• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1770-1785
• /
• 2013

In this paper, a multi-hop transmission protocol based on parallel communication of secondary users (SUs) is proposed. The primary multi-hop network coexists with a set of SUs by cooperative spectrum sharing. The main optimization target of our protocol is the overall performance of the secondary system with the guarantee of the primary outage performance. The energy consumption of the primary system is reduced by the cooperation of SUs. The aim of the primary source is to communicate with the primary destination via a number of primary relays. SUs may serve as extra decode-and-forward relays for the primary network. When an SU acts as a relay for a primary user (PU), some other SUs that satisfy the condition for parallel communication are selected to simultaneously access the primary spectrum for secondary transmissions. For the proposed protocol, two opportunistic routing strategies are proposed, and a search algorithm to select the SUs for parallel communication is described. The throughput of the SUs and the PU is illustrated. Numerical results demonstrate that the average throughput of the SUs is greatly improved, and the end-to-end throughput of the PU is slightly increased in the proposed protocol when there are more than seven SUs.

• Journal of Hydrogen and New Energy
• /
• v.19 no.5
• /
• pp.403-409
• /
• 2008

Polymer electrolyte membrane fuel cell (PEMFC) is very interesting power source due to high power density, simple construction and operation at low temperature. But it has problems such as high cost, improvement of performance, effect of temperature and initial start at low temperature. These problems can be approached to be solved by using experiment and mathematical method which are general principles for analysis and optimization of control system for heat and hydrogen detecting management. In this paper, insulation vessel and control system for stable operation of fuel cell at low temperature were developed for experiment. The constant temperature capability and the heating time at sub-zero temperatures with insulation control system were studied by using a heating bar of 60W class. PEMFC stack which was made by 4 cells with $50\;mc^2$ active area in each cell is a thermal source. Times which take to reach constant temperature by the state of insulation vacuum were measured at variable environment temperatures. The test was performed at two conditions: heating mode and cooling mode. Constant temperature capability was better at lower environment temperature and vacuum pressure. The results of this experiment could be used as basis data about stable operation of fuel cell stack in low temperature zone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.353-364
• /
• 2002

To prevent the performance degradation of TCP due to packet loss in the smooth handoff by the route optimization extension of Mobile If protocol, a buffering of packets at a base station is needed. A buffering of packets at a base station recovers the packets dropped during the handoff by forwarding the buffered packets at the old base station to the mobile user. But, when the mobile user moves to a new foreign network which is connected to a congested router, the buffered packets forwarded by the old base station are dropped and the link utilization performance degraded due to increased congestion by the forwarded packets. In this paper, when the mobile user moves to a new foreign network which is connected to a congested router, Ive propose a packet forwarding control scheme required far the old base station to improve TCP performance in mobile networks. The old base station forwards or discards the buffered packets during handoff by proposed packet forwarding control scheme based on congestion states of RED(Random Early Detection) at the congested router. Simulation results slow that link utilization performance can be improved by applying proposed packet forwarding control scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.64-76
• /
• 2017

Routing in mobile ad hoc networks (MANETs) is highly challenging because of the dynamic nature of network topology. AntHocNet is a bio-inspired routing protocol for MANETs that mimics the foraging behavior of ants. However, unlike many other MANET routing protocols, the paths constructed in AntHocNet are unidirectional, which requires a separate path setup if a route in the reverse direction is also required. Because most communication sessions are bidirectional, this unidirectional path setup approach is often inefficient. Moreover, AntHocNet suffers from looping problems because of its property of multiple paths and stochastic data routing. In this paper, we propose a modified path setup procedure that constructs bidirectional paths. We also propose solutions to some of the looping problems in AntHocNet. Simulation results show that performance is significantly enhanced in terms of overhead, end-to-end delay, and delivery ratio when loops are prevented. Performance is further improved, in terms of overhead, when bidirectional paths setup is employed.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.107-116
• /
• 2011

Recently, femtocell has been concerned as one of effective solutions to relieve shadow region and provide high quality services to users in indoor environments. Even though femtocell offers various benefits to cellular operators and users, many technical issues, such as interference coordination, network synchronization, self-configuration, self-optimization, and so on, should be solved to deploy the femtocell in current network. In this paper, we develop a simulator for evaluating performance of long term evolution (LTE) femtocell systems under various interference scenarios. The simulator consists of a main-module and five sub-modules. The main-module connects and manages five sub-modules which have the functionality managing user mobility, packet scheduling, call admission control, traffic generation, and modulation and coding scheme (MCS). To provide user convenience, the simulator adopts graphical user interface (GUI) which can observes simulation results in real time. We expect that this simulator can contribute to developing effective femtocell systems by supporting a tool for analyzing the effect of interference between macrocell and femtocell.

• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.67-73
• /
• 2011

Handover in high speed mobile communication service, in particulary mobile WiMAX is supported efficiency mobility to 120km/h speed. But, in order to accommodate number of user increment in a cell, wireless network is increment to microcell and picocell by allocate bandwidth and by decrease cell size. handover is occurrent and increment connection failure ratio In this result. IEEE 802.16 standard is support seamless connection through handover optimization scheme. But because authentication process is abbreviate, network weakness is exposure. In this paper, we propose handover scheme for support realtime service as VoIP, Picure communication, Streaming Data Service in order to support partially encryption method. In experiment, proposed scheme is proof which process time is increment 20% more than previous scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.9
• /
• pp.373-383
• /
• 2003

In this paper we discuss the effect of the delay limit and the packet size related to the quality of service on a VoIP system using the Internet. We also provide a guideline to determining the optimal packet size of the voice data for a given delay limit. Empirical studies are done with two personal computers connected through the packet switched public IP network. The sender encodes the voice signal from the microphone to get PCM and ADPCM data and sends the data to the receiver using UDP packets. The receiver plays the reconstructed voice from the stream with lost and delayed packets. The quality of the reconstructed voice is evaluated offline by the MNB (Measuring Normal Block) method using the data acquired from the both sides. The result shows that under the delay limit of 100ms for 40Kbps, 32Kbps and l6Kbps of ADPCM data, the minimum packet size should be 300bytes, 400bytes and 600bytes respectively and the maximum packet size should be l200bytes commonly for the best quality of voice.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.6
• /
• pp.9-17
• /
• 2012

High-quality multimedia on the Internet has attracted attention because of its wide application area. IP multicast has been proposed as a solution to use efficient network resources in these services. However, IP multicast has not been commonly used due to a number of practical issues such as security and management. As an alternative, an overlay multicast routing which is performed in upper protocol layers on legacy networks without changing hardware has been presented. Yet, the maximum data transmission capacity of the overlay multicast is not sufficient for real time transmission of multimedia data. In this paper, we have implemented an overlay multicast engine on NetFPGA which allows us to perform packet replication and tunneling which need high-speed. In addition, we have implemented extra portions which need low-speed in software. From now on, we will progress research which increase the number of terminal spots which can be replicated by improvement and amplify throughputs by optimization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.71-79
• /
• 2003

As the traffic grows rapidly in the Internet, the QoS guarantee of the flows and the traffic engineering problems have become very important issues. MPLS has more advantages to solve the problems than existing IP routing because of its use of multiple paths between the source and destination pairs Particularly, the availability of Constraint-based Shortest Path First(CSPF) algorithm and explicit route in MPLS made the problem referred above to be solved efficiently. However, the CSPF algorithm has the characteristic of selecting the shortest path of all paths which meet the traffics' QoS constraints Therefore, even though there are alternative paths to route traffic, alternate QoS paths may not be found and best-effort traffic will be dropped during congestion period In this paper, we present the network resource optimization method related to the traffic engineering by using load balancing through routing in MPLS network.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.259-269
• /
• 2020

With the proposal-agreement procedure, RSTP can reduce the network recovery time to 400 ms or less in the case of 40 bridges. While the legacy RSTP reverts the previous agreement at the bridge with the alternate port role in the ring during the fault recovery, a new position based fast fault recovery procedure is proposed in this paper to guarantee a single proposal-agreement transaction which can provide more faster recovery. By knowing the relative position of the faulty link or bridge in hops, the bridge on the middle of the ring can complete the recovery procedure without revert. The performance of proposed procedure is numerically calculated and verified by simulation and the result shows that the recovery time can be reduced up to 100 ms, which is 1/4 times of the legacy RSTP.