• 제목/요약/키워드: natural teeth

검색결과 381건 처리시간 0.026초

Amlodipine으로 인한 임플란트 주위 조직의 비대 (Amlodipine-induced gingival overgrowth around dental implants)

  • 유장배;김일규;최진호;이재관;엄흥식;장범석
    • Journal of Periodontal and Implant Science
    • /
    • 제35권3호
    • /
    • pp.591-596
    • /
    • 2005
  • Amlodipine, nifedipine, and felodipine are calcium channel blocking agents, which are cause of unwanted gingival overgrowth around natural teeth. Many studies has been performed about this unwanted effects. However, the exact etiology remains uncertain.Few reports and investigations can be found in the literature on drug-induced gingival overgrowth around dental implants. The present case reports that amlodipine-induced gingival overgrowth occurred in peri-implant sites, confirms clinical and histological features in hyperplastic peri-implant tissues. Clinical and histological features of amlodipine-induced gingival overgrowth around dental implants were similar to that of tissue around natural teeth.

골유착성 임플란트를 중간 지대치로 사용한 고정성 보철물의 응력분석 (A TWO DIMENSIONAL STRESS ANALYSIS OF FIXED PROSTHESIS WITH OSSEOINTEGRATED IMPLANT AS AN INTERMEDIATE ABUTMENT)

  • 박상수;방몽숙
    • 대한치과보철학회지
    • /
    • 제31권4호
    • /
    • pp.611-624
    • /
    • 1993
  • The purpose of this study was to analyze the stress distribution of the natural teeth, the implant, the prosthesis and the supporting tissue according to the types of implant and connection modality in the five-unit fixed partial denture with a implant pier abutment. A Two dimensional stress analysis model was constructed to represent a mandible missing the first and second premolars and first molar. The model contained a canine and second molar as abutment teeth and implant pier abutments with and without stress-absorbing element. Finite element models were created and analyzed using software ANSYS 4.4A for IBM 32bit personal computer. The results obtained were as follows. 1. Implant group, compared to the natural teeth group, showed a maximum principal stress at the superior portion of implants and a stress concentration at :he neck and end portion. 2. Maximum principal stress and maximum Von Mises stress were always lower in the case of rigid connection than nonrigid connection. 3. A cylinder type implant with stress absorbing element and screw type implant were generally similar in the stress distribution pattern. 4. A screw type implant, compared to the cylinder type implant, showed a relatively higher stress concentration at both neck and end portion of it. 5. Load B cases showed higher stress concentration on the posterior abutments in the case of nonrigid connector than rigid connector. 6. A maximum displacement was always lower in the case of rigid connection than nonrigid connection. These results suggest that osseointegrated implant can be used as an intermediate abutment.

  • PDF

상악 제1소구치에서 전부도재관의 finish line 형태에 따른 파절강도와 응력 분포에 관한 연구 (Fracture Resistance and Stress Distribution of All Ceramic Crowns with Two Types of Finish Line on Maxillary First Premolar)

  • 이상권;동진근
    • 구강회복응용과학지
    • /
    • 제19권3호
    • /
    • pp.219-237
    • /
    • 2003
  • he purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown, and 0.5mm width chamfer finish lines on the maxillary first premolar. 30 sound maxillary first premolars were selected and then storaged in 5% NaOCl and saline. 15 teeth were performed preparation for each group(1.0mm rounded shoulder, 0.5mm chamfer). After 30 stone dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the natural teeth. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co., Germany)was used to measure the fracture strength, with stress loading on the occlusal surface between buccal and lingual cusp. And also, three-dimensional finite element model was used to measure the stress distribution with two types of the finish lines(1.0mm rounded shoulder, 0.5mm chamfer) and two loading conditions(both buccal and lingual cusp inclination, lingual cusp inclination only). The result of the this study were as follows. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(842N) showed higher value than that of the chamfer(590N) (p<0.05). In the three dimensional finite element analysis of all ceramic crown, metal die and natural teeth model did not show any differences in stress distribution between finish lines. Generally, when force was loaded on the occlusal inclination of buccal and lingual cusp, the stress was concentrated on the loading point and the central groove of occlusal surface. When force was loaded only on the occlusal inclination of lingual cusp, the stress was concentrated on the lingual finish line and loading point.

일부 노인들의 가철성 틀니 사용 실태 및 만족도 조사 (Study on Aged Men's Utilization Status and Satisfaction of Removable Dentures)

  • 박종희;박지원
    • 대한치과기공학회지
    • /
    • 제34권3호
    • /
    • pp.291-302
    • /
    • 2012
  • Purpose: It is to survey old men's utilization status of dental clinic and temporary-binding dentures and then to provide basic data to make a program for manufacturing old men's dentures and their teeth health education. Methods: Random selection was made on old men living in Daejeon and Chungnam, and a survey was conducted from April 15 to May 20, 2011. 500 questionnaires were distributed and 420 questionnaires were collected. Using spss 18.0 program, final analysis was made on 363 questionnaires except for 57 questionnaires which had missing value or showed some doubts about the unreliability. Results: 1. With respect to number of natural teeth as per the age, the upper/lower jaws had meaningful differences (P<.001), which means that the older the person is, the smaller number of natural teeth is. In the meantime, there was no meaningful difference according to sex. 2. With respect to kind of prosthetics installed in a mouth as per the age, there was meaningful difference in the upper jaws (P<.05) but there was no meaningful difference in the lower jaws. It was found out that the older the persons are, the more they use removable dentures while the younger the persons are, the more they use fixed partial dentures. 3. With respect to mouth health condition recognized by oneself, it showed bad (44.4%) and good (10.3%),which means recognition as bad is greater, and the age when prosthetics were first used is dispersed variously from below 40 to over 70. 4. Dental care institutions which they mainly used are hospital and clinics (91.5%), and 66.4% of them visited dental clinics lately. Preferential treatment if they go to dentists is as follows in the order of prosthetics (33.9%), gum treatment (24.2%) and pain treatment (14.9%). 5. 68.4% of them revisited dentists after installation of dentures and the reason for revisit is as follows in the order of poorly fitted dentures (35.1%), painful gum 25.9%, regular check-up 25.4% and difficult chewing 9.6%. Conclusion: As our country enters into an aging society, mouth health problem of old men has come to a serious issue, and therefore, a survey was conducted on some old men with respect to their utilization status of dental clinic and removable dentures in order to provide basic data for improvement of quality of their life, maintenance and enhancement of their mouth health. The study result shows that the older they are, the higher the loss rate of teeth as well as needs for prosthetics are, and thus it is thought the study will help to develop mouth health education program which may improve quality of old men's life by recovery of mouth functions declined due to loss of teeth and by regular check-up, education for mouth health control and following-up control of dentures.

붕괴된 교합을 가진 환자에서 교정치료와 임플란트를 이용한 전악 수복: 증례보고 (Full mouth rehabilitation using orthodontic treatment and implants in patient with collapsed occlusion: A case report)

  • 안아영;곽재영;허성주;김성균
    • 대한치과보철학회지
    • /
    • 제57권4호
    • /
    • pp.439-447
    • /
    • 2019
  • 임플란트 식립 시 자연치와 임플란트 사이의 간격은 치주 조직 보존 및 심미에 중요한 요소이다. 또한 고정성 치아 수복 시 치아의 비정상적 위치 이동과 경사 이동은 의도적 근관치료를 필요로 할 수도 있고 저작효율에 불리하게 작용하기도 한다. 본 증례에서는 치열이 불균일하고 붕괴된 교합을 가진 환자에서 완전구강회복을 시행하기에 앞서 치아재배열을 위한 교정치료를 진행하였다. 환자는 통증이나 소리와 같은 측두하악관절장애 증상 및 불편감이 없으므로 교정치료를 진행하는 데 무리가 없었다. 임플란트 식립 전부터 시작한 교정치료를 임플란트 임시 보철물 시적 후에도 진행하였고 전치부 보호 및 심미를 위하여 교합고경을 전치부 기준 2 mm 거상하였다. 교정치료 완료 후 임플란트 및 자연치에 도재전장금관(Porcelain-fused-to-metal crown, PFM crown) 혹은 브릿지(bridge)로 최종 수복하였다. 환자의 치열 개선 및 무치악부 수복으로 기능적, 심미적으로 만족할 만한 결과를 보였다.

R.P.I.(ring pin implant)를 응용한 치아의 재식과 이식 (Transplantation and Replantation Using R.P.I.(ring pin implant))

  • 김재철
    • 대한심미치과학회지
    • /
    • 제8권1호
    • /
    • pp.36-44
    • /
    • 1999
  • No one really doubts that the hottest area of dentistry in 21st century would most likely be 'implant'. With the support of a vast amount of research, implant has been successfully and rapidly absorbed into the field of general dentistry including private practitioners. For teeth with hopeless(or refractory) periodontitis or periapical pathosis, with no hesitation most dentists would think extraction as the sole treatment option followed by prosthodontic replacement possibly including implant. Not many dentists would take Trasplantation/Replantation as another treatment option for a particular condition. Dentistry is often more focused on 'Restoration' than 'Preservation' of natural dentition. 'Biologic Implant' is obviously much closer to the concept of 'Preservation'. Many different types of biologic implant system have been introduced to clinical dentistry so far. Many of those have failed to earn reasonable acknowledgement despite of the clinical success they brought. For some reason biologic implant has rather been alienated for long time. RPI(Ring Pin Implant) is designed to improve the prognosis and success rate of transplanted/replanted teeth. RPI is a Ti-based custom made implant system. It is fabricated either by electric casting or milling process. The major feature RPI gas is the 'ring & hole' structure. The hole should be no less than 1mm diameter to allow bone bridge formation thru it. The ring structure and bone bridge formation creates anti-torque activity, which largely increases the 'initial stability' of the transplanted/replanted teeth. It is also reported that RPI is beneficial in the aspect of resisting root resorption following replantation/transplantation procedure.

  • PDF

Bar attachment와 Konus telescope를 이용한 부분 무치악 환자의 수복 (Clinical Appliance of Konus Telescope Denture and Bar-Retained Overdenture on Partially Edenturous Patient)

  • 최성호;심준성;이호용;이근우
    • 구강회복응용과학지
    • /
    • 제18권2호
    • /
    • pp.119-126
    • /
    • 2002
  • The purpose of this study was to restorate a patient who has a few remaining teeth with #15,23,24 supported Konus telescope denture in Maxillar and #44,43,33,34 supported Dolder bar retained overdenture in Mandible. Konus telescope and bar retained overdenture was taken better results in retention, support, stability compair with regular Removable partial denture. In Removable partial denture, the change of remaining teeth and edentulous ridge is natural. But Konus telescope and bar retained overdenture is a little effected in this change, so it is possiblble in long-term use. In cosider of patient's medical history and the possibility of additional tooth loss, Konus telescope denture can be easily repaired. Compaired with Konus telescope and bar retained overdenture showed high stability and easy cleansing because of rigid support, cross - arch splinting, and simple design. In delivery, patient had a difficulty with removal of denture and plaque control, but showed better condition, good oral hygienic care. Patient satisfied with denture functionally and esthetically. This study showed Konus telescope and bar retained overdenture was effective for treatment of patient remaing a few teeth in function, esthetic and psycologic satisfaction.

치과 임플랜트 보철 장착자의 구강 감각 기능에 관한 연구 (A STUDY ON ORAL SENSORY FUNCTION IN THE IMPLANT-SUPPORTED PROSTHESES WEARERS)

  • 장경수;김영수
    • 대한치과보철학회지
    • /
    • 제29권1호
    • /
    • pp.215-232
    • /
    • 1991
  • In this study, oral sensory function in the osseointegrated root form implant-supported prostheses wearers was estimated by measuring occlusal tactile perception threshold of thickness and sensibility threshold against lateral static loading, and comparing with normal dentition subjects and complete denture wearers group. Osseointegrated root form implants seemed to be restored in the sensation to some extent, and so, dental implants restored edentulous patients in a wide meaning. Conclusions were summarized as following. 1. Occlusal tactile perception threshold of thickness was highest in complete denture wearers group, following by implant-supported prostheses wearers group, normal dentition subjects group. 2. In the implant-supported prostheses wearers group, occlusal tactile perception threshold of opposing artificial teeth case was higher than of opposing natural or opposing implantsupported teeth case. 3. Sensibility threshold against lateral loading of complete denture wearers and implantsupported prostheses wearers group was higher than that of normal dentition subject group. 4. In the implant-supported prostheses group, sensibility threshold against lateral loading was not significantly different between upper and lower jaws. 5. In occlusal tactile perception threshold of thickness and sensibility threshold against lateral loading test, there was no regularity among values of each tooth, and no significant difference between anterior and posterior teeth as well.

  • PDF

표백제에 따른 외인성 착색치아의 표백효과 및 표면변화에 관한 연구 (BLEACHING EFFECT AND SURFACE CHANGE INDUCED BY 3 BLEACHING AGENTS ON THE EXTRINSICALLY STAINED TEETH)

  • 이재윤;신동훈;홍찬의
    • Restorative Dentistry and Endodontics
    • /
    • 제20권2호
    • /
    • pp.802-811
    • /
    • 1995
  • The purpose of this in vitro study was to compare the bleaching effect and the surface change according to three bleaching agents (Rembrandt, Natural White, Hi-Lite). Teeth were stained by artificial food colorants for 6 weeks and bleached for 4 weeks. The teeth were evaluated with spectrophotometer after bleaching on the 1st week and on the 4th week. The surface change of enamel was evaluated under SEM after exposure to 3 agents for 1 and 24 hours. The results were as follows : 1. All groups showed increased Lightness difference after bleaching. 2. After 1 week, only Rembrandt group showed significant bleaching effect compared to control group. 3. After 4 weeks, Rembrandt group and Hi-Lite group showed significant bleaching effect compared to control group. 4. SEM evaluation revealed that enamel surface underwent considerable change after 24 hours. Scratch disappeared and smooth surface was shown.

  • PDF

Lithium disilicate press ingot을 이용한 non-prep laminate veneer의 제작 (Making of non-prep laminate veneer using lithium disilicate press ingot)

  • 서동희
    • 대한심미치과학회지
    • /
    • 제29권1호
    • /
    • pp.25-34
    • /
    • 2020
  • 무삭제 라미네이트에서 사용하는 여러가지 방법 중에 press ingot을 이용한 제작 방법에 대해 기술했다. 무삭제 라미네이트는 제작 방법 및 보철물의 피개 범위를 선택하는 것이 매우 중요하며 결과에 큰 영향을 끼친다. 피개 범위와 제작 방법에 따른 장단점을 미리 숙지하고 선택함으로써 효과적이고 보다 나은 결과물을 만들 수 있다. 구강내 상황에 따라 선별적으로 잘 적용했을 때 치아를 삭제하지 않고 매우 만족스러운 결과를 낼 수 있는 선택지 중 하나라 생각한다.