• The Journal of Sustainable Design and Educational Environment Research
• /
• v.2 no.1
• /
• pp.105-112
• /
• 2002

New buildings are to be needed for an aging society. But, there may be a solution on the multi-purpose & mixed-use existing facilities. Therefore this study is focused on verification of mixed-use school facilities's potentialities. If possible, I want to suggest some directions of renewal primary school planning. The results of this study are as follows : 1) It is important to make a policy for improving the educational environment, 2) Future buildings must be planned by the principles based on the lifelong learning, 3) Mixed-use building blocks need to be laid out by the concept of accessibility, 4) We can use existing primary school's areas as a elderly welfare facilities without any renovation and increasing areas.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.2
• /
• pp.123-132
• /
• 2008

The problems caused by new biological organisms in Ogasawara Island of Japan include : (1) loss of native species' habitats and extinction of native species due to the multiplication of invasive species; (2) reduction of native species and confusion in the food chain in result of invasive species' predation; (3) confusion in genes due to hybridization of new and native plants; and (4) destruction of ecosystem and erosion of earth due to rapid increase of invasive species. The natural ecosystem of preserved areas in Korea is constantly confused and destroyed by new animals and plants, but Korea does not has any solutions because new animals and plants rarely affect human lives. Invasive species are manually introduced by humans and are considered disasters caused by humans. Korea is in desperate need of campaigns as the general public does not understand the seriousness of the destruction and confusion of natural ecosystem caused by new biological organisms and their indirect/direct influences on humans. It is necessary to evaluate the biological characteristics, ecological influence, and harms of invasive species in preserved areas to establish a system to manage invasive species and plan the priority removal of species that are highly harmful and locally distributed. Manual removal and suppression of new biological organisms that cause problems is effective, but it takes cost, effort, and time. Therefore, we would need to research and develop the most efficient and effective techniques and measures to manage invasive species in our ecosystem.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.3 s.12
• /
• pp.29-33
• /
• 2005

As the integrated devices become more and more sophistcated, the diameter of wafers increased up to 300 mm and strict level of cleaning is necessary to remove the particulates on the surface of wafer. Therefore we need a new type of wet-station which can reduce DI water and chemical in the cleaning process. Moreover, it is important to control the temperature and the concentration of chemical in the wet-station. In the conventional chemical supply system, it is difficult not only to fit the mixing rate of chemicals in cleaning process, but also to fit the quantity and temperature. Thus, we propose a new chemicals supply system, which overcomes above problems by the analysis of fluid and thermal transfer on chemical supply system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1265-1268
• /
• 2005

Due to the increase of the need for reliable high density information storage devices, the demand for precise machining of the slider in HDD is rapidly growing. The present fabrication process of slider bears some serious problems such as low yield ratio in mass production, which is mainly caused by inefficient machining processes in shaping camber and crown on the slider. In order to increase slider yield ratio in HDD, a new systematic machining process is proposed and developed in this work. This new machining process includes the use of magnetorheological (MR) fluid, a smart polishing material generally used for ultra-fine surface finishing of micro structures. It is shown that the process proposed in this work enables to make camber and crown pattern in the scale of few tens of nanometers. Experiment results shows that the MR polishing can be also used for shaping process of micro structures.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.3
• /
• pp.237-242
• /
• 2019

In the hydrogen refueling station (HRS), it is need the pre-cooling system (PCS) to limit the inside temperature ($85^{\circ}C$) of the onboard thank (700 bar) and to charge the hydrogen at short time (within 3 minutes) to fuel cell electric vehicle (FCEV). From those safety reasons, the temperature of hydrogen gas must be controled $-33^{\circ}C$ to $-40^{\circ}C$ in PCS. The cooling test of the gaseous ($N_2$, He, $H_2$) was carried out using heat exchanger (pre-cooler) by indirect cooling and direct cooling method. It was confirmed that the temperature of hydrogen gas had below $-40^{\circ}C$ at below $-75^{\circ}C$ of chiller temperature in direct cooling.

• Korean Journal of Materials Research
• /
• v.18 no.3
• /
• pp.148-152
• /
• 2008

A new cost-effective atomic layer deposition (ALD) technique, known as Proximity-Scan ALD (PS-ALD) was developed and its benefits were demonstrated by depositing $Al_2O_3$ and $HfO_2$ thin films using TMA and TEMAHf, respectively, as precursors. The system is consisted of two separate injectors for precursors and reactants that are placed near a heated substrate at a proximity of less than 1 cm. The bell-shaped injector chamber separated but close to the substrate forms a local chamber, maintaining higher pressure compared to the rest of chamber. Therefore, a system configuration with a rotating substrate gives the typical sequential deposition process of ALD under a continuous source flow without the need for gas switching. As the pressure required for the deposition is achieved in a small local volume, the need for an expensive metal organic (MO) source is reduced by a factor of approximately 100 concerning the volume ratio of local to total chambers. Under an optimized deposition condition, the deposition rates of $Al_2O_3$ and $HfO_2$ were $1.3\;{\AA}/cycle$ and $0.75\;{\AA}/cycle$, respectively, with dielectric constants of 9.4 and 23. A relatively short cycle time ($5{\sim}10\;sec$) due to the lack of the time-consuming "purging and pumping" process and the capability of multi-wafer processing of the proposed technology offer a very high through-put in addition to a lower cost.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.459-463
• /
• 2000

Direct use of negative ions for modification of materials has opened new research such as charging-free ion implantation and new materials syntheses by pure kinetic bonding reactions. For these purposes, a new solid-state ce-sium ion source has been developed in the laboratory scale. In this paper, diamond like carbon(DLC) films were prepared on silicon wafer by a negative cesium ion gun. This system does not need any gas in the chamber; deposition occurs under high vacuum. The ion source has good control of the C- beam energy(from 80 to 150eV). The result of Raman spectrophotometer shows that the degree of diamond-like character in the films, $sp^3$ fraction, increased as ion beam energy increases. The nanoindentation hardness of the films also increases from 7 to 14 GPa as a function of beam energy. DLC films showed ultra-smooth surface(Ra~1$\AA$)and an impurity-free quality.

• 한국벤처창업학회:학술대회논문집
• /
• 2017.04a
• /
• pp.42-42
• /
• 2017

There are lots of specialized graduate schools such as law school, medical school, business school. These specialized graduate schools has been designed to train the special experts practically from 1990s in Korea. For all that, there are no specialized graduate schools supported by the Small and Medium Business Administration(SMBA). So we will research the establishment plan of SME(Small and Medium Enterprise) specialized school for the development of SMEs. Recently, the SMBA supports the 2 types of graduate school such as the entrepreneurship graduate school and consulting graduate school. However, it is clear that these 2 types of schools are yet insufficient in terms of efficiency and redundancy. As the representative specialized graduate schools are law school and MOT(Management of Technology) in Korea, we do the comparative study with law school and MOT school. Through the comparative study, we can find some implication for SME specialized graduate school. As a result, the SME school has to need the training system such as the special master's and doctor's degree, over 3 year course work, daytime class, many practical professors, specialized programs with industry like the MOT school. In conclusion, we suggest that : First, the SME specialized graduate school has to be designed for potential SME consultants. Second, the entrepreneurship graduate school and the consulting graduate school can be integrated into the SME specialized school easily. Third, the SME specialized graduate school can have new educational models.

• Journal of Intelligence and Information Systems
• /
• v.14 no.4
• /
• pp.201-216
• /
• 2008

Nowadays various new items are available, but limitation of searching effort makes it difficult for customers to search new items which they want to purchase. Therefore new item providers and customers need recommendation systems which recommend right items for right customers. In this research, we focus on the new item recommendation issue, and suggest preference boundary- based procedures which extend traditional content-based algorithm. We introduce the concept of preference boundary in a feature space to recommend new items. To find the preference boundary of a target customer, we suggest heuristic algorithms to find the centroid and the radius of preference boundary. To evaluate the performance of suggested procedures, we have conducted several experiments using real mobile transaction data and analyzed their results. Some discussions about our experimental results are also given with a further research area.

• Hwankyungkyoyuk
• /
• v.13 no.2
• /
• pp.51-62
• /
• 2000

This study examined the current status of school environmental education (EE) in Germany, and attempted to propose strategies to develop school EE in Korea. The study intended to accomplish the following goals: First, this study attempted to examine the developmental process of school EE in Germany. Second, exemplary cases of site-based experiential education in Germany are selected and analysed to develop pedagogical strategies in school EE in Korea. The strategies for development proposed in this study can be summarized as follows: First, the focus of EE should go beyond that of "solving or curing"environmental problems and pollutions, and need to be re-directed to pursue an "education for sustainable development", a new paradigm for future EE. Second, EE should increasingly integrate outdoor site-based, experiential programs into the currently classroom-based and knowledge-driven forms of education, not only to maximize its educational effect but also and knowledge-driven forms of education, not only to maximize its educational effect but also to coordinate the instruction of EE in the context of the educational reform agenda, currently undergoing since the late 1990s, in Korea. Third, teaching-learning materials for EE should be variously developed, and programs should be encouraged to serve local needs and circumstances for effective classroom practices, and criteria for standardization and professionalization should be sought in developing these programs. Fourth, it is recommended that the Ministry of Environment secure funds to facilitate the local school authorities at the municipal and provincial levels to operate a mobile environmental support system, equivalent to the function of the "Lumbricus"in Germany. Fifth, an external support network should be established among the support agencies for EE. Especially, a professional agency or institute to academically support school EE and a special planning committee for enhancing EE need to be established for resource and personal development. Parents′voluntary participation should also be encouraged to establish a tripartite network of "school-community-government" to support and facilitate school EE.