• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.242-244
• /
• 2002

고집적 반도체 소자에서 발생하는 열의 효과적인 전달을 위한 구리 모재의 초소형 히트파이프를 제작하였다. 제작된 초소형 히트 파이프는 높이 100 ${\mu}m$의 채널 어레이가 형성되어 있는 하부 구리 기판과 그것을 덮는 상부 구리 기판으로 구성된다. 채널의 개수는 44개이고. 길이는 24 mm이다. 하부 구리 기판 위에 음성 후막 감광제 JSR THB 151N을 도포하고 사진 현상 공정으로 미세 채널 몰드를 형성한 후, 구리 전기 도금을 이용하여 채널 격벽을 제작한다. 미세 채널 몰드는 습식 방법으로 완전하게 제거된다. 제작된 하부 구리 기판은 에폭시로 상부 구리 기판과 부착 후 옆면에 구리 전기 도금으로 완전히 접합한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.431-432
• /
• 2012

In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1429-1434
• /
• 2004

Immunoassay is one of the important analytical methods for clinical diagnoses and biochemical studies, but needs a long time, troublesome procedures and expensive reagents. In this study, therefore, we propose the micro filter chip with microbeads for immunoassay, which has pillar structures. The advantage of the proposed micro filter chip is to use simple fabrication process and cheap materials. The mold was made by the photolithography technique with Si wafer and negative photoresist SU-8. The replica was made of PDMS, bonded on the pyrex glass. The micro filter chip consists of inlet channel, filter chamber and outlet channel. HBV (Hepatitius B virus) monoclonal antibody (Ag1) labeled with biotin were immobilized onto streptavidin coated beads of 30∼50 $\mu$m size. Fluorescein isothiocyanate (FITC)-labeled HBV monoclonal antibody (Ag8) was used to detect HBsAg (Hebatitis B virus surface Antigen), and fluorescence intensity was monitored by epi-fluorescence microscope. In this study, the immune response of less than 30 min was obtained with with the use of 100 $m\ell$ of sample.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권5호
• /
• pp.182-188
• /
• 2003

We have demonstrated a fluidic technique for self-assembly of microfabricated parts onto substrate using patterned shapes of magnetic force self-assembled monolayers (SAMs). The metal particles and the array were fabricated using the micromachining technique. The metal particles were in a multilayer structure (Au, Ti, and Ni). Sidewalls of patterned Ni dots on the array were covered by thick negative photoresist (SU-8), and the array was magnetized. The array and the particles were mixed in buffer solution, and were arranged by magnetic force interaction. Binding direction of the metal particle onto Ni dots was controlled by multilayer structure and direction of magnetization. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost even with the Au surface on top. The particles were successfully arranged on the array.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1314-1319
• /
• 2006

This paper describes the novel fabrication method of the high-aspect-ratio nano structure which is impossible by conventional method using a shadow mask and a Deep X-ray Lithography (DXRL). The shadow mask with $1{\mu}m-sized$ apertures is fabricated on the silicon membrane using a conventional UV-lithography. The size of aperture is reduced to 200nm by accumulated low stress silicon nitride using a LPCVD (low pressure chemical vapor deposition) process. The X-ray mask is fabricated by depositing absorber layer (Au, $3{\mu}m$) on the back side of nano shadow mask. The thickness of an absorber layer must deposit dozens micrometers to obtain contrast more than 100 for a conventional DXRL process. The thickness of $3{\mu}m-absorber$ layer can get sufficient contrast using a central beam stop method, blocking high energy X-rays. The nano circle and nano line, 200nm in diameter in width, respectively, were demonstrated 700nm in height with a negative photoresist of SU-8.

• 센서학회지
• /
• 제28권4호
• /
• pp.251-255
• /
• 2019

We propose a two-step lithography process to minimize edge-bead issues caused by thick photoresist (PR) coating. In the conventional PR process, the edge bead can be efficiently removed by applying an edge-bead removal (EBR) process while rotating the silicon wafer at a high speed. However, applying conventional EBR to the production of desired PR mold with unique negative patterns cannot be used because a lower rpm of spin coating and a lower temperature in the soft bake process are required. To overcome this problem, a two-step lithography process was developed in this study and applied to the fabrication of a polydimethylsiloxane (PDMS) film having super-hydrophobic characteristics. Following UV exposure with a first photomask, the exposed part of the silicon wafer was selectively removed by applying a PR developer while rotating at a low rpm. Then, unique PR mold structures were prepared by employing an additional under-exposure process with a second mask, and the mold patterns were transferred to the PDMS. Results showed that the fabricated PDMS film based on the two-step lithography process reduced the height difference from 23% to 5%. In addition, the water contact angle was greatly improved by spraying of hydrophobic nanosilica on the dual-scaled PDMS surface.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.546-551
• /
• 2009

In this paper, we describe a self-aligned fabrication method for a nano-patterned bottom electrode using flood exposure from the backside. Misalignments between layers could cause the final devices to fail after the fabrication of the nano-scale bottom electrodes. A self-alignment was exploited to embed the bottom electrode inside the glass substrate. Aluminum patterns act as a dry etching mask to fabricate glass trenches as well as a self-aligned photomask during the flood exposure from the backside. The patterned photoresist (PR) has a negative sidewall slope using the flood exposure. The sidewall slopes of the glass trench and the patterned PR were $54.00^{\circ}$ and $63.47^{\circ}$, respectively. The negative sidewall enables an embedment of a gold layer inside $0.7{\mu}m$ wide glass trenches. Gold residues on the trench edges were removed by the additional flood exposure with wet etching. The sidewall slopes of the patterned PR are related to the slopes of the glass trenches. Nano-scale bottom electrodes inside the glass trenches will be used in beam resonators operating at high resonant frequencies.

• 소성∙가공
• /
• 제15권9호
• /
• pp.667-672
• /
• 2006

Agglutination is one of the most commonly employed reactions in clinical diagnosis. In this paper, we have designed and fabricated nickel mold insert for injection molding of a microfluidic lab-on-a-chip for the purpose of the efficient detection of agglutination. In the presented microfluidic lab-on-a-chip, two inlets for sample blood and reagent, flow guiding microchannels, improved serpentine laminating micromixer(ISLM) and reaction microwells are fully integrated. The ISLM, recently developed by our group, can highly improve mixing of the sample blood and reagent in the microchannel, thereby enhancing reaction of agglutinogens and agglutinins. The reaction microwell was designed to contain large volume of about $25{\mu}l$ of the mixture of sample blood and reagent. The result of agglutination in the reaction microwell could be determined by means of the level of the light transmission. To achieve the cost-effectiveness, the microfluidic lab-on-a-chip was realized by the injection molding of COC(cyclic olefin copolymer) and thermal bonding of two injection molded COC substrates. To define microfeatures in the microfluidic lab-on-a-chip precisely, the nickel mold inserts of lab-on-a-chip for the injection molding were fabricated by combining the UV photolithography with a negative photoresist SU-8 and the nickel electroplating process. The microfluidic lab-on-a-chip developed in this study could be applied to various clinical diagnosis based on agglutination.

• 대한기계학회논문집A
• /
• 제40권8호
• /
• pp.731-736
• /
• 2016

본 연구에서는 의용생체공학에 널리 사용되는 미소바늘과 같은 3차원 고종횡비 미소구조물을 용이하게 제작할 수 있는 하이브리드 자외선 노광법에 대해 기술한다. 하이브리드 자외선 노광법은 기존에 사용되고 있는 경사노광, 회전노광 및 역노광을 혼합한 방법으로, 경사 및 회전노광은 경사진 축대칭 형상을 가지는 3차원 미소구조물의 제작이 가능하도록 하고 역노광은 자외선 노광공정 중 필연적으로 발생하는 하부기판에서의 자외선 반사를 최소화 시킨다. 자체 개발한 자외선 노광시스템과 SU-8 음성감광제를 이용하여 하이브리드 자외선 노광법의 다양한 공정조건이 최종 제작된 3차원 고종횡비 미소구조물 형상(종횡비, 선단의 곡률반경 등)에 미치는 효과를 확인한다. 또한 SU-8의 소프트 베이킹(soft baking) 조건과 미소구조물 선단 형상 사이의 관계에 대해서도 논의한다.

• 폴리머
• /
• 제28권6호
• /
• pp.494-501
• /
• 2004

시클로부탄-1,2,3,4-테트라카복실산 이무수물, 2-(메타크릴로일옥시)에틸-3,5-디아미노벤조에이트 및 1,3-비스(3-아미노프로필)-1,1,3,3-테트라메틸디실록산을 N-메틸-2-피롤리돈 하에서 용액 중합 반응시켜 알칼리 수용액에서 현상이 가능할 뿐만 아니라 가시광선 영역에서 우수한 광투과성을 보이는 신규 감광성 폴리이미드 전구체인 폴리암산 (PAA-0)을 제조하였다. 광개시제의 존재 하에서 노광 후 열경화된 폴리이미드 박막은 2.38 wt%의 테트라메틸암모니움 히드록사이드 수용액에 용해되지 않는 특성을 보였으며, 이를 이용하여 광에 의한 미세 화상 형성 연구를 수행하였다. 폴리이미드 전구체 박막의 광반응에 적합한 광개시제는 2, 2-디메톡시-2-페닐아세토페논임을 알 수 있었고, 최적 광량은 400∼600 mJ/$\textrm{cm}^2$의 범위에 있음이 확인되었다. 감광성 폴리이미드 전구체는 25$0^{\circ}C$의 온도에서 50분간 열경화시킴으로써 투명한 폴리이미드 박막으로 전환이 되었으며, 유기용제를 비롯한 포토레지스트 제거제에 대한 우수한 내용제성 및 가시광선영역에서의 우수한 광투과 특성을 나타내었다.