• IE interfaces
• /
• v.22 no.1
• /
• pp.95-103
• /
• 2009

During the past few years, design of experiments (DOE) has been gaining acceptance in the telecommunications research community as a mean for designing and analyzing experiments economically and efficiently. In addition, the need for introducing a systematic robust design methodology (i.e., one of the most popular DOE methodologies) to network simulations has been increasing. In this paper, we present an architecture of voice over IP (VoIP) application and the E-Model for calculating the perceived quality of service (QoS). Then, we apply the Taguchi robust design methodology to optimize the perceived QoS of VoIP application, and describe the detailed step-by-step procedures. We have used ns-2 simulator to collect experimental data in which the SN ratio, a robustness measure, is analyzed to determine an optimal design condition. The analysis shows that "initial delay time in playout buffer" is a major control factor for ensuring robust behaviors of the perceived QoS of VoIP. Finally, we verify the proposed optimal design condition using a confirmation experiment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.59-66
• /
• 2003

We propose the novel optical burst switching scheme to guarantee a minimum bandwidth for multiple classes. To date, QoS studies on OBS network are capable of differentiating two classes, but have difficulties in providing a minimum bandwidth lot several classes because of lower classes' collision with the highest class bursts in the networks. To solve that problem, in our proposed scheme we assign time zones in a data channel for each class periodically, making one burst have top priority at least its zone. Also, the new burst assembling algorithm, as well as the way of managing data channel, is necessarily proposed to coordinate with the proposed OBS scheme. Through the evaluation, we show that the worst-case end-to-end delay is small enough and the received bandwidth of the lower classes is still assured regardless of the traffic load of the highest class.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.2
• /
• pp.1-9
• /
• 1998

ATM was adopted as the switching and multiplexing technique for BISDN which aims at transmitting traffics with various characteristics in a unified network. To construct these ATM networks, the most important aspect is the design of the switching system with high performance and different service capabilities. In this paepr, we analyze the performance of an input and output queueing switch with preemptive priority which is considered to be most suitable for ATM networks. For the analysis of an input queue, we model each input queue as two separate virtual input queues for each priority class and we approximage them asindependent Geom/Geom/1 queues. And we model a virtual HOL queue which consists of HOL cells of all virtual input queues which have the same output address to obtain the mean service time at each virtual input queue. For the analysis of an output quque, we obtain approximately the arrival process into the output queue from the state of the virtual HOL queue. We use a Markov chain method to analyze these two models and obtain the maximum throughput of the switch and the mean queueing delay of cells. and analysis results are compared with simulation to verify that out model yields accurate results.

• Journal of Internet Computing and Services
• /
• v.13 no.1
• /
• pp.15-25
• /
• 2012

Mobile IPv6 (MIPv6) is a host-based protocol supporting global mobility while Proxy Mobile IPv6 (PMIPv6) is a network-based protocol supporting localized mobility. This paper makes its focus on how to reduce the longer delay and extra cost arising from the combination of authentication, authorization and accounting (AAA) and PMIPv6 further. Firstly, a novel authentication scheme (Proxy-AAA) is proposed, which supports fast handover mode and forwarding mode between different local mobility anchors (LMAs). Secondly, a cost analysis model is established based on Proxy-AAA. From the theoretical analysis, it could be noted that the cost is affected by average arrival rate and residence time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.5
• /
• pp.423-430
• /
• 2017

Recently, data analysis research has been carried out using the deep learning technique in various fields such as image interpretation and/or classification. Various types of algorithms are being developed for many applications. In this paper, we propose a precipitation prediction algorithm based on deep learning with high accuracy in order to take care of the possible severe damage caused by climate change. Since the geographical and seasonal characteristics of Korea are clearly distinct, the meteorological factors have repetitive patterns in a time series. Since the LSTM (Long Short-Term Memory) is a powerful algorithm for consecutive data, it was used to predict precipitation in this study. For the numerical test, we calculated the PWV (Precipitable Water Vapor) based on the tropospheric delay of the GNSS (Global Navigation Satellite System) signals, and then applied the deep learning technique to the precipitation prediction. The GNSS data was processed by scientific software with the troposphere model of Saastamoinen and the Niell mapping function. The RMSE (Root Mean Squared Error) of the precipitation prediction based on LSTM performs better than that of ANN (Artificial Neural Network). By adding GNSS-based PWV as a feature, the over-fitting that is a latent problem of deep learning was prevented considerably as discussed in this study.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.41-50
• /
• 2001

With growth of Internet, real time multimedia application services require guarantee of QoS (Quality of Service). However, the existing Internet based on best-effort service is not enough to support those services, so MARS model to support IP multicast over ATM networks and RSVP to provide heterogeneous QoS by resource reservation scheme are proposed. As a simulation result, it is proved that processing delay of MARS is increased and success of resource reservation is decreased as a number of QoS change request of a receiver is increased. Therefore, it is important to provide heterogeneous QoS that distribute a load of MARS caused by convergence of messages and efficiently manage the resource of network as to find out scale of receivers and frequency of QoS change request.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.8
• /
• pp.732-744
• /
• 1991

In this paper, performance evaluation of the common channel signalling module which performs the message transfer part function of the CCITT No.7 in TDX 1 exchange is carried out. Simulation model is developed using SLAM II network nodes according to signalling mode and transrated into SLAM II statement, . The simulation results are compared with experimental results and analyzed in order to get the maximum throughput, processing delay time, bottleneck eiement. Also, in order to get the optimized structure of the CSM, simulation is performed on the vanous case, namely, change of the number of STB, change of STG bus or B bus speed, change of CSIOB, processing speed, change of the number of transfered message per one poll.

• Journal of Korea Multimedia Society
• /
• v.13 no.6
• /
• pp.849-864
• /
• 2010

This paper proposes a multipath routing protocol called cross-layer multipath AODV (CM-AODV) for wireless ad hoc networks, which selects multiple routes on demand based on the signal-to-interference plus noise ratio (SINR) measured at the physical layer. Note that AODV (Ad hoc On-demand Distance Vector) is one of the most popular routing protocols for mobile ad hoc networks. Each time a route request (RREQ) message is forwarded hop by hop, each forwarding node updates the route quality which is defined as the minimum SINR of serialized links in a route and is contained in the RREQ header. While achieving robust packet delivery, the proposed CM-AODV is amenable to immediate implementation using existing technology by neither defining additional packet types nor increasing packet length. Compared to the conventional multipath version of AODV (which is called AOMDV), CM-AODV assigns the construction of multiple paths to the destination node and makes it algorithmically simple, resulting in the improved performance of packet delivery and the less overhead incurred at intermediate nodes. Our performance study shows that CM-AODV significantly outperforms AOMDV in terms of packet delivery ratio and average end-to-end delay, and results in less routing overhead.

• Journal of Korea Multimedia Society
• /
• v.19 no.11
• /
• pp.1829-1836
• /
• 2016

Today, the application area and scope of FANET(Flying Ad Hoc Network) has been extended. As a result, FANET related research are actively conducted, but there is no decision yet as the routing protocol for FANET. In this paper, we propose the OLSR-Pds (Prediction with direction and speed) which is added a method to predict status of link for OLSR protocol. The mobility of nodes are modeled using Gauss-Markov algorithm, and relative speed between nodes were calculated by derive equation of movement, and thereby we can predict link status. An experiment for comparing AODV, OLSR and, OLSR-Pds was conducted by three factors such as packet delivery ratio, end to end delay, and routing overhead. In experiment result, we were confirm that OLSR-Pds performance are superior in these three factors. OLSR-Pds has the disadvantage that requires time-consuming calculations for link state and required for computing resources, but we were confirm that OLSR-Pds is suitable for routing to the FANET environment because it has all the characteristics of proactive protocol and reactive protocol.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.1
• /
• pp.78-83
• /
• 2011

Traditional autopilot design requires an accurate aerodynamic model and relies on a gain schedule to account for system nonlinearities. This paper presents the control architecture applied to a dynamic model inversion at a single flight condition with an on-line neural network (NN) in order to regulate errors caused by approximate inversion. This eliminates the need for an extensive design process and accurate aerodynamic data. The simulation results using a developed full nonlinear 6 degree of freedom model are presented. This paper also presents the stability evaluation for control systems to which NNs were applied. Although feedback can accommodate uncertainty to meet system performance specifications, uncertainty can also affect the stability of the control system. The importance of robustness has long been recognized and stability margins were developed to quantify it. However, the traditional stability margin techniques based on linear control theory can not be applied to control systems upon which a representative non-linear control method, such as NNs, has been applied. This paper presents an alternative stability margin technique for NNs applied to control systems based on the system responses to an inserted gain multiplier or time delay element.