• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.671-676
• /
• 2014

Based on the data of PSC information management system of MOF(Ministry of oceans and fisheries) and APCIS(Asia-Pacific Computerized Information System) of Tokyo-MOU information system, the result of the evaluation on the reality of PSC was done, and base on 2009, it showed a trend of decrease in every DFR(Deficiency Rate) and DTR(Detention Rate). But for vessels built for more than 30 years, flags of convenience vessels, RO-RO ferry and general cargo vessel, small size vessels with gross tonnage less than 1,000 ton showed a high DFR and DTR. Each harbours is classified by the total harbours' average DFR which was 82.5 % and the average DTR was 5.1 %, excluding the Jeju harbour, showing a hugh deviation for classification of each harbour. Classification of each harbour has to be inspected by PSC and it showed a great unbalance of the number of vessels for each territory for inspection. the biggest problem with our country's PSC, where it was pointed out by the PSCO was lack of workers and independent inspection by just one worker. To strength the substantiality of the inspection of our country is to have concentrated inspection on the high risk cautious vessels, forming a human network each classified by four different sectors of the area, recalculating the amount of assignment of inspection classified by each harbour and securing workforce the PSCO improvements are necessary.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.6
• /
• pp.575-582
• /
• 2016

Seoul city has high population density as well as high traffic congestion, which are vulnerable to exposure of environmental pollutions caused by car traffic. However, recent studies are only on local regions about road traffic and air pollution or health effect of road traffic on residents. Thus, comprehensive study data are needed in terms of overall Seoul regions. In this study utilized the nitrogen dioxide concentration through the national air pollution monitoring network data, 2012 to 2013. It also divided regions into high and low exposure districts via the Origin destination data developed by the Korea transport institute to quantify and evaluate the effect of transport policies and analyzed a correlation of asthma symptoms with high and low exposure districts through raw data of community health survey from the Korea centers for disease control and prevention. Based on the collected data, the pearson's correlation analysis was conducted between air pollution substance concentration and high exposure district and multiple logistic regression analysis was conducted to determine the effect of traffic environment and factors on asthma symptoms of residents. Accordingly, the following results were derived. First, the high exposure district was higher concentrations of nitrogen dioxide ($NO_2$) as per time compared to those of the low exposure district (p<0.01). Second, analysis on correlation between average daily environmental concentration in the air pollution monitoring network and road traffic showed that nitrogen dioxide had a significant positive correlation (p<0.01) with car traffic and total traffic as well as with truck traffic (p<0.05) statistically. Third, an adjusted odds ratio about asthma doctor's diagnosis in the high and low exposure districts was analyzed through the logistic regression analysis. With regard to an adjusted model 2 (adjusted gender, age, health behavior characteristics, and demographic characteristics) odds ratio of asthma doctor's diagnosis in the high exposure district was 1.624 (95% CI: 1.269~2.077) compared to that of the low exposure district, which was significant statistically (p<0.001).

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.119-126
• /
• 2011

During precise survey on the top of High rise buildings and civil structures, optical surveying equipments like a Total Station are not recommended to use because of some reasons that uneasier alignment with reflectors located at the top of building, increasing error depends on increasement of observation distance and unavailable dynamic positioning etc. Recently various GPS positioning methods have been applied to this job however almost of them are post-processing method which is required much longer time during for whole process includes stake-out, cross checking, fixing positions and final inspections. Therefore, in this study, we applied with RTK surveying system which allows stake-out and inspection in realtime to avoid delaying of construction schedule and also applied with Quasi Static RTK measurement and network adjustment to get a high accuracy within a few millimeters in structure positioning to achieve a successful management for process and quality control of the project. As a result, very high accurate surveying for structures within approx. 2mm in realtime has been achieved when surveyor conduct a network adjustment using least square method for 4 base lines created by Quasi Static RTK data and we expect this method will be applied to construction survey for high rise buildings and civil structures in the future.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.151-164
• /
• 2009

The importance of sensor networks as a base of ubiquitous computing realization is being highlighted, and espicially the security is recognized as an important research isuue, because of their characteristics.Several efforts are underway to provide security services in sensor networks, but most of them are preventive approaches based on cryptography. However, sensor nodes are extremely vulnerable to capture or key compromise. To ensure the security of the network, it is critical to develop security Intrusion Detection System (IDS) that can survive malicious attacks from "insiders" who have access to keying materials or the full control of some nodes, taking their charateristics into consideration. In this perper, we design a distributed and adaptive IDS architecture on sensor networks, respecting both of energy efficiency and IDS efficiency. Utilizing a modified HEED algorithm, a clustering algorithm, distributed IDS nodes (dIDS) are selected according to node's residual energy and degree. Then the monitoring results of dIDSswith detection codes are transferred to dIDSs in next round, in order to perform consecutive and integrated IDS process and urgent report are sent through high priority messages. With the simulation we show that the superiorities of our architecture in the the efficiency, overhead, and detection capability view, in comparison with a recent existent research, adaptive IDS.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.3
• /
• pp.322-331
• /
• 2003

As the complexity of a 3D game is increased by various factors of the game scenario, it has a problem for controlling the interrelation of the game objects. Therefore, a game system has a necessity of the coordination of the responses of the game objects. Also, it is necessary to control the behaviors of animations of the game objects in terms of the game scenario. To produce realistic game simulations, a system has to include a structure for designing the interactions among the game objects. This paper presents a method that designs the dynamic control mechanism for the interaction of the game objects in the game scenario. For the method, we suggest a game agent system as a framework that is based on intelligent agents who can make decisions using specific rules. Game agent systems are used in order to manage environment data, to simulate the game objects, to control interactions among game objects, and to support visual authoring interface that ran define a various interrelations of the game objects. These techniques can process the autonomy level of the game objects and the associated collision avoidance method, etc. Also, it is possible to make the coherent decision-making ability of the game objects about a change of the scene. In this paper, the rule-based behavior control was designed to guide the simulation of the game objects. The rules are pre-defined by the user using visual interface for designing their interaction. The Agent State Decision Network, which is composed of the visual elements, is able to pass the information and infers the current state of the game objects. All of such methods can monitor and check a variation of motion state between game objects in real time. Finally, we present a validation of the control method together with a simple case-study example. In this paper, we design and implement the supervised classification systems for high resolution satellite images. The systems support various interfaces and statistical data of training samples so that we can select the most effective training data. In addition, the efficient extension of new classification algorithms and satellite image formats are applied easily through the modularized systems. The classifiers are considered the characteristics of spectral bands from the selected training data. They provide various supervised classification algorithms which include Parallelepiped, Minimum distance, Mahalanobis distance, Maximum likelihood and Fuzzy theory. We used IKONOS images for the input and verified the systems for the classification of high resolution satellite images.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.618-633
• /
• 2014

Relay technology is becoming more important for mobile communications and wireless internet of things (IoT) networking because of the extended access network coverage range and reliable quality of service (QoS) it can provide at low power consumption levels. Existing mobile multihop relay (MMR) technology uses fixed-point stationary relay stations (RSs) and a divided time-frame (or frequency-band) to support the relay operation. This approach has limitations when a local fixed-point stationary RS does not exist. In addition, since the time-frame (or frequency-band) channel resources are pre-divided for the relay operation, there is no way to achieve high channel utilization using intelligent opportunistic techniques. In this paper, a different approach is considered, where the use of mobile/IoT devices as RSs is considered. In applications that use mobile/IoT devices as relay systems, due to the very limited battery energy of a mobile/IoT device and unequal channel conditions to and from the RS, both minimum energy consumption and QoS support must be considered simultaneously in the selection and configuration of RSs. Therefore, in this paper, a mobile RS is selected and configured with the objective of minimizing power consumption while satisfying end-to-end data rate and bit error rate (BER) requirements. For the RS, both downlink (DL) to the destination system (DS) (i.e., IoT device or user equipment (UE)) and uplink (UL) to the base station (BS) need to be adaptively configured (using adaptive modulation and power control) to minimize power consumption while satisfying the end-to-end QoS constraints. This paper proposes a minimum transmission power consuming RS selection and configuration (MPRSC) scheme, where the RS uses cognitive radio (CR) sub-channels when communicating with the DS, and therefore the scheme is named MPRSC-CR. The proposed MPRSC-CR scheme is activated when a DS moves out of the BS's QoS supportive coverage range. In this case, data transmissions between the RS and BS use the assigned primary channel that the DS had been using, and data transmissions between the RS and DS use CR sub-channels. The simulation results demonstrate that the proposed MPRSC-CR scheme extends the coverage range of the BS and minimizes the power consumption of the RS through optimal selection and configuration of a RS.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.293-304
• /
• 2011

The world of ubiquitous computing is one in which we will be surrounded by an ever-richer set of networked devices and services. Especially, mobile phone now becomes one of the key issues in ubiquitous computing environments. Mobile phones have been infecting our normal lives more thoroughly, and are the fastest technology in human history that has been adapted to people. In Korea, the number of mobile phones registered to the telecom company, is more than the population of the country. Last year, the numbers of mobile phone sold are many times more than the number of personal computer sold. The new advanced technology of mobile phone is now becoming the most concern on every field of technologies. The mix of wireless communication technology (wifi) and mobile phone (smart phone) has made a new world of ubiquitous computing and people can always access to the network anywhere, in high speed, and easily. In such a world, people cannot expect to have available to us specific applications that allow them to accomplish every conceivable combination of information that they might wish. They are willing to have information they want at easy way, and fast way, compared to the world we had before, where we had to have a desktop, cable connection, limited application, and limited speed to achieve what they want. Instead, now people can believe that many of their interactions will be through highly generic tools that allow end-user discovery, configuration, interconnection, and control of the devices around them. Serendipity is an application of the architecture that will help people to solve a concern of achieving their information. The word 'serendipity', introduced to scientific fields in eighteenth century, is the meaning of making new discoveries by accidents and sagacity. By combining to the field of ubiquitous computing and smart phone, it will change the way of achieving the information. Serendipity may enable professional practitioners to function more effectively in the unpredictable, dynamic environment that informs the reality of information seeking. This paper designs the Serendipity Service based on NFC (Near Field Communication) technology. When users of NFC smart phone get information and services by touching the NFC tags, serendipity service will be core services which will give an unexpected but valuable finding. This paper proposes the architecture, scenario and the interface of serendipity service using tag touch data, serendipity cases, serendipity rule base and user profile.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.1
• /
• pp.71-82
• /
• 1996

In this paper, the Doppler phase error due to the relative velocity between a satellite and the earth station in communications using a low earth orbit mobile satellite is detected. The performance of BPSK system in the presence of Rician fading with Doppler phase error and interference, noise is compared with that of the system disturbed by Doppler phase error and noise only. The expression of error rate performance of BPSK system is derived as the type of complementary error function. The numerical calculation of the induced equation are performed in terms of satellite-height, orbit-eccentricity, the velocity of the earth, Rician fading parameter, signal to interference rateio (SIR), the ratio of carrier frequency and base band bit rate. The main conclusion that can be drawn from this analysis is that Rician fading channel environment with Doppler phase error and interference effect yields severe performance degradation than Do- ppler phase error and noise effect in satellite communication channel. And using the numerical calculation, we give a quantitative insight how much the satellite communication channel parameters degrade the system performance. Furthermore it is shown that an appropriate transmission power control for the performance enhancement is beneficial to the new satellite communication system planning.

• Korean Journal of Child Studies
• /
• v.1
• /
• pp.94-106
• /
• 1980

The issue presented in this paper are as follows: 1. Legislative actions of welfare-related law for the exceptional children. The legislative base for the evolution has been yet weak and ambigous at best for a formalization of what should be considered accepted practice and effective action in providing handicapped child and their parents educational rights and equal protection of the law. And they are under remote control of partial factor subject to social welfare law for children, and public law for education, promotion law for the exceptional child education, protection law for public aids. 2. Organization of government for the welfare services for the exceptional children. There is no sing of a push toward consolidation of effort for the welfare service of the exceptional children in this country that seeks to recapture a sense of unity, of coherence, of completeness from a reality made up of discontinuous fragments of humanitarian effora This presently that. as for the education of the exceptional child, by the section of the exceptional education in MOE (Ministry of Education), and/or as for welfare services and promotion actions, by the section of child welfare in MHSA (Ministry of Health and Social Affairs). One door type operation rooted in the specialization, and limited resources to evolve multi-purpose agencies that undertake to provide a broad range of tangible and concrete services, as well as supportive counselling and assessment, under a single management which plans and directs the allocations of resources, should be followed. 3. Facilities and recruitment of teachers for the exceptional children. In this country there are 54 facilities for special services, 56 schools for the exceptional education, and 3 colleges and equavalents that provide teacher training services leading to certification with IIO annual graduates. However, curriculum for exceptional children should be rearranged and reconstructed. Conclusion; Only as for social welfare institutions in community, this country produced a succession of specific purpose activities, over period of time, that accumulated to form the present network of hundreds of social welfare organizations and facilities Periodically major efforts were launched to revitalize or to improve the help-giving system. But they lack specialization to be effective, and the nature of multi-purpose center tends to be vague for the classified handicapped. Therefore, there, should be linkage between policy maker and community services to maintain some coherenty in preventive care, treatment, and after cares. At last, the effects of the current concept "the exceptional child" involved with their families, and their neighborhood should be considered in view of the people who consist about 25% of the total population.