• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.274-279
• /
• 2008

In this paper, we will presents the join procedure for efficient network performance in the ZigBee Sensor Network. In existing network, new devices join procedure is performed base on the participating in the already Coordinator and Router beacon information. However, beacon has insufficient information network. Thus, the concentration of traffic and inefficient use of resources, address the problem that occurs. To solve these problems, the Coordinator and router on the network, depending on their location and the ability to transfer a beacon. This algorithm is proposed in the paper, the transmission time by using the beacon, network configuration control of the network to improve performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1887-1891
• /
• 2005

Despite significant advances in multimedia transferring technologies in various fields of robotics, it is sometimes quite difficult for the operator to fully understand the context of 3D remote environments from 2D image feedback. Particularly, in the remote control of mobile robots, the recognition of the object associated with the task is very important, because the operator has to control the robot safely in various situations not through trial and error. Therefore, it is necessary to provide the operator with 3D volumetric models of the object and object-related information as well such as locations, shape, size, material properties, and so on. Thus, in this paper, we propose a vision-based human interface system that provides an interactive, information-rich map through network-based information brokering. The system consists of an object recognition part, a 3D map building part, a networked knowledge base part, and a control part of the mobile robot.

• Earthquakes and Structures
• /
• v.3 no.3_4
• /
• pp.315-340
• /
• 2012

There are many types of seismic isolation devices that are being used today for structural control of earthquake response in buildings. The most commonly used are sliding bearings and elastomeric bearings, the latter with or without lead core. An alternative solution is the use of steel springs combined with viscoelastic fluid dampers, which is the case discussed in this paper. An analytical study of a three-story building supported on helical steel springs and viscoelastic fluid dampers, GERB Control System (GCS), subjected to near-fault earthquakes is presented. Several earthquakes records have been obtained by the acceleration network installed in the isolated building and in its non-isolated twin since they were finished. These experimental results are analysed and discussed. The aim is to show that the spring-based system can be an alternative for base isolation of small building located near active faults.

• Journal of Korean Society for Quality Management
• /
• v.24 no.2
• /
• pp.172-178
• /
• 1996

In this study, we developed a software for statistical process control. This software presents $\bar{x}$, R, CUSUM, EWMA control chart and process capability index. In this system, statistical process control methods are integrated into the automated method on a real time base. It is available in process control of specified type and can be performed on personal computer with network system.

• ETRI Journal
• /
• v.42 no.5
• /
• pp.700-711
• /
• 2020

Because of the rapid increase of mobile traffic, flexible broadband supportive unmanned aerial vehicle (UAV)-based 6G mobile networks using free space optical (FSO) links have been recently proposed. Considering the advancements made in UAVs, big data processing, and artificial intelligence precision control technologies, the formation of an additional wireless network based on UAV aerial platforms to assist the existing fixed base stations of the mobile radio access network is considered a highly viable option in the near future. In this paper, a combined time bound optimization scheme is proposed that can adaptively satisfy the control and communication time constraints as well as the processing time constraints in FSO-based 6G UAV aerial networks. The proposed scheme controls the relation between the number of data flows, input data rate, number of worker nodes considering the time bounds, and the errors that occur during communication and data processing. The simulation results show that the proposed scheme is very effective in satisfying the time constraints for UAV control and radio access network services, even when errors in communication and data processing may occur.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.5
• /
• pp.219-231
• /
• 2005

Many applications in cluster computing require QoS (Quality of Service) services. Since performance predictability is essential to provide QoS service, underlying systems must provide predictable performance guarantees. One way to ensure such guarantees from network subsystems is to generate global schedules from applications'network requests and to execute the local portion of the schedules at each network interface. To ensure accurate execution of the schedules, it is essential that a global time base must be maintained by local clocks at each network interface. The task of providing a single time base is called a synchronization problem and this paper addresses the problem for system area networks. To solve the synchronization problem, FM-QoS (1) proposed a simple synchronization mechanism called FBS(Feedback-Based Synchronization) which uses built-in How control signals. This paper extends the basic notion of FM-QoS to a theoretical framework and generalizes it: 1) to identify a set of built-in network flow control signals for synchrony and to formalize it as a synchronizing schedule, and 2) to analyze the synchronization precision of FBS in terms of flow control parameters. Based on generalization, two application classes are studied for a single switch network and a multiple switch network. For each class, a synchroniring schedule is proposed and its bounded skew is analyzed. Unlike FM-QoS, the synchronizing schedule is proven to minimize the bounded skew value for a single switch network. To understand the analysis results in practical networks, skew values are obtained with flow control parameters of Myrinet-1280/SAN. We observed that the maximum bounded skew of FBS is 9.2 Usec or less over all our experiments. Based on this result, we came to a conclusion that FBS was a feasible synchronization mechanism in system area networks.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1228-1229
• /
• 2011

A novel approach has been promoted for FNN ship controllers. An Electro-hydraulic governor has been widely adopted to the ship speed control of propulsion marine diesel engines for a long time, it was very difficult for Electro-hydraulic governor to regulate the speed of high power engine with long stroke at low speed and low load, because of the jiggling phenomena by rough fluctuation of rotating torque and the hunting phenomena by long dead time occurred in fuel combustion process in the engine cylinder. This paper provides an efficient way for improving control performance by FNN controller. An RBF neural network and GA optimization are employed in a fuzzy neural controller to deal with the nonlinearity, time varying and uncertain factors, the rule base and membership functions can be auto-adjusted by GA optimization. The parameters of neural network can be decreased by using union-rule configuration in the hidden layer of the network. The performance of controller is evaluated by the system simulation using simulink tools.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3468-3495
• /
• 2015

In this paper, we present a multi-chain based hierarchical topology control algorithm (MCHTC) for wireless sensor networks. In this algorithm, the topology control process using static clustering is divided into sensing layer that is composed by sensor nodes and multi-hop data forwarding layer that is composed by leader nodes. The communication cost and residual energy of nodes are considered to organize nodes into a chain in each cluster, and leader nodes form a tree topology. Leader nodes are elected based on the residual energy and distance between themselves and the base station. Analysis and simulation results show that MCHTC outperforms LEACH, PEGASIS and IEEPB in terms of network lifetime, energy consumption and network energy balance.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1042-1046
• /
• 1993

This paper describes a control scheme for a robot manipulator system which uses visual information to position and orientate the end-effector. In this scheme, the position and orientation of the target workpiece with respect to the base frame of the robot are assumed to be unknown, but the desired relative position and orientation of the end-effector to the target workpiece are given in advance. The control scheme directly integrates visual data into the servoing process without subdividing the process into determination of the position and orientation of the workpiece and inverse kinematics calculation. A neural network system is used for determining the change in joint angles required in order to achieve the desired position and orientation. The proposed system can be control the robot so that it approach the desired position and orientation from arbitrary initial ones. Simulation for the robot manipulator with six degrees of freedom will be done. The validity and the effectiveness of the proposed control scheme will be verified by computer simulations.

• Structural Engineering and Mechanics
• /
• v.30 no.6
• /
• pp.679-698
• /
• 2008

On marine vessels, delicate instruments such as navigation radars are normally mounted on ship masts. However the vibrations at the top of mast where the radar is mounted often cause serious deterioration in radar-tracking resolution. The most serious problem is caused by the rotational vibrations at the top of mast that may be due to wind loading, inertial loading from ship rolling and base excitations induced by the running propeller. This paper presents a method of semi-active vibration control using magneto-rheological (MR) dampers to reduce the rotational vibration of the mast. In the study, the classical optimal control algorithm, the independent modal space control algorithm and the double input - single output fuzzy control algorithm are employed for the vibration control. As the phenomenological model of an MR damper is highly nonlinear, which is difficult to analyse, a back- propagation neural network is trained to emulate the inverse dynamic characteristics of the MR damper in the analysis. The trained neural network gives the required voltage for each MR damper based on the displacement, velocity and control force of the MR damper quickly. Numerical simulations show that the proposed control methods can effectively suppress the rotational vibrations at the top of mast.