• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.81-85
• /
• 2003

PU block polymers are constituted by sequences of constitutional units CU which are : a diisocyanate T, a polyol or a polyamine V, an extensor E .Due to the CU different solubility parameters ,hard and soft micro domains are formed;they can aggregate into different phases. A linear PU can be described by two parameters R=T/N and $R_{E}$=(R-1)V/E.A stoichiometric model is proposed which gives the general formula of all the possible PU: X((TV)$_{k}$(TE)$_{n}$)$_{m}$X , where k and m can be calculated from the experimental molecular weights respectively of pre polymer and polymer and n= R-1.Physical properties depend on PU composition and on nature of CU. I.R. analysis is useful for discovering the hydrogen bonds location : DSC gives informations on the presence of the different phases .PALS analysis shows that nano cavities become tighter on increasing n. A series of particular Pus ,obtained from :TDI, a low molecular weight polyol, a cyclic extensor, at different R and RE was prepared and analysed. These PU are amorphous, monophasic and appear to be good candidates for membranes.nes.nes.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.5
• /
• pp.540-546
• /
• 2016

Besides high-efficient photovoltaics based on silicon, polymers, dye-sensitization and hybrid perovskite materials, biomimetic solar cells inspired by a leaf in nature has also been actively studied. As one example, a hydrogel based photovoltaics (HGPV) is a low-cost, environmentally friendly device and requires easy fabrication process. In this paper, the effect of hydroquinone additive on the performance of the HGPV is discussed. The photocurrent increases ~14 times upon the addition of hydroquinone into the agarose hydrogel medium. The photocurrent increase is maximum at the optimum dye concentration, while the photovoltage is barely affected by the dye concentration. The effect of the agarose content in the hydrogel and the types of dyes on the photocurrent is also investigated. Finally, it is shown that the photovoltaic performance of HGPV with hydroquinone can be drastically improved when $TiO_2$ film is deposited on the anode electrode.

• Textile Coloration and Finishing
• /
• v.8 no.5
• /
• pp.68-75
• /
• 1996

Even if fibers are practically identical with respect to chemical composition and denier, the dyeabilities are freqently a little different in an industrial processing. It is difficult to interpret the numerical values of dye diffusion coefficients from a dye solution into fibers. The main reasons are the multicomponent nature of the diffusion process and the inhomogeneities of the substrate, so-called, various kinds of ordered and disordered regions of polymers, void and pores. The equilibrium dye adsorptions and dyeing rates of a disperse dye into the several PET fibers having the same denier were determined at various temperatures. The dyeability of examined samples was divided into two groups, that is, lower dye adsorption fiber and higher ones at the lower temperatures. This result was discussed with the degree of crystallinity, DSC diagram, X-ray diffractometry and Porosimetry of the PET fiber, and an appropriate model for fine structure of PET fiber was proposed.

• Membrane Journal
• /
• v.34 no.3
• /
• pp.192-203
• /
• 2024

The advancement of commercially viable gas separation membranes plays a pivotal role in improving CO₂ separation efficiency. High-molecular-weight poly(ethylene oxide) (high-Mw PEO) emerges as a promising option due to its high CO₂ solubility, affordability, and robust mechanical attributes. However, the crystalline nature of high-Mw PEO hinders its application in gas separation membranes. This study proposes a straightforward blending approach by incorporating various polymeric additives into high-Mw PEO to address this challenge. Four commercially available, water-soluble polymers, i.e. poly(ethylene glycol) (PEG), poly(propylene glycol) (PPG), poly(acrylic acid) (PAA), and poly(vinyl pyrrolidone) (PVP) are examined as additives to enhance membrane performance by improving miscibility and reducing PEO crystallinity. Contrary to expectations, PEG and PPG fail to inhibit the crystalline structure of PEO and result in membrane flaws. Conversely, PAA and PVP demonstrate greater success in altering the crystal structure of PEO, yielding defect-free membranes. A thorough investigation delves into the correlation between changes in the crystalline structure of high-Mw PEO blend membranes and their gas separation performance. Drawing from our findings and previously documented outcomes, we offer insights into designing and selecting additive polymers for high-Mw PEO, aiming at the creation of cost-effective, commercially viable CO₂ separation membranes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.2
• /
• pp.82-90
• /
• 2004

This study was conducted to evaluate in situ soil flushing and coagulation for naphtalenes-contaminated soil remediation. Mixed-surfactant of 1% POE12 and 1% SDS (1 : 1 by volume basis) was used as a flushing solution. When 5 pore volumes of mixed -surfactant were added to soil column, the flushing efficiencies of 2-methylnaphtalene and 1,5-dimethylnaphtalene with about 1,500 mg/kg(dry soil) were approximately 80% and 60% respectively. In adding 13 pore volumes of mixed-surfactant, the flushing efficiencies of 2-methylnaphtalene and 1,5-dimethylnaphtalene were 90% and 82%. However, considering in situ soil flushing with distilled water, about 42% and 71% were flushed for 2-methylnaphtalene and 1,5-dimethylnaphtalene by surfactant-only. For about 10,000 mg/kg(dry soil) diesel-contaminated soil, 40% and 70% of TPH were flushed-out in 5 pore volumes and 13 pore volumes addition. However, for naphtalenes in diesel TPH, 90% of flushing efficiency was discovered in adding only 5 pore volumes of flushing solution. There was not discovered significant difference among coagulation efficiencies of 6 kinds of polymers, and the coagulation efficiencies were near 50%.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.217-222
• /
• 2006

Polyimides have been investigated extensively and used widely over the past three decades because of their high performance properties such as excellent thermal, mechanical, and electrical properties. Polyimides are difficult to be processed because of the aromatic moieties, imide group, and insoluble nature in most organic solvents. The soluble polyimides were synthesized from 2,2,-bis(3-amino-4-hydroxyphenyl) hexafluoropropane (BAPAF) and 3,3,-diamino-4,4-dihydroxybyphenyl (HAB) as aromatic diamines and 4,4-(hexafluoroisopropylidene)diphthalic dianhydride (6FDA), pyromellitic dianhydride (PMDA), 4,4-oxydiphthalic dianhydride (OPDA), 3,3,4,4-benzophenone tetracarboxylic dianhydride (BTDA) and 3,3,4,4-diphenylsulfone tetracarboxylic dianhydride (DSDA) as aromatic dianhydrides. The polyimides were characterized by NMR, FR-IR, TGA and the dielectric constant of the obtained polyimides was calculated from storage of electro-capacity. A novel photosensitive polyimide was synthesized by the reaction of polyimide, containing hydroxyl group and methacryloyl chloride using triethylamine. The good micro-pattern was obtained with photosensitive polyimide from the photolithographic technique.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.334-339
• /
• 2008

Recently electro spinning is a widely used simple technique to prepared micro- to nanometer-sized fiber of various polymers. In general, a normal multiple-nozzle electro spinning system has been difficult to achieve high production-rate fabricating micro/nanofibers due to the interference of electric field between individual nozzles in the process. To reduce the interference effect of electric field between nozzles, we developed a multi-nozzle electrospinning system supplemented with auxiliary electrodes. Poly($\varepsilon$-carprolactone)(PCL), which has good mechanical property and biocompatibility, was electrospun by the multi-nozzle electro spinning system. Electrospinnability, product rate, and size uniformity of spun fibers for the system with and without auxiliary electrodes were characterized. As a result, the multi-nozzle electrospinning system supplemented with auxiliary electrodes provides excellently stable processability and showed high mass productivity of PCL-nanofibers relative to a normal multi-nozzle electro spinning system.

• Computers and Concrete
• /
• v.8 no.2
• /
• pp.193-206
• /
• 2011

The use of Carbon Fiber Reinforced Polymers (CFRP) to strengthen reinforced concrete beams under bending and shear has gained rapid growth in recent years. The performance of shear strengthened beams with externally bonded CFRP laminate or fabric strips is raising many concerns when the beam is loaded under cyclic loading. Such concerns warrant experimental, analytical and numerical investigation of such beams under cyclic loading. To date, limited investigations have been carried out to address this concern. This paper presents a numerical investigation by developing a nonlinear finite element (FE) model to study the response of a cantilever reinforced concrete T-beam strengthened in shear with side bonded CFRP fabric strips and subjected to cyclic loading. A detailed 3D nonlinear finite element model that takes into account the orthotropic nature of the polymer's fibers is developed. In order to simulate the bond between the CFRP sheets and concrete, a layer having the material properties of the adhesive epoxy resin is introduced in the model as an interface between the CFRP sheets and concrete surface. Appropriate numerical modeling strategies were used and the response envelope and the load-displacement hysteresis loops of the FE model were compared with the experimental response at all stages of the cyclic loading. It is observed that the responses of the FE beam model are in good agreement with those of the experimental test. A parametric study was conducted using the validated FE model to investigate the effect of spacing between CFRP sheets, number of CFRP layers, and fiber orientation on the overall performance of the T-beam. It is concluded that successful FE modeling provides a practical and economical tool to investigate the behavior of such strengthened beams when subjected to cyclic loading.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.547-552
• /
• 2010

Biodegradable polymers have gained enormous attentions in the pharmaceutical and biomedical applications, especially in drug delivery. In this work, we report the synthesis and characteristics of high molecular weight polyoxalate with ~75000 Da. Hydrolytic degradation kinetics and degradation products were characterized by nuclear magnetic resonance and gel permeation chromatography. Polyoxalate is a semicrystalline and thermally stable polymer with a glass transition temperature of ${\sim}35^{\circ}C$, which is suitable for drug delivery applications. The hydrophobic nature of polyoxalate allows it to be formulated into nanoparticles and encapsulate drugs using a conventional oil-in-water emulsion/solvent displacement method. Polyoxalate nanoparticles also exhibited excellent cytotoxicity profiles. It can be suggested that polyoxalate has great potential for numerous biomedical and pharmaceutical applications.

• Journal of Nutrition and Health
• /
• v.35 no.9
• /
• pp.912-918
• /
• 2002

In nature, two different types of fructose polymers (fructan) are generally found in dietary fibers; these are the fructose homopolymers levan, which is of high molecular weight and is $\beta$-(2,6)-linked, and inulin, which is of low molecular weight and is $\beta$-(2,1)-linked. The effects of levan and inulin on the intestinal physiology of rats were compared. Sprague Dawley rats were fed one of three diets for 3 weeks: a control diet, a basal diet containing 7% of levan, and a basal diet containing 7% of inulin. Cecal enlargement, together with the lowering of cecal pH, occurred in rats fed on the levan and inulin diets (p < 0.05). The levan and inulin diets resulted in a two-fold increase in the amount of short-chain fatty acids in the cecum, when compared to the control diet. The number of total microbes and of lactic acid-producing bacteria in the feces were higher in rats fed the fructan diets than those in rats fed control diet (p < 0.05). The levan diet also significantly increased the cecal $\alpha$-galactosidase activity by 3.8-fold, when compared to the control diet, indicating that levan stimulated the growth of Bifidobacteria in the cecum. These results show that the intake of levan and inulin stimulated the growth of lactic acid-producing bacteria in the cecum and thereby improved intestinal conditions in rats. (Korean J Nutrition 35(9) : 912~918,2002)