimization method. The simulation results show that although the ML estimation variance could not reach the Cramer-Rao lower bounds (CRLB), its performance is superior to that of subspace fitting algorithm, and could be seen as a fine algorithm.

Adaptive Input Traffic Prediction Scheme for Absolute and Proportional Delay Differentiated Services in Broadband Convergence Network

  • Paik, Jung-Hoon;Ryoo, Jeong-Dong;Joo, Bheom-Soon
    • ETRI Journal
    • /
    • v.30 no.2
    • /
    • pp.227-237
    • /
    • 2008
  • In this paper, an algorithm that provides absolute and proportional differentiation of packet delays is proposed with the objective of enhancing quality of service in future packet networks. It features an adaptive scheme that adjusts the target delay for every time slot to compensate the deviation from the target delay, which is caused by prediction error on the traffic to arrive at the next time slot. It predicts the traffic to arrive at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot. The difference between them is utilized by the delay control operation for the next time slot to offset it. Because the proposed algorithm compensates the prediction error continuously, it shows superior adaptability to bursty traffic and exponential traffic. Through simulations we demonstrate that the algorithm meets the quantitative delay bounds and is robust to traffic fluctuation in comparison with the conventional non-adaptive mechanism. The algorithm is implemented with VHDL on a Xilinx Spartan XC3S1500 FPGA, and the performance is verified under the test board based on the XPC860P CPU.

  • PDF

Experimental Performance Evaluation of Token-Passing Mechanism in Foundation Fieldbus (Foundation Fieldbus에서 토큰-패싱 전송 방식의 실험적 성능 평가)

  • Bae, Jin-Woon;Hong, Seung-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2006.10c
    • /
    • pp.111-113
    • /
    • 2006
  • FOUNDATION fieldbus provides scheduling and token-passing services for cyclic and sporadic data respectively. In this paper, we evaluate the delay performance of token-passing mechanism in FOUNDATION fieldbus network system using an experimental model. This paper introduces a method of developing an experimental model which consists of 10 nodes of FOUNDATION fieldbus communication device. Using the experimental model, we evaluate the delay performance of time-critical and time-available data with respect to change of TTRT parameter.

  • PDF

Multi-Hop Clock Synchronization Based on Robust Reference Node Selection for Ship Ad-Hoc Network

  • Su, Xin;Hui, Bing;Chang, KyungHi
    • Journal of Communications and Networks
    • /
    • v.18 no.1
    • /
    • pp.65-74
    • /
    • 2016
  • Ship ad-hoc network (SANET) extends the coverage of the maritime communication among ships with the reduced cost. To fulfill the growing demands of real-time services, the SANET requires an efficient clock time synchronization algorithm which has not been carefully investigated under the ad-hoc maritime environment. This is mainly because the conventional algorithms only suggest to decrease the beacon collision probability that diminishes the clock drift among the units. However, the SANET is a very large-scale network in terms of geographic scope, e.g., with 100 km coverage. The key factor to affect the synchronization performance is the signal propagation delay, which has not being carefully considered in the existing algorithms. Therefore, it requires a robust multi-hop synchronization algorithm to support the communication among hundreds of the ships under the maritime environment. The proposed algorithm has to face and overcome several challenges, i.e., physical clock, e.g., coordinated universal time (UTC)/global positioning system (GPS) unavailable due to the atrocious weather, network link stability, and large propagation delay in the SANET. In this paper, we propose a logical clock synchronization algorithm with multi-hop function for the SANET, namely multi-hop clock synchronization for SANET (MCSS). It works in an ad-hoc manner in case of no UTC/GPS being available, and the multi-hop function makes sure the link stability of the network. For the proposed MCSS, the synchronization time reference nodes (STRNs) are efficiently selected by considering the propagation delay, and the beacon collision can be decreased by the combination of adaptive timing synchronization procedure (ATSP) with the proposed STRN selection procedure. Based on the simulation results, we finalize the multi-hop frame structure of the SANET by considering the clock synchronization, where the physical layer parameters are contrived to meet the requirements of target applications.

A Study on Real-Time Multimedia Service Considering Network Performance in ATM Networks (ATM망에서 Network Performance를 고려한 Real-Time Multimedia Service에 관한 연구)

  • 김영준;이병호
    • Proceedings of the IEEK Conference
    • /
    • 1998.10a
    • /
    • pp.91-94
    • /
    • 1998
  • ATM technology is reaching a certain level of maturity that allow for its deployment in local as well as in wide area networks. Concurrently, audiovisual applications are foreseen as one of the major users of such broadband networks. We present in this paper requriement of real-time multimedia service on B-ISDN networks and simulating the transport of MPEG-2 encoded multimedia data over ATM networks using CBR, VBR, ABR of ATM Traffic Service. We compare each delay time considering network performance and propose need for real-time multimedia service.

  • PDF