• ETRI Journal
• /
• 제25권5호
• /
• pp.379-386
• /
• 2003

This paper presents the design of a narrow-band channel filter and its group-delay equalizer for a Ka-band satellite transponder. We used an 8th order channel filter for high selectivity with an elliptic-integral function response and an inline configuration. We designed a 2-pole, reflection-type, group-delay equalizer to compensate for the steep variation of the group-delay at the output of the channel filter, keeping the thermal stability at ${\pm}7$ ns of group-delay variation at the band edges over 15-55$^{\circ}C$. We devised a new tuning technique using short-ended dummy cavities and used it for tuning both the filter and equalizer; this removes the necessity of additional tuning after the cavities are assembled. Through measurement, we demonstrate that the group-delay-equalized filter meets the equipment requirements and is appropriate for satellite input multiplexers.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.165-171
• /
• 2022

The SiO₂/TiO₂ multilayer thin films used for narrow band pass filter were fabricated using E-beam evaporation method. The narrow band pass filter was used to enhance the resolution of spectroscopy and sensor applications with near infrared (NIR) light source. The narrow band pass filter with multilayer thin films were designed with Essential Macleod program. The multilayers of SiO₂/TiO₂ with 32 layers were deposited on the silicon encapsulation of IR with peak wavelength (λ_p) of 660 nm and NIR LEDs with λ_p of 830 nm, 880 nm, and 955 nm. After NIR light passed through the narrow band pass filter, the full width of half maximum of 33.4~48.6 nm became narrow to 20~24 nm owing to the absorption of photons with short or long wavelength of designed band of 20 nm. The SiO₂/TiO₂ band pass filter fabricated in this study can be used for sensor, optoelectronics, and NIR spectroscopy applications.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1984년도 춘계학술발표회논문집
• /
• pp.25-28
• /
• 1984

This paper describes the design of band-pass filter using the dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter as band-pass filter. Because dielectric resonator band~pass filter has a very high-Q, the bandwidth of this filter is very narrow. as a result of experiment, the dielectric resonator bandwidth of this filter is very narrow. As a result of experiment, the dielectric resonator band-pase filter has various modes central frequencies due to the mode change and good characteristric as a band-pass filter.

• 한국군사과학기술학회지
• /
• 제22권3호
• /
• pp.332-340
• /
• 2019

Electronic warfare systems are needed to be advantageous in the modern war. Many radar threat signals with various frequency spectrums and complicated techniques exist. For detecting the threats, a receiver with wide and narrow-band digital processing is needed. To process a wide-band searching mode, a polyphase filter bank has become the architecture of choice to efficiently detect threats. A polyphase N-path filter aligns the re-sampled time series in each path, and a discrete Fourier transform aligns phase and separates the sub-channel baseband aliases. Multiple threats and CW are detected or rejected when the signals are received in different sub-channels. And also, to process a narrow-band precision mode, a direct down converter is needed to reduce aliasing by using a decimation filter. These digital logics are designed in a FPGA. This paper shows how to design and develop a wide and narrow-band digital receiver that is capable to detect the threats.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.7-12
• /
• 2005

A compact microstrip band-selective filter for ultra-wideband (UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator bandstop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band (3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is 29% reduction in footprint compared to the traditional bandstop filter using L-shaped resonators. The measured results show that the filter has a wide passband of 146.7 % (2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of 7.42 % (5.32 GHz to 5.73 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.

• 전자공학회논문지D
• /
• 제35D권8호
• /
• pp.82-88
• /
• 1998

We propose and design a new type of anrrow band-pass optical filter based on two fiber gratings with different reflection wavelength. The ripples occur in the spectra of the filter with two uniform fiber gratings. Our simulation results also show that the ripples disappear with the fiber gratings apodized to both gaussian and hyperbolic tangent function. The hyperbolic tangent function seems to be a better apodization function for improving the filter's performance in terms of narrow pass bandwidth and high transmission.

• 한국통신학회논문지
• /
• 제27권4B호
• /
• pp.372-378
• /
• 2002

본 논문에서는 Ku 대역 위성 중계기용 도파관형 협대역 채널 여파기를 설계, 제작하였으며 2단 반시형 등화기를 사용하여 대역 내에서의 군지연 및 진폭 변화를 최소화하였다. 주파수 선택도 규격을 만족시키기 위하여 채널 여파기는 8차 타원 응답형으로 설계하였으며 무게 및 부피 최소화를 위하여 여파기와 등화기 공히 원통형 공동의 TEl13 모드의 수직, 수평 편파를 이용하는 이중모드 공진기로 설계하였다. 제작한 채널 여파기와 등화기는 위성 중계기에 적용 가능한 성능을 나타내었다.

• 한국항해학회지
• /
• 제22권4호
• /
• pp.59-67
• /
• 1998

A quick and automatic detection with no harm to the goods is very important task for improving quality control, process control and labour reduction. In real fields of industry, defect detection is mostly accomplished by skillful workers. A narrow band eliminating spatial filter having characteristics of removing the specified spatial frequency is developed by the author, and it is proved that the filter has an excellent ability for on-line and real time detection of surface defect. By the way,. this spatial filter shows a ripple phenominum in filtering characteristics. So, it is necessary to remove the ripple component for the improvement of filter gain, moreover efficiency of defect detection. The spatial filtering method has a remarkable feature which means that it is able to set up weighting function for its own sake, and which can to obtain the best signal relating to the purpose of the measurement. Hence, having an eye on such feature, theoretical analysis is carried out at first for optimal design of narrow band eliminating spatial filter, and secondly, on the basis of above results spatial filter is manufactured, and finally advanced effectiveness of spatial filter is evaluated experimentally.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2006년도 제5회 추계학술대회 및 정기총회
• /
• pp.175-178
• /
• 2006

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
• /
• pp.357-360
• /
• 1998

DS/CDMA system rejected narrow-band interference and additional White Gaussian noise which are occured at multipath, intentional jammer and multiuser to share same bandwidth in mobile communication systems. Because of having not sufficiently obtained processing gain which is related to system performance, they were not effectively suppressed. In this paper, an matched filter channel model using backpropagation neural network based on complex multilayer perceptron is presented for suppressing interference of narrow-band of direct sequence spread spectrum receiver in DS/CDMA mobile communication systems. Recursive least square backpropagation algorithm with backpropagation error is used for fast convergence and better performance in matched filter receiver scheme. According to signal noise ratio and transmission power ratio, computer simulation results show that bit error ratio of matched filter using backpropagation neural network improved than that of RAKE receiver of direct sequence spread spectrum considering of con-channel and narrow-band interference.