In order to prevent decay, distortion, bending, twist on wood products such as wooden furnitures, variety of coating materials were developed and used so far. The coating materials for wood finishing can be synthesized by natural resource or petroleum. However, these coating materials can cause contamination of indoor air quality due to emission of volatile organic compounds (VOCs). In this study, commercialized coating materials for wood finishing such as varnish, coat, and stain were evaluated on emission characteristics of VOCs. Among the varnish, eco-friendly products had about 15~46% lower TVOC emission ($1,042{\mu}g/m^2h{\sim}3,257{\mu}g/m^2h$, respectively, than typical product ($7,100{\mu}g/m^2h$). Natural resource based coating material showed lowest TVOC emission level. However, one of natural resource based waterborne stain showed higher TVOC emission level because waterborne stain already contained higher amount of natural VOC. Oil-based stain might not be suitable for indoor use on interior wall and furniture due to exceed amount of TVOC. Based on results, natural resource based coat or waterborne stain are recommenced to use on wood products.
In order to reconstruct the traditional technology of Korean golden varnish coatings, this study was carried out to separate and determine some main coloring components of the exudates of D. morbifera and its traditionally refined golden varnishes using a process of solvent extractions, chromatographies and spectrometries. The results obtained are as follows: 1. The exudate and its traditional-refined golden varnishes appear to have a kind of natural polyacetylenes because it has some triple bond peaks in FT-IR spectrometry. 2. Some yellowing spots of the polar-solvent extrats from the exudates and refined varnishes separated on TLC appeared under natural drying condition, but those of non-polar solvent extract such as hexane did not. 3. A traditional refining method for reconstructing a Korea golden varnishes was thought to be better than solvent separation because the former had higher triple-bond peaks than the latter in FT-IR spectrometry. 4. One of main conponents in the hexane-extracts of the traditional-refined varnishes and the exudates had the same molcular weighr of 204, but the fragmentation patterns was a little different between the exudate and the refined. in LC-MS soectrometry.
This study investigated the hygroscopicity and UV deterioration characteristics of 3 domestic and 4 imported woods using natural oil, stain, and varnish paints. In terms of hygroscopicity, it was found that the hygroscopicity of the painted wood was lower than that of the unpainted wood, and that as the number of coatings increased, the hygroscopicity decreased. In terms of anti-absorption, oil-based chemical paints showed higher resistance than water-based paints, and natural oils showed results comparable to oil-based paints. As for the UV deterioration, the amount of color change of the painted wood was lower than that of the unpainted wood, and there was no significant difference according to the number of times of painting. The amount of color change was found to be low in oil-based paints and hardwoods. Through this study, we confirmed effective moisture blocking and small color changes during painting using paints, and it is believed that wood can be protected from internal and external defects through selective and efficient painting based on data for excellent painting performance.
The purpose of this study was to compare the retention and fitness of crown treated with various desensitizing agents on natural teeth. Varnish, dentin primer, bonding agent and potassium oxalate treated groups and control group with no treatment were used. The retention test was executed with the Instron test machine(Instron Co.,U.S.A.) on 24 hours after cementation with zinc phosphate cement. After retention test, the teeth and crowns were washed and recemented. The cemented crowns were embedded in clear resin and sectioned with a diamond saw. The occlusal and marginal fitnesses, were measured indirectly with a stereomicroscopic photographs. The result of this study were obtained as follows : 1. The retention of control group was higher than any other desensitizing agent treated group. 2. The differences of retention among varnish, dentin primer, bonding agent and potassium oxalate treated groups were not statistically significant. 3. There were no statistically significant difference in fitness at occlusal surface and margin among control, varnish, dentin primer, bonding agent and potassium oxalate treated groups. According to these results, desensitizing agents used to protect the pulp from irritation of luting agents may adversely affect the retention of castings. Therefore, desensitizing agents should be used in limited areas carefully.
The shade of restorative materials is very important for successful restoration esthetically harmonized with the natural tooth. The purpose of this study was to evaluate the color stability and the opacity change of conventional chemical setting and visible light curing glass-ionomer cements for restorative esthetic filling. Specimens of each brand (GC Fuji II and Fuji II LC) were uniformly prepared and divided into three groups: In group l(control group), the specimens received no surface treatment; in group 2, the specimens were coated with varnish and the excess gently blown off; and in group 3. the specimens were coated with light-cured bonding resin and irradiated by a visible light curing unit for 20 seconds on both sides. All specimens were stored in distilled water at $37^{\circ}C$ and checked after for 24 hours. 2 months. 4 months, 6 months. and 8 months. The color characteristics($L^*,\;a^*,\;b^*$) and the opacity(Y%) of all the samples were measured by a spectrocolorimeter and the total color differences(${\Delta}E^*$) and opacity changes(${\Delta}Y%$) were computed. The following results were obtained : 1. The total tolor differences in all groups increased with time. 2. The total color differences of the LC groups after immersion for 8 months in distilled water at $37^{\circ}C$ were lower than those of GC groups(p<0.01), and the total color differences of the varnish or the light-cured bonding resin coated groups were lower than those of the control group with glass-ionomer cements which had no surface treatment(p<0.01). 3. In all groups the translucency decreased with time. 4. In the control group and the varnish coating group. the opacity changes of the GC groups were lower than those of the LC groups(p<0.01) and in the light-cured bonding resin coated group, there was no significant difference between the GC group and the LC group. 5. The opacity changes of the varnish or the light-cured bonding resin coated groups were lower than those of the control group(p<0.01). These results suggest that color change and opacity of conventional chemical setting and light cured glass-ionomer cement were increased with time, and the color changes and the opacity changes of a control group after immersion for 8 months in distilled water at $37^{\circ}C$ were greater than those of the varnish or the light-cured bonding resin coated groups.
In previous study, volatile organic compounds (VOCs) emission characteristics were highly affected by coating materials for wood finishing. Natural based coating materials showed that about 15~46% lower TVOC emission than typical products. In this study, long-term changes of VOCs emission characteristics from pine panel with three types of coating treatments were determined. Non-treated pine panel emitted $604.7{\mu}g/m^2{\cdot}h$ of TVOC that contained 66% of NVOC ($399.7{\mu}g/m^2{\cdot}h$) at 0 month. After 10 month, TVOC reduced 88% and 93% reduction on NVOC was observed. Natural oil and waterborne stain treated pine panel showed 61% and 77% lower TVOC, respectively, than non-treated pine panel. However, TVOC from finished pine panels showed higher TVOC emission than non-treated pine panel. All samples satisfied the VOC emission regulation (below $4,000{\mu}g/m^2{\cdot}h$) by Korean Ministry of Environment. Toluene emission regulation (below $80{\mu}g/m^2{\cdot}h$) was passed on all sample without varnish treated pine panel at 0 month. According to HB qualification standard for construction materials by Korea Air Cleaning Association (KACA), wood is not qualified to get the best tag due to high TVOC emission. At the 10 months, only non-treated pine panel could get the best tag of HB from KACA.
황칠나무 천연분포지에서 미생물의 감염으로 황칠의 분비가 촉진되는 것이 발견되었다. 황칠이 다량 분비되는 황칠나무의 상처 조직을 채취하여 배양한 결과 Sb1, Sb2, Sb3, Sb4의 4개의 균주가 분리되었으며, 황칠 분비 촉진에 관여하는 균주는 Sb3, Sb4의 2개의 균주였고 그중 Sb4 균주가 가장 우수한 균주로 선발되었다. Sb4 균주를 황칠나무에 접종한 결과 일반적인 칠액 채취 방법인 일(一)형처리 보다 흉고직경에 따라 3.4~7.7 배의 황칠 분비가 촉진되었다. Sb4 균주의 특성은 색깔이 회백색이고 균사가 구름모양의 둥근막을 형성하여 돌기를 이루며 생장하고 생장에 대한 온도의 영향은 $20^{\circ}C$ 이하에서는 거의 생장이 되지 않았고 $40^{\circ}C$ 이상에서는 생장이 급격히 떨어졌으며, 생장 최적 온도는 $30{\sim}35^{\circ}C$이었다. 생장 최적 pH는 6.5~7.0으로 나타났고 pH 5 이하와 pH 9 이상에서는 거의 생장하지 못하였다.
한반도 남부 일대에서 자생하는 황칠나무(Dendropanax morbifera Lev.) 수액으로부터 추출한 천연 도료인 황칠도료(Korean Dendropanax lacquer)는 예로부터 귀중한 예술품이나 투구, 화살, 활 등의 전쟁도구를 찬란한 황금색으로 도장하는데 사용되어 왔다. 경화 후 황금색의 투명한 도막을 형성하여 우수한 색상특성을 지니고 있을 뿐만 아니라 내후성, 내수성, 내식성 등이 우수하여, 보호도장으로써도 훌륭한 가치를 지니고 있다. 그러나 이러한 많은 장점에도 불구하고, 현대적인 여러 적용분야에 사용되지 못하고 있는 이유는 황칠도료의 생산량이 적고, 이로 인하여 가격이 매우 고가이고, 장시간의 경화시간이 소요되는 문제도 큰 원인으로 작용하고 있다. 한편 황칠 내에 광중합이 가능한 conjugated diene을 포함한 모노머가 있으며, 이러한 모노머는 일광 조사 조건등에 의하여 짧은 시간에 단단하고 황금색을 띠는 도막을 형성할 수 있음이 보고된 바가 있다. 따라서 본 연구에 서는 전통적인 황칠도료의 경화방법을 개선하고 경화속도를 촉진하기 위하여, 열개시제를 도입하여 열경화를 촉진하는 방법과 열개시제 및 광개시제를 동시에 도입하고 이중경화(dual curing)에 의해서 경화속도를 촉진하고자 하였다. 이러한 경화 속도 및 경화 거동은 적외선분광분석기(FT-IR)을 이용하여 -C=C- 이중결합 특성피크의 변화를 관찰하거나, 진자경도계(pendulum hardness tester)를 이용하여 표면 경도의 변화를 관찰함으로써 평가하였다. 또한 강체진자물성측정기(RPT)에 spot UV curing 장비를 도입하여 이중경화에 의한 경화 속도 진을 평가하였다. 본 연구의 결과 열개시제에 의하여 열경화가 촉진될 수 있을 뿐만 아니라, 이중경화에 의하여 경화속도를 향상시킬 수 있음을 확인하였다. 또한 이러한 황칠도료 경화 속도 촉진 방법을 활용하여 전통적인 역에만 사용되어온 황칠도료를 현대적인 여러 적용분야에도 확대하여 사용할 수 있는 가능성을 제시하였다.
The relationship between acoustic property and coating hardness of musical instruments was investigated using a sound level meter and a pendulum hardness tester. Urethane topcoat, oil stain, natural oil varnish, and UV-curable epoxy acrylate coatings were applied on four different substrates: Paulownia coreana, Pinus koraiensis, Castanea crenata var. dulcis and Pinus densiflora. The influence of the coating type on the acoustic properties was stronger than that of the substrate. In the case of an oil stain formed with tacky coating layer, the sound pressure level (SPL) and surface hardness decreased with increasing of coating thickness. In the other coatings, SPL decreased and hardness increased as the coating layer thickened. However, SPL began to increase again at coating thickness above $100{\mu}m$.
본 연구는 젤라틴과 메틸셀룰로오스를 기저재로 한 불소겔을 제작하고 이들의 높은 점조도와 표면에 흡착하는 능력이 치면에 불소를 오랜 시간 저류시켜 법랑질 탈회를 효과적으로 억제할 수 있는지 살펴보고자 시행되었다소의 전치로 시편 80개를 제작하였으며, (1) APF gel (2) $CavityShield^{TM}$, (3) Gelatin F gel (4) Methyl cellulose F gel 이렇게 4개의 군으로 분류하였다. 모든 시편을 인공우식용액에 72시간동안 보관하여 법랑질을 탈회시킨 후, 표면미세경도 측정법과 편광 현미경하에서 병소의 탈회 깊이를 측정하는 두 가지 방법을 사용하여 탈회정도를 측정하였다. 연구결과는 다음과 같다. 1) 불소를 처리한 experimental side와 처리하지 않은 control side간 미세경도의 차이는 APF를 적용한 제1군에서 71.82(VHN)로 가장 작은 것으로 나타났다(p<0.05). 2) $CavityShield^{TM}$를 도포한 제2군에서 148.24(VHN)로 가장 큰 차이를 보여 불소바니쉬의 탈회억제효과가 가장 큰 것으로 나타났다(p<0.05). 3) Gelatin과 methyl cellulose F gel을 도포한 3군과 4군에서 control side와 experimental side간 미세경도의 차이는 1군보다는 높고 2군보다는 낮았으나 3군과 4군간에 유의한 차이는 없었다(p>0.05). 4) 인공탈회병소의 깊이를 측정한 결과 APF를 처리한 제1군에서 control side와 experimental side간 병소의 깊이차이는 $16.69\;{\mu}m$로 가장 적게 나타났다(p<0.05). 5) 2,3,4군 에서는 병소깊이 측정을 통해 탈회억제효과가 APF군에 비해 우수하게 나타났으나(p<0.05) 각 군 간에 차이는 검증되지 않았다(p>0.05). 이상의 결과를 종합하여 보면 실험적으로 제조된 두 가지 불소겔은 APF gel에 비해 법랑질 탈회 억제효과가 우수하다고할 수 있으며 이는 APF gel에 비해 gelatin이나 methyl cellulose 의 높은 점조도가 불소를 더 장시간 치면에 접촉시킨 것으로 생각된다. 현재 가장 우수한 치면 잔류시간을 보이는 것으로 인정되는 불소바니쉬와 비교하여도 이들의 효과가 크게 떨어지지 않는 것을 알 수 있었으며 이는 향후 천연고분자 화합물을 이용한 다양한 불소제제의 개발 가능성을 보여주는 것이라 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.