• Journal of the Korean Society of Costume
• /
• v.42
• /
• pp.163-172
• /
• 1999

The purpose of this study is to classify the types of torso of adult females using the tight fitting technique and pattern development figure. The subjects are 106 females of 19 to 24 years old. 59 different items are measured from body surface development and analyzed by factor analysis and cluster analysis. The results are as follows; 1. Eight somatotype factors are obtained through factor analysis and orthogonal rotation by the method of Varimax Factor 1 is the length of upper body factor 2 the length of lower body factor 3 the circumference and width of the back of upper body factor 4 the circumference and width of front torso factor 5 the dart type of the back of upper body factor 6 the size of the back neck factor 7 the type of the front shoulder and factor 8 the size of the back arm hole. 2. As a result of cluster analysis the somatotype of torso is classified into 5 types. Type 1 is normal in length circumference and width of upper body. Type 2 is shortest length circumference and width of torso. Type 3 is long in length circumference and width of torso. Type 4 is normal length and short in circumference and width especially short in bust circumference. Type 5 is longest in length circumference and width of torso.

• Korean Journal of Human Ecology
• /
• v.10 no.4
• /
• pp.379-390
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to comparative analysis of required measurements, two measurements of back length and bust girth are used in Proportional Drafting Method (Munhwa). In case of Compromise Drafting Methods are used across chest, across back, bust length, bust width, full length in front, across shoulder and shoulder length in addition to back length and bust girth. The type of Armstrong as a Short Measure Drafting Method uses 10 measurements for the drafting the bodice. 2. While Esmod block pattern arid Armstrong's block pattern are the lightest in full width and other widths. Rasara block pattern is the most ample. In Lee, Myung-hee's block pattern and Lee, Hyung-sook's block pattern, amounts of drooping are decided $3{\sim}4cm$, but drooping amounts of other block patterns are decided corresponding to real measurements. While cap height in Esmod and Armstrong's sleeve patterns are directly measured Armhole length of the block pattern, cap height of other sleeve patterns are used armhole depth and cap height length as well as armhole length. 3. When analyzing to indirect measurements, Esmod block pattern shows the least different between full length of block pattern and that of body form. Munhwa block pattern and Kim, Hyosook's block pattern are mostly same to body form back length. However all of the block patterns are sheller than body form length. In case of Suh, Wansuk's block pattern, across back and across chest are same size, but other block patterns show difference between across back and across chest. Most block patterns' neck width in front and bach bodice are almost same. Front neck width is generally bigger than back neck width in some cases.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.963-970
• /
• 2013

The purpose of this study was to develop torso pattern of underweight female in their 20s~30s by using Clo 3D virtual garment simulation system. The results were as follows; first, as a result of analyzing torso somatotype, underweight women showed lower average than average values of whole women in their twenties and thirties in the items such as length, width, circumference, thickness except for height. Second, by using 3D virtual garment simulation, new torso pattern considered underweight female was development. The basic numerical formula were as follows ; bust girth B/2+3.5, armhole depth B/4+0.5, front waist girth W/4+0.5+0.7, back waist girth W/4+0.5-0.7, front hip girth H/4+1+0.5, back hip girth H/4+1-0.5, chest width B/6+3.1, back width B/6+4.5, neck width B/12+0.2 and neck depth B/12+1.7. Third, by reducing hollowed amount of front, back, and side line, and hollowed amount of back center line, the reduced quantity was included to darts amount. Number of dart was adjusted to two pieces so that darts amount was equally distributed to two darts. Forth, according to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern was appropriate for the underweight women. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• The Korean Journal of Ceramics
• /
• v.5 no.2
• /
• pp.110-114
• /
• 1999

NOx sensing properties of $Ba_2WO_5$ were investigated by varying the sintering temperature in an effort to study the effects of the neck-width on gas sensitivity. $Ba_2WO_5$ sintered at $800^{\circ}C$, which exhibits neck-controlled conduction provides highest sensitivity of 47 and 29 at $500^{\circ}C$ to NO and $NO_2$, respectively. The samples sintered beyond $800^{\circ}C$ show sintering temperature-independent gas sensitivity. This may be because the grain boundary control is dominant at lower sintering temperatures and open neck control is dominant at higher sintering temperatures than $800{\circ}C$. The NOx sensing mechanism of $Ba_2WO_5$ was briefly discussed.

• Korean Journal of Bronchoesophagology
• /
• v.16 no.2
• /
• pp.121-125
• /
• 2010

Background: Penetrating neck injuries are potentially dangerous and require emergency management because of the presence of vital structures in the neck. The risk of airway, vascular, neurological, and pharyngoesophageal injuries leads to many difficult diagnostic decisions. The purpose of this retrospective study is to evaluate our experience with management of penetrating neck injuries, and to assess treatment outcome. Material and Method: Forty-two consecutive patients were identified (26 patients from Korea university Ansan hospital, 16 patients from Guro hospital) as having penetrating neck injuries from 2003 to 2009. With review of medical records, variables were collected and evaluated including the location of injury, mechanism of injury, number of significant injuries, diagnostic modalities, duration of hospital stay and outcome. Results: The location of injury was zone I (lower neck) in 13 cases (31%), zone II (midportion of the neck) in 22 (52%), and zone III (upper neck) in 7 (17%). Injuries were caused by stab wounds in 23 patients, penetrating foreign bodies in 12. Among 35 patients who had deep injuries that violated the platysma, significant injuries, including major vascular (20), trachea (5) Pharyngoesophageal injuries (5) were identified in 24 patients. The mean hospital stay was 9.5 days. Conclusion: The penetrating trauma in the neck may show various degrees of severity. However, Cervical penetrating injury should not be underestimated in spite of the minimal width of the lesion.

• The Journal of the Korean dental association
• /
• v.55 no.11
• /
• pp.766-776
• /
• 2017

This clinical study was conducted to evaluate the clinical effects of a concave neck of external connection type implant fixture designed for platform switching on the peri-implant tissue responses. Two types of implants with different neck designs were implanted in 20 patients. For the experimental group, the bioseal(BS) implant fixtures with 's' shaped concave profile on the neck were used, and non-bioseal(NBS) implant fixtures with a straight profile on the neck were used as control(Total of 40 implants, NBS: n = 19, BS: n=21). During the one-year period after implant placement, implant survival rate, marginal bone resorption, bleeding, plaque, and complications were evaluated. The survival rate of NBS and BS group was 94.74% and 90.48%, respectively. There was no significant difference on marginal bone resorption, bleeding and plaque between the two groups (P>.05). Within the limits of the present study, implants with a concave neck design showed similar clinical results to implants with a straight neck design on the peri-implant tissue responses. Longitudinal clinical studies are necessary to confirm more effective clinical results.

• Journal of Sasang Constitutional Medicine
• /
• v.18 no.1
• /
• pp.54-61
• /
• 2006

1. Objectives The body shape is an important standard for the classification of Sasang Constitutions. Using physical measure­ments and statistical analysis we can understand it's characteristic objectively. 2. Methods In this study, we have measured body circumferences and widths of 562 patients who were treated with Sasang Constitutional medicine. Their anthropometric data were transformed into the ratio based on Sasang Constitutional medicine. 3. Results (1) Taeyangin female's ratio of iliac width to chest width was most large, but Taeyangin male's was most small. (2) Soyangin's ratios of axillary width to waist width and chest width to iliac width were large. that is, their uppor body was large and lower body was small. (3) Taeumin's ratios of head and neck circumference to body circumference were small. the ratio of waist width to axillary width was most large. (4) Soeumin's ratio of head circumference to waist circumference was most large. and their uppor and lower body was larger than middle body. (5) Irrespective of Sasang Constitutions, male's ratios of axillary width to waist width and chest width to iliac width were larger than female's. 4. Conclusions From the above results, when we classify Sasang Constitutions using physical measurements we must consider gender differences and characteristics of Sasang Constitutional body shape.

• Korea-Australia Rheology Journal
• /
• v.12 no.2
• /
• pp.107-117
• /
• 2000

Prediction of the product shape in sheet casting process is performed from the numerical simulation. A three-dimensional finite element method is used to investigate the flow behavior and to examine the effects of processing conditions on the sheet produced. Effects of inertia, gravity, surface tension and non-Newtonian viscosity on the thickness profile of the sheet are considered since the edge bead and the flow patterns in the chill roll region have great influence on the quality of the products. In the numerical simulation with free surface flows, the spine method is adopted to update the free surface, and the force-free boundary condition is imposed along the take-up plane to avoid severe singularity problems existing at the take-up plane. From the numerical results of steady isothermal flows of a generalized Newtonian fluid, it is shown that the draw ratio plays a major role in predicting the shape of the final sheet produced and the surface tension has considerable effect on the bead thickness ratio and the bead width fraction, while shear-thinning and/or tension-thickening viscosity affect the degree of neck-in.

• Journal of the Korean Home Economics Association
• /
• v.34 no.3
• /
• pp.219-232
• /
• 1996

This study is intended to find changing of upper body shape according to the increase of age of elderly women, to extract the factors which form the upper body shapes and to classify the upper body shapes and grasp the characteristics of each body type. The subject were 225 elderly women aged 55-79 years old. Data were analyzed by the multivariate method, especially factor and cluster analysis. The results are as follows: 1. The items of stature, weight and width and circumference of upper body decreased according to the increase of age. And, in the length items except the side neck point - the nipple point length decreased significantly. There were significant difference of upper body shape between age groups according to each group. 2. The shape of elderly women's upper body is determined the main 6 factors(the obesity of upper body, the shape of shoulder, the length of back side of upper body, the length of front side of upper body and the size of vertical direction between stature and arm and front neck width). 3. Elderly women have 4 types of upper body shapes, which are distributed evenly. The body type of Elderly woman changes from long and fat type to small and slim, type according to the increase of age.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.521-524
• /
• 2003

In this paper, we propose a face region extraction algorithm using color information and projection. After the extraction of face candidate image using adaptive color information, we project it into vertical direction to estimate the width of the face. Then the redundant parts of the face are efficiently removed by using the estimated face width. And the width information of the face is used at the horizontal projection step to extract the height of the face, and non-face region such as the neck and some background regions, which are represented as the similar skin color, effectively eliminated. From the experiment results for the various images, the proposed algorithm shows more accurate results than the conventional algorithm.