• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.547-548
• /
• 2006

In order to realize the commercial application of HTSC materials, it is necessary to develop the fabrication process of high Tc oxide superconductor materials with desired shape and for practical application and high critical current density as well as good mechanical strength which can withstand high lorenz force generated at high magnetic field. Much studies have been concentrated to develop the fabrication technique for high critical current density but still there are a lot of gap which should be overcome for large scale application of HTSC materials at liquid nitrogen temperature. Recently some new fabrication techniques have been developed for YBaCuO bulk superconductor with high mechanical strength and critical current density. In this project, the establishment of fabrication condition and additive effects of second elements were examined so as to improve the related properties to the practical use of YBaCuO superconductor, and we reported the production of the YBaCuO high Tc superconductor by the pyrolysis method.

• 한국재료학회지
• /
• 제27권9호
• /
• pp.507-511
• /
• 2017

An optimum route to fabricate oxide dispersion strengthened ferritic superalloy with desired microstructure was investigated. Two methods of high energy ball milling or polymeric additive solution route for developing a uniform dispersion of $Y_2O_3$ particles in Fe-Cr-Al-Ti alloy powders were compared on the basis of the resulting microstructures. Microstructural observation revealed that the crystalline size of Fe decreased with increases in milling time, to values of about 15-20 nm, and that an FeCr alloy phase was formed. SEM and TEM analyses of the alloy powders fabricated by solution route using yttrium nitrate and polyvinyl alcohol showed that the nano-sized Y-oxide particles were well distributed in the Fe based alloy powders. The prepared powders were sintered at 1000 and $1100^{\circ}C$ for 30 min in vacuum. The sintered specimen with heat treatment before spark plasma sintering at $1100^{\circ}C$ showed a more homogeneous microstructure. In the case of sintering at $1100^{\circ}C$, the alloys exhibited densified microstructure and the formation of large reaction phases due to oxidation of Al.

• 대한금속재료학회지
• /
• 제48권11호
• /
• pp.1009-1013
• /
• 2010

Extremely dense WC with a relative density of up to 99% was obtained within five minutes under a pressure of 80 MPa using the High-Frequency Induction Heated Sintering method. The average grain size of the WC was about 71 nm. The advantage of this process is not only rapid densification to obtain a neartheoretical density but also the prohibition of grain growth in nano-structured materials. The hardness and fracture toughness of the dense WC produced by HFIHS were $2660kg{\cdot}mm^{-2}$ and $7.2MPa{\cdot}m^{1/2}$, respectively.

• 전기화학회지
• /
• 제22권4호
• /
• pp.164-171
• /
• 2019

Nano-sized $SnO_2$ powders were synthesized via a solvent thermal reaction using $SnClO_4$, NaOH, and ethylene glycol at $150^{\circ}C$. TGA, SEM, FT-IR, XRD, and Potentiostat/Galvanostat were employed to investigate the chemical and electrochemical characteristics of the synthesized $SnO_2$. The structure of $SnO_2$ was amorphous, and when heat treated at $500^{\circ}C$, it was transformed into a crystalline structure. The morphology obtained by SEM micrographs of the as-synthesized $SnO_2$ showed powder features that had diameters ranging 100 to 200 nm. The electrochemical performance of the crystalline $SnO_2$ as a Li-air battery cathode was better than that of the amorphous $SnO_2$. The specific capacity of the crystalline $SnO_2$ was at least 350 mAh/g at 10 mA/g discharge rate. However, there was some capacity loss of all the cells during the consecutive cycles. Keywords : Lithium-Air Battery.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.425-429
• /
• 2011

높은 레이저 복사 조도에 발생되는 금속 플라즈마의 발달 과정과 레이저 펄스 이후의 shadowgraph를 이용해 공기 중에서의 데토네이션과 연소 현상에 대해 연구되었다. 본 논문의 가장 중요한 점은 높은 레이저 에너지에 의해 삭마 된 알루미늄 플라즈마와 공기로부터의 산소와의 화학반응의 진행을 XRD를 통해 관측한 것이다. 또한 레이저를 통해 유도된 화학적 반응 파와 공기 중에서의 알루미늄 분진 폭발의 데토네이션과의 양적인 평가를 유도하였다. 이러한 연구는 덩어리 상태의 금속 샘플에서 산화제를 필요로 하지 않고 데토네이션을 발생시키는 새로운 방법을 제시할 것으로 여겨진다.

• 공업화학
• /
• 제32권5호
• /
• pp.497-503
• /
• 2021

본 연구에서는 악취가스 및 휘발성 유기 화합물을 산화 제거하기 위한 백금/티타니아를 허니컴 및 메탈폼 담체에 코팅하는 방법을 확인하였다. 다양한 방법 중 파우더 코팅과 나노 코팅에 대한 비교를 수행하였다. SEM/EDX (Scanning Electron Microscopy/Energy Dispersive X-ray spectroscopy) 분석은 허니컴 및 메탈폼의 표면 상태 및 노출된 백금 성분비를 조사하는데 사용되었다. 또한, 촉매 코팅 방법에 따른 톨루엔, 트리메틸아민, 아이소프로필 알코올의 제거 성능을 비교하였다.

• Advances in nano research
• /
• 제12권4호
• /
• pp.415-426
• /
• 2022

Nickel substituted cobalt-zinc ferrite nanoparticles with composition Co_0.5Zn_0.5Ni_xFe_2-xO₄ (x = 0.25, 0.5, 0.75, 1.0) were synthesized using a wet chemical method named citrate precursor method. Various characterizations of the prepared nanoferrites were done using X-ray powder diffractometry (XRD), Scanning electron microscopy (SEM), UV visible spectroscopy and Fourier transform spectroscopy technique (FT-IR). XRD confirmed the formation of cubic spinel structure of the samples with single phase having one characteristic peak at (311). The value of optical band gap (E_g) was found to decrease with Ni substitution and have values in the range 2.30eV to 1.69eV. A Fenton-type system was created by photocatalytic activity using source of visible light for removal of methylene blue dye. Observations revealed increase in the degradation of methylene blue dye with increasing nickel content in the samples. The degradation percentage was increased from 77.32% for x = 0.25 to 90.16% for x = 1.0 in one hour under the irradiation of visible light. Also, the degradation process was found to have pseudo first order kinetics model. Hence, it can be observed that synthesized nickel doped cobalt-zinc ferrites have good capability for water purification and its degradation efficiency enhanced with increase in nickel concentration.

• 한국광물학회지
• /
• 제20권2호
• /
• pp.135-145
• /
• 2007

최근 서브미크론 영역의 초미분쇄는 세라믹, 전자재료 등 새로운 기능성 물질의 개발과 더불어 매우 중요하게 인식되고 있다. 특히, 초미립자에 대한 수요증가에 따라 분쇄기로서 교반볼밀의 중요성도 증가하고 있다. 본 연구에서는 1 mm의 볼을 사용하고 700 rpm의 회전속도로 조작한 교반볼밀을 이용하여 방해석, 납석, 활석 등의 무기분말을 시료로 분쇄실험을 행하였다. 무기분말의 분쇄 시, 분쇄 특성의 정량적인 규명을 위하여, 입자의 크기 및 그 분포특성의 분석을 통해 분쇄산물의 입도분포를 얻음과 동시에 중위경의 변화를 관찰하였다. 방해석의 경우 원시료의 중위경이 $6.49{\mu}m$에서 $0.47{\mu}m$로, 납석의 경우 $3.91{\mu}m$에서 $1.14{\mu}m$까지 입자크기가 크게 작아졌으나, 활석의 경우 $10.30{\mu}m$에서 $6.67{\mu}m$까지만 작아져서 많은 변화를 보이지 않았다. 또한, 분쇄산물의 여러 가지 측정 결과를 토대로 분쇄조작 시 분쇄산물의 특성이 분쇄조건에 따라 분쇄속도에 미치는 영향을 알고자 하였다. 같은 실험 조작 조건에서 선택함수를 관찰한 결과, 방해석과 납석은 비슷한 분쇄거동을 보이는 것을 알 수 있었으나, 본 실험범위 내에서 활석의 분쇄거동은 크게 변화하지 않는 것이 관찰되었다.

• 한국추진공학회지
• /
• 제19권3호
• /
• pp.83-88
• /
• 2015

열차폐 코팅(Thermal Barrier Coating) 기술의 하나로 연구되는 전자빔(EB, Electron Beam) 증착에 사용되는 코팅재료는 증착 공정 중에 고출력의 전자빔이 조사되기 때문에, 균일코팅을 위해서는 증착 중 코팅재료의 형상유지 및 안정한 융탕 형성이 필요하며, 이를 위해 적절한 밀도와 미세구조를 갖춘 잉곳(Ingot) 형태의 코팅소스가 요구된다. 본 연구에서는 8 wt%의 이트리아($Y_2O_3$)가 안정화제로 첨가된 지르코니아(8YSZ) 조성을 활용하여, 고출력 전자빔 조사환경에 사용가능한 잉곳제조를 위해 최적의 원료분말 조건을 확보하고자 하였다. 제조된 잉곳시료들에 대한 전자빔 조사 시, 수십 마이크론과 수십 나노 크기의 입자들로 구성된 혼합형 분말로 제조된 잉곳의 경우, 나노크기의 분말만으로 제조된 경우보다 향상된 열충격 저항성을 보였다.

• Advances in nano research
• /
• 제16권2호
• /
• pp.127-140
• /
• 2024

Upon direct/indirect exposure to flame or heat, composite structures may burn or thermally buckle. This issue becomes more important in the natural fiber-based composite structures with higher flammability and lower mechanical properties. The main goal of the present study was to obtain an optimal eco-friendly composite system with low flammability and high thermal buckling resistance. The studied composite consisted of polypropylene (PP) and short abaca fiber (AF) with eggshell powder (ESP) and halloysite clay nanotubes (HNTs) additives. An optimal base composite, consisting of 30 wt.% AF and 70 wt.% PP, abbreviated as OAP, was initially introduced based on burning rate (BR) and the Young's modulus determined by horizontal burning test (HBT) and tensile test, respectively. The effects of adding ESP to the base composite were then investigated with the same experimental tests. The results indicated that though the BR significantly decreased with the increase of ESP content up to 6 wt.%, it had a very destructive influence on the stiffness of the composite. To compensate for the damaging effect of ESP, small amount of HNT was used. The performance of OAP composite with 6 wt.% ESP and 3 wt.% HNT (OAPEH) was explored by conducting HBT, cone calorimeter test (CCT) and tensile test. The experimental results indicated a 9~23 % reduction in almost all flammability parameters such as heat release rate (HRR), total heat released (THR), maximum average rate of heat emission (MARHE), total smoke released (TSR), total smoke production (TSP), and mass loss (ML) during combustion. Furthermore, the combination of 6 wt.% ESP and 3 wt.% HNT reduced the stiffness of OAP to an insignificant amount by maximum 3%. Moreover, the char residue analysis revealed the distinct differences in the formation of char between AF/PP and AF/PP/ESP/HNT composites. Afterward, dilatometry test was carried out to examine the coefficient of thermal expansion (CTE) of OAP and OAPEH samples. The obtained results showed that the CTE of OAPEH composite was about 18% less than that of OAP. Finally, a theoretical model was used based on first-order shear deformation theory (FSDT) to predict the critical bucking temperatures of the OAP and OAPEH composite plates. It was shown that in the absence of mechanical load, the critical buckling temperatures of OAPEH composite plates were higher than those of OAP composites, such that the difference between the buckling temperatures increased with the increase of thickness. On the contrary, the positive effect of CTE reduction on the buckling temperature decreased by raising the axial compressive mechanical load on the composite plates which can be assigned to the reduction of stiffness after the incorporation of ESP. The results of present study generally stated that a suitable combination of AF, PP, ESP, and HNT can result in a relatively optimal and environmentally friendly composite with proper flame and thermal buckling resistance with no significant decline in the stiffness.