To study the carrying capacity behavior of pile, dynamic pile testis and static load tests were carried out on two instrumented piles during and some time after pile driving. Cone Penetration Test( CPT) and Standard Penetration Test(SPT) were also performed at the test site before pile tests to investigate the relationship between unit skin friction of piles and cone tip resistance values and SPT N values. Total static capacity of pile reached the ultimate stage at the pile head settlement of about 0.055D (D : Pile diameter), at which skin friction of Pile already Passed the maximum value, but the end bearing was still increasing with the pile head settlement. The carrying capacity of pile increased in the form of natural logarithmic function with the time after pile driving. The increase in skin friction with time was very substantial the increase in skin friction 40 days after pile driving was 4.6 times of that determined during pile driving. The contribution of skin friction to the total capacity twas insignificant in the beginning, but became substantial 40 days after pile driving. This implies that the tested pile initially responded as an end bearing pile and later behaved as a friction pile. It was also noted that unit skin friction of pile might be ielated to cone tip resistance values(q.) and SPT N values, though the coefficient of this relationship might differ from one soil group to another and was somewhat greater than the value used in the design practice of Korea.
The purpose of this study was to examine the influence of land use change in the forest catchment on sedimentation rate at the outlets of rivers in Kushiro Mire that have been impacted by forest clearing, agricultural activity and river regulation. We analysed Caesium-137(Cs-137) concentration in sediment cores, and we estimated sedimentation rates and Cs-137 inventories over the last 50 years. Cs-137 from atomic bomb testing first entered the environment in 1954 which provides easily identifiable chronological markers in the sediment. Because Cs-137 is strongly absorbed into sediment particles, its redistribution occurs in association with sedimentary particles. Since the 1950s, the forest catchment areas draining into the mire have been developed intensively from forest areas to agricultural lands. The sediment accumulations at the outlets of rivers after 1954 ranged from 36 to 148 cm. The Cs-137 inventory is significantly greater than the reference sites which reflected natural accumulation conditions because sediment containing Cs-137 was carried from catchments into the outlets of the rivers. In addition, the Cs-137 inventory was correlated with the sedimentation rate. However, the Cs-137 inventories in Kuchoro and Kushiro river profiles were slowly increased with the sedimentation rates. This is because the sediment originating from scoured areas such as streambeds and banks contains a low level of Cs-137 concentration.
Journal of the Korea Academia-Industrial cooperation Society
/
v.21
no.10
/
pp.317-324
/
2020
Combined cycle power plants (CCPP) that use natural gas as fuel are easier to start and stop, and have lower pollutant emissions, so their share of domestic power generation facilities is steadily increasing. However, CCPP have a high concentration of nitrogen dioxide (NO2) emission in the initial start-up and low-load operation region, which causes yellow plume and civil complaints. As a control technology, the yellow plume reduction system was developed and operated from the mid-2000s. However, this technology was unable to control the phenomenon due to insufficient preheating of the vaporization system for 10 to 20 minutes of the initial start-up. In this study, CFD analysis and demonstration tests were performed to derive a control technology by injecting a reducing agent directly into the gas turbine exhaust duct. CFD analysis was performed by classifying into 5 cases according to the exhaust gas condition. The RMS values of all cases were less than 15%, showing a good mixing. Based on this, the installation and testing of the demonstration facilities facilitated complete control of the yellow plume phenomenon in the initial start-up.
Objectives : This is the study of the application as the ingredients of cosmetics through the examination of the function for physiological activity of Chestnut inner shell. Methods : Chestnut inner shell, which had been extracted, concentrated, and freeze drying with water and ethanol, have been used for the experiment. The effects on electronic donating ability, SOD-like activity, xanthine oxidase inhibition, whitening effect, nitric oxide inhibition have been investigated in the physiological activity measurement of function experiment. Results : We used BHA and kogic acid for the comparative. As a result of testing electron donating ability, at over 100ppm of water extract and ethanol extract, BHA showed relatively high donating ability by more than 90%. And as a result of measuring SOD like activity, 1000ppm of water extract showed an effect of 30% and ethanol extract showed an effect of 40%, BHA showed an effect of 30%. In the xanthine oxidase inhibition test, 1000ppm of water extract showed an effect of 70% and ethanol extract showed an effect of 63%, BHA showed an effect of 100%. In the tyrosinase inhibition test, 1000ppm of water extract showed an effect of 55% and ethanol extract showed an effect of 87%, Kogic acid showed an effect of 98%. In the anti-inflammatory test, the water extract and ethanol extract inhibited the generation of nitric oxide. Conclusions : The results indicated that extract of Chestnut inner shell can be used as a natural ingredients with biological function in cosmetics ingredients.
Kim, Min Ju;Shin, Mi-Rae;Lee, Jin A;Park, Soon-Ae;Park, Hae-Jin;Lee, Jeong Hoon;Roh, Seong-Soo
The Korea Journal of Herbology
/
v.35
no.6
/
pp.21-28
/
2020
Objectives : The objective of this study was to investigate the improvement effect of Sprout of Coix lacryma-jobi var. mayuen Stapf water extract (SC) on the dextran sulfate sodium (DSS)-induced ulcerative colitis mice. Methods : The antioxidant activity of SC was measured through total polyphenol and total flavonoid content in vitro. The experiment was conducted with seven-week-old male Balb/c mice. After 1 week adaptation, acute colitis was induced by oral administration of 5% DSS dissolved in drinking water, for 7 days. And normal mice received drinking water without DSS throughout the entire experimental period. For each experiment, the mice were divided into 4 groups and 24 colitis mice were arbitrarily allocated into 3 groups (n = 8/group); Normal group, Control group, SC 100 mg/kg treated group (SCL), SC 200 mg/kg treated group (SCH). Serum and colon tissues were collected after one weeks of drug administration. Results : ROS levels, ONOO- levels, AST, and ALT in serum were decreased in SC treated groups compared to the control group. Western blotting measurements of Nrf2, HO-1, SOD, catalase, GPx-1/2, IL-4, IL-10, and Bcl2 showed that the SC treated groups was increased compared to the Control group. Also, western blot measurements of NF-κBp65, p-IκBα, COX-2, iNOS, TNF-α, IL-1β, Bax, and Caspase-3 showed that the SC treated groups was reduced compared to the Control group. Conclusion : Taken together, these results suggest that SC treatment can attenuate the DSS-induced colitis though inhibiting NF-κB pathway and enhancing Nrf2 pathway. Therefore, SC was the potential to be used as a natural therapeutic drug.
Wooden standing Bodhisattva in the collection of the National Museum of Korea (Bon 8239) was purchased as part of the museum's Central Asian collection during the Museum of Japanese Goverment General of Korea. The wooden statue exhibiting classical characteristics of Song Dynasty Buddhist sculptures is colored on the whone. The result of condition check for exhibition in 2014, it has severely damaged, with discoloring and exfoliation in color pigment and crack of wood observed in various areas. The object was therefore treated for conservation. A series of analysis were performed also at this time to determine the production technique and the materials, including testing of the X-ray penetration depth, X-ray fluorescence analysis and wood species analysis. This revealed that the statue was made by joining several separate pieces of wood. As for color pigments, the white pigment was either chalk (CaCO3) or gypsum(CaSO4·2H2O), and the green pigment was emerald green (Cu(C2H3O2)2·3Cu(AsO2)2). The red pigment appeared to be lead red(Pb3O4) and the blue pigment was ultramarine blue (3Na2O·3Al2O3·6SiO2·2Na2S). All the pigments were repainted in later eras. The analysis, indicated that the wood was derived from a tree of the genus Populus, family Salicaceae. The wooden standing Bodhisattva was repaired and reinforced with natural materials and was brought to a stable condition necessary for display.
Proceedings of the Korean Powder Metallurgy Institute Conference
/
2002.07a
/
pp.25-37
/
2002
The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.
KSCE Journal of Civil and Environmental Engineering Research
/
v.31
no.6C
/
pp.213-220
/
2011
Fines such as silt or clay are usually mixed with granular particles in natural or reclaimed soils which are slightly cemented. Such fines contained within weakly cemented soils may influence permeability and also mechanical behavior of the soils. In this study, a series of unconfined compression tests on weakly cemented sands with fines are carried out in order to evaluate the effect of fines on unconfined compressive strength (UCS) of cemented soils. Two different cement ratios and fine types were used and fine contents varied by 5, 10, and 15%. Two types of specimens were prepared in this testing. One is the specimen with the same compaction energy applied. The other is the one with the same dry density by varying compaction energy. When the same amount of compaction energy was applied to a specimen, its density increased as a fine content increased. As a result, the UCS of cemented soils with fines increased up to 2.6 times that of one without fines as an amount of fines increased. However, when the specimen was prepared to have the same density, its UCS slightly decreased and then increased a little as a fine content increased. Under the same conditions, a UCS of the specimen with silt was stronger than the one with kaolin. As a cement ratio increased, a UCS increased regardless of fine type and content.
About 2-year old northern goshawk (Accipiter gentilis) which is designated as natural monument (#323-1) in Republic of Korea was rescued by a local farmer and presented with a 2-weeks history of pain, swelling, stiffness and limping. On physical examination, plantar pododermatitis and digit IV weakness were observed. Radiographic findings also showed bone lyses with soft tissue swelling in the foot. A definite diagnosis was made as stage III bumble foot after multidisciplinary approach of the patient. Bacterial culture was performed, and concurrently antibiotic susceptibility testing is determined using wound site exudates specimen. Bacterial isolates were identified as Staphylococcus aureus, known normal skin flora. Treatment was initiated with surgical incision and necrotized tissues removal. Lavage-drainage and ball bandage were applied with topical mupirocin ointment application. Doughnut shaped pad was attached on bottom of the ball bandage to reduce weight bearing. After three weeks of intensive care, the wound site completely healed but digit IV weakness remained permanently. The goshawk returned to nature after eight weeks after treatment.
This study was carried out to construct a DNA profile database of 100 strawberry cultivars using microsatellite markers. Two hundred seventy four microsatellite primer pairs were screened with a set of 21 strawberry cultivars with different morphological traits. Twenty five primer pairs were selected because they produced reliable and reproducible fingerprints. These primer pairs were used to develop DNA profiles of 100 strawberry cultivars. Three to thirteen alleles were detected by each marker with an average of 7.50. The average polymorphism information content varied from 0.331 to 841 (average 0.706). Cluster analysis showed that the 100 cultivars were divided into 7 major groups reflecting geographic origin and pedigree information. Moreover, most of the cultivars could be discriminated by marker genotypes. These markers will be useful as a tool for the protection of plant breeders' intellectual property rights in addition to providing the means to intervene seed disputes relating to variety authentication.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.