• Journal of Sensor Science and Technology
• /
• v.19 no.5
• /
• pp.337-341
• /
• 2010

In this work, the nanocrystalline ZnO/polycrystalline(poly) aluminum nitride(AlN)/ Si-layered structure was fabricated for humidity sensor applications based on surface acoustic wave(SAW). The ZnO film was used as a sensitive material layer. The ZnO and AlN(0002) were deposited by a sol-gel process and a pulse reactive magnetron sputtering, respectively. The ZnO sensitive films coated on AlN have a hexagonal wurtzite structure after the thin films annealed at $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$. The surface of the film exhibits sponginess and a nanometer particle size(below 50 nm). The largest shift in the frequency response was at approximately 200 kHz(the relative humidity: 10 %~90 %) for the structure annealed at $400^{\circ}C$. The effect of the change in the environmental temperature on the frequency response of the SAW humidity sensor was also investigated.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.142-143
• /
• 2007

나노미터 크기의 동심원 패턴이 형성된 도광판을 설계하기 위한 전산모사를 수행한다. 광원은 LED 1개를 사용하였으며 PMMA 도광판 재질의 파장에 따른 빛의 흡수 현상을 고려하였다. 도광판 위치에 따른 투과광선의 세기 분포, 투과광선의 투과각도 분포 및 편광에 따라 투과광선의 세기가 어떻게 달라지는지 살펴보았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.166-166
• /
• 2000

We studied electronic structure of magnetic semiconductors EuO, EuS, and EuTe. The photoemission spectra show localized Eu 4f states and broad anion p bands. As the size of anion increases from oxygen to tellurium, anion p band width increases and eventually overlaps Eu 4f states. Hence in EuO and EuS, Eu 4f states are the highest occupied stated lying above anion p band, while Te 5p band spreads widely over Eu 4f states to become valence band maximum in EuTe. It was also observed that Eu 4f states have width of 0.7eV and dispersion of 0.2eV in EuS by angle resolved photoemission spectroscopy. The width of the 4f spectra mainly originates from atomic multiplets, but the much larger dispersion than that of Eu metal is due to p-f mixing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.482-484
• /
• 2008

Anodic aluminum oxide (AAO) which prepared with two-step anodizing method (with dissimilar solutions) was used as a template to fabricate highly ordered, free standing metal nano-rods. AAO nano-template technique can realize self-organized hexagonal pore structure with nanometer dimension size, it's easy to control pore diameter, length and density by varying anodizing conditions. Ni and Ni/Fe/Cu multi-metal layer nanorods were electrochemically deposited into AAO nano-template by AC voltage in simple sulfate solutions.. The properties of samples are tested by X-ray diffraction (XRD), field emission microscopy (FE-SEM).

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.3
• /
• pp.185-196
• /
• 2015

Titanium (Ti) based alloys are widely used in biomedical implants due to their low density, excellent corrosion resistance and good biocompatibilities. In recent years, growing interest in sever plastic deformation (SPD) has stimulated research and development on the techniques to attain refining of the grain size to the submicrometer or even nanometer level. The mechanical and wear properties determining the application of Ti in medicine may be improved via SPD. High pressure torsion (HPT) technique is one of the approaches available for improving the mechanical and wear properties of biomedical Ti materials. Accordingly, this article is designed to examine most recent state of the art scientific works related to the developments in mechanical properties and wear resistance of biomedical Ti materials processed by HPT. A comprehensive review in this area is systematically presented.

• Journal of Integrative Natural Science
• /
• v.2 no.4
• /
• pp.280-284
• /
• 2009

The unique electronic property of graphene sheets provides potential applications in nanocomposites and fabricating various nicroelectrical devices, such as field-effect transistors, ultrasensitive sensors, and electromechanical resonators. Several effective techniques have been developed for preparing graphene sheets. Among these technique, mechanical exfoliation can produce pure graphene and epitaxial graphene sheets have been prepared by treatment of silicon carbide wafers at high temperature. Recently, graphene sheets have been developed by chemical reduction method from graphene oxide. In this work, we have synthesized graphene sheets based on mechanical exfoliation and chemical reduction methods. Graphene sheets were characterized by field-effect scanning electron microscope (FE-SEM). The size of graphene sheets was from few hundreds nanometer to decades micrometer.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.183-187
• /
• 2005

Thin films of diblock copolymers may be suitable for semiconductor device applications since they enable patterning of ordered domains with dimensions below photolithographic resolution over wafer-scale area. We obtained nanometer-scale cylindrical structure of dibock copolymer of polystyrene-block-poly(methylmethacrylate), PS-b-PMMA, also demonstrate pattern transfer of the nanoporous polymer using both reactive ion etching. The size of fabricated naonoholes were about 10 nm. Fabricated nanopattern surface was observed by field emission scanning electron microscope (FESEM).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.252-252
• /
• 2009

In this work, the nanocrystalline ZnO/polycrystalline (poly) aluminum nitride (AlN)/Si structure was fabricated for humidity sensor applications based on surface acoustic wave (SAW). In this structure, the ZnO film was used as sensing material layer. These ZnO and AlN(0002) were deposited by so-gel process and a pulse reactive magnetron sputtering, respectively. These experimental results showed that the obtained SAW velocity on AlN film was about 5128 m/s at $h/\lambda$=0.0125 (h and $\lambda$ is thickness and wavelength, respectively). For ZnO sensing layers coated on AlN, films have hexagonal wurtzite structure and nanometer particle size. The crystalline size of ZnO films annealed at 400, 500, and 600 $^{\circ}C$ is 10.2, 29.1, and 38 nm, respectively. Surface of the film exhibits spongy which can adsorb steam in the air. The best quality of the ZnO film was obtained with annealing temperature at 500 $^{\circ}Cis$. The change in frequency response (127.9~127.85 MHz) of the SAW humidity sensor based on ZnO/AlN structure was measured along the change in humidity (41~69%). The structural properties of thin films wereinvestigated by XRD and SEM.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1969-1972
• /
• 2008

In this study, horse spleen apoferritins were induced to form biominerals using up to 3000 Fe atoms per protein molecule. The morphology and crystallinity of the nanometer-sized biominerals formed in the ferritins were then analyzed using field emission-energy filtering-transmission electron microscopy (FE-TEM). The ferritins were found to have reconstitution yields of 60-70% in the experiments. The mean core size of the ferritins varied somewhat with protein concentrations, indicating that crystal growth in ferritins could be controlled via protein concentrations. The core mineral size increased with the amount of Fe used. Lattice fringes of the core, associated with good crystallinity, were found in all samples. The lattice fringe images of a single domain ferrihydrite mineral appeared frequently in the (011) planes (d-spacing of 0.246 nm) under [100] zone axis in all samples of this study. In addition, the lattice image occasionally revealed fringes corresponding to the (100) planes (d = 0.254 nm) from the [001] zone axis, indicating the characteristic pattern of hexagonal crystal lattice. Diffraction patterns in the minerals identified as ferrihydrite were fitted well into the space group of $P3_{1c}$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.66-75
• /
• 2013

The spin modulation is proposed with modulating frequency and amplitude simultaeously, and realized with the array sturcture easily located due to the nanometer size of the spintronics oscillator. In this paper, the dual-channel receiver is deisgned for detecting the spin modulated signal. Resultly, we confirmed the dual-channel recevier well detected the data sent through the spintronics oscillator array, and processed up to 200 kbps on each channel. Distance is limited up to 1 cm due to the low level signal under -60 dBm. The realized dual-channel receiver has the size of $56{\times}33mm^2$.