• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.579-584
• /
• 1998

Polymer dispersed liquid crystal(PDLC) composite films were made by polymerization induced phase separation method using UV-curing to investigate the effect of fabrication conditions, such as photoinitiator concentration, film thickness, polymerization temperature, and electric field during polymerization, etc., on the electro-optic properties. As the amount of photoinitiator increased, the driving voltage of PDLC device increased due to the increase of small-size liquid crystal phases. This was considered as the results from the increased interfacial area between liquid crystal (LC) and polymer matrix, since LC molecules at the interfacial regions were relatively difficult to response for the applied electric field. When the higher molecular weight oligomer (PTDA-1000) was used as matrix, the initial transmittance was observed to be relatively higher than that for the lower molecular weight oligomer (PTDA-250). Saturation transmittance for PTDA-1000 was observed at relatively lower voltage than that for PTDA-250, of which transmittance was not saturated even at 60 V. As polymerization temperature increased, the initial transmittance of resulting PDLC film increased due to the larger LC droplets formation and the more matched refractive index between LC and matrix than those cases for the lower polymerization temperature. Though driving voltage decreased for the thinner film, it was considered that optimum thickness of the film should be maintained to get some practical contrast, which is the ratio of off- and on-state transmittance. Furthermore, electro-optic properties such as initial transmittance, driving voltage, and response time were observed to be considerably affected by application of external field during polymerization.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.2
• /
• pp.295-310
• /
• 2014

DCS (Distributed Control System), the main control system of power plants, is an automated system for enhancing operational efficiency by monitoring, tuning and real-time operation. DCS is becoming more intelligent and open systems as Information technology are evolving. In addition, there are a large amount of investment to enable proactive facility management, maintenance and risk management through the predictive diagnostics. However, new upcoming weaponized malware, such as Stuxnet designed for disrupting industrial control system(ICS), become new threat to the main control system of the power plant. Even though these systems are not connected with any other outside network. The main control systems used in the power plant usually have been used for more than 10 years. Also, this system requires the extremely high availability (rapid recovery and low failure frequency). Therefore, installing updates including security patches is not easy. Even more, in some cases, installing security updates can break the warranty by the vendor's policy. If DCS is exposed a potential vulnerability, serious concerns are to be expected. In this paper, we conduct the penetration test by using NESSUS, a general-purpose vulnerability scanner under the simulated environment configured with the Ovation version 1.5. From this result, we suggest a log analysis method to detect the security infringement and react the incident effectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.198-210
• /
• 2022

The southern strait of Jeju is a divergence point of the Tsushima Warm Current (TWC), and it is the starting point of the thermohaline circulation in the waters of the Korean Peninsula, affecting the size and frequency of marine disasters such as typhoons and tsunamis, and has a very important oceanographic impact, such as becoming a source of harmful organisms and radioactively contaminated water. Therefore, for an immediate response to these maritime disasters, real-time ocean observation is required. However, compared to other straits, in the case of southern Jeju, such wide area marine observations are insufficient. Therefore, in this study, surface current field of the southern strait of Jeju was calculated using High-Frequency radar (HF radar). the large surface current field is calculated, and post-processing and data improvement are carried out through APM (Antenna Pattern Measurement) and FOL (First Order Line), and comparative analysis is conducted using actual data. As a result, the correlation shows improvement of 0.4~0.7 and RMSE of about 1~19 cm/s. These high-frequency radar observation results will help solve domestic issues such as response to typhoons, verification of numerical models, utilization of wide area wave data, and ocean search and rescue in the future through the establishment of an open data network.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.377-386
• /
• 2001

In spatial database system, spatial view is supported for efficient access method to spatial database and is managed by materialization and non-materialization technique. In non-materialization technique, repeated execution on the same query makes problems such as the bottle-neck effect of server-side and overloads on a network. In materialization technique, view maintenance technique is very difficult and maintenance cost is too high when the base table has been changed. In this paper, the SVMT (Spatial View Materialization Technique) is proposed by using R-tree re-construction. The SVMT is a technique which constructs a spatial index according to the distribution ratio of objects in spatial view. This ratio is computed by using a SVHR (Spatial View Height in R-tree) and SVOC (Spatial View Object Count). If the ratio is higher than the average, a spatial view is materialized and the R-tree index is re-used. In this case, the root node of this index is exchanged a node which has a MBR (Minimum Boundary Rectangle) value that can contains the whole region of spatial view at a minimum size. Otherwise, a spatial view is materialized and the R-tree is re-constructed. In this technique, the information of spatial view is managed by using a SVIT (Spatial View Information Table) and is stored on the record of this table. The proposed technique increases the speed of response time through fast query processing on a materialized view and eliminates additional costs occurred from repeatable query modification on the same query. With these advantages, it can greatly minimize the network overloads and the bottle-neck effect on the server.

• The KIPS Transactions:PartD
• /
• v.10D no.4
• /
• pp.591-602
• /
• 2003

Delay and discontinuance phenomenon of service are cause by sudden increase of the network communication amount and the quantity consumed of resources when Internet users are driven excessively to a conventional single large database sewer. To solve these problems, spatial database cluster consisted of several single nodes on high-speed network to offer high-performance is risen. But, research about spatial join operation that can reduce the performance of whole system in case process at single node is not achieved. So, in this paper, we propose efficient parallel spatial join processing method in a spatial database cluster system that uses data partitions and replications method that considers the characteristics of space data. Since proposed method does not need the creation step and the assignment step of tasks, and does not occur additional message transmission between cluster nodes that appear in existent parallel spatial join method, it shows performance improvement of 23% than the conventional parallel R-tree spatial join for a shared-nothing architecture about expensive spatial join queries. Also, It can minimize the response time to user because it removes redundant refinement operation at each cluster node.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.99-113
• /
• 2004

A new architecture called SAN(Storage Area Network) was developed in response to the requirements of high availability of data, scalable growth, and system performance. In order to use SAN more efficiently, most of SAN operating softwares support storage virtualization concepts that allow users to view physical storage devices attached to SAN as a large volume virtually h logical volume manager plays a key role in storage virtualization. It realizes the storage virtualization by mapping logical addresses to physical addresses. A logical volume manager also supports a snapshot that preserves a volume image at certain time and on-line reorganization to allow users to add/remove storage devices to/from SAN even while the system is running. To support the snapshot and the on-line reorganization, most logical volume managers have used table based mapping methods. However, it is very difficult to manage mapping table because the mapping table is large in proportion to a storage capacity. In this paper, we design and implement an efficient and flexible hybrid mapping method based on mathematical equations. The mapping method in this paper supports a snapshot and on-line reorganization. The proposed snapshot and on-line reorganization are performed on the reserved area which is separated from data area of a volume. Due to this strategy normal I/O operations are not affected by snapshot and reorganization. Finally, we show the superiority of our proposed mapping method through various experiments.

• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.703-711
• /
• 2018

Water distribution system (WDS) pipe bursts are caused from excessive pressure, pipe aging, and ground shift from temperature change and earthquake. Prompt detection of and response to the failure event help prevent large-scale service interruption and catastrophic sinkhole generation. To that end, this study proposes a improved Western Electric Company (WECO) method to improve the detection effectiveness and efficiency of the original WECO method. The original WECO method is an univariate Statistical Process Control (SPC) technique used for identifying any non-random patterns in system output data. The improved WECO method multiples a threshold modifier (w) to each threshold of WECO sub-rules in order to control the sensitivity of anomaly detection in a water distribution network of interest. The Austin network was used to demonstrated the proposed method in which normal random and abnormal pipe flow data were generated. The best w value was identified from a sensitivity analysis, and the impact of measurement frequency (dt = 5, 10, 15 min etc.) was also investigated. The proposed method was compared to the original WECO method with respect to detection probability, false alarm rate, and averaged detection time. Finally, this study provides a set of guidelines on the use of the WECO method for real-life WDS pipe burst detection.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.89-97
• /
• 2012

In recent years, efficient energy management technologies are required, as environmental problems have emerged worldwide. In response to this, smart home services focused on efficient energy management technology seems to be emerging. And the integration of technology of user-oriented real-time energy monitoring and control systems is required. In this paper, we present a location-based green home service using smart phones for efficient energy management in a house. We design a green home network system to apply the green home service, and implement an integrated gateway system which connects and controls each appliance in a house. We develop appliance control services and indoor location services on smart phones, and determine whether user's occupancy of each room by measuring the location according to the variation of signal strength. In order to evaluate the performance of the energy savings, we have set up the scenarios of energy usage pattern and have compared the energy variation resulting from the application of the indoor location services with smart meters. A comparison of energy usage demonstrated that the energy saving of a house with the proposed location-based green home service was down up to 30%.

• Journal of Korea Water Resources Association
• /
• v.54 no.7
• /
• pp.523-534
• /
• 2021

Meteorological drought originates from a precipitation deficiency and propagates to agricultural and hydrological droughts through the hydrological cycle. Comparing with the meteorological drought, agricultural and hydrological droughts have more direct impacts on human society. Thus, understanding how meteorological drought evolves to agricultural and hydrological droughts is necessary for efficient drought preparedness and response. In this study, meteorological and hydrological droughts were defined based on the observed precipitation and the synthesized streamflow by the land surface model. The Bayesian network model was applied for probabilistic analysis of the propagation relationship between meteorological and hydrological droughts. The copula function was used to estimate the joint probability in the Bayesian network. The results indicated that the propagation probabilities from the moderate and extreme meteorological droughts were ranged from 0.41 to 0.63 and from 0.83 to 0.98, respectively. In addition, the propagation probabilities were highest in autumn (0.71 ~ 0.89) and lowest in winter (0.41 ~ 0.62). The propagation probability increases as the meteorological drought evolved from summer to autumn, and the severe hydrological drought could be prevented by appropriate mitigation during that time.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.131-141
• /
• 2022

Future battlefield domains are expanding to ground, sea, air, space, and cyber, so future military operations are expected to be carried out simultaneously and complexly in various battlefield domains. In addition, the application of convergence technologies that create innovations in all fields of economy, society, and defense, such as artificial intelligence, IoT, and big data, is being promoted. However, since the current Korean military C4I system manages warfighting function DBs in one DB server, the efficiency of combat performance is reduced utilization and distribution speed of data and operation response time. To solve this problem, research is needed on how to apply the 4th industrial revolution technologies such as AI, IoT, 5G, big data, and cloud to the Korean military C4I system, but research on this is insufficient. Therefore, this paper analyzes the problems of the current Korean military C4I system and proposes to apply the 4th industrial revolution technology in terms of operational mission, network and data link, computing environment, cyber operation, interoperability and interlocking capabilities.