• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.73-80
• /
• 2013

In the process of lithography using ultra violet light sources for semiconductor devices, most of defects are made by sub-micrometer pollutants generated at photochemical reactions. We proposed and developed a novel vibration-insensitive on-axis interferometer with a sub-micrometer lateral resolution by using the interference between two beams: one scattered from defects and the other reflected from a reference area without defects. The proposed system was successfully demonstrated to detect a small Al defect of 0.5 ${\mu}m$ diameter within the inspection time of less than 30 minutes over the area of the photo-mask which is 6 inch by 6 inch square.

• 마이크로전자및패키징학회지
• /
• 제13권3호
• /
• pp.13-17
• /
• 2006

밀도가 높고 주기적인 배열의 기공과 나노패턴이 된 텅스텐 나노점이 실리콘 산화물/실리콘 기판위에 형성이 되었다. 기공의 지름은 25 nm이고 깊이는 40 nm 이었으며 기공과 기공 사이의 거리는 60 nm이었다. nm 크기의 패턴을 형성시키기 위해서 자기조립물질을 사용했으며 폴리스티렌(PS) 바탕에 벌집형태로 평행하게 배열된 실린더 모양의 폴리메틸메타아크릴레이트(PMMA)의 구조를 형성했다. 폴리메틸메타아크릴레이트를 아세트산으로 제거하여 폴리스티렌만 남아있는 건식 식각용 마스크를 만들었다. 실리콘 산화막은 불소 기반의 화학반응성 식각법을 이용하여 식각했다. nm크기의 트렌치 안에 선택적으로 증착된 텅스텐 나노점을 만들기 위해서 저압화학기상증착(LPCVD)방법을 이용하였다. 텅스텐 나노점과 실리콘 트렌치의 지름은 26 nm 와 30 nm였다.

• 반도체디스플레이기술학회지
• /
• 제14권3호
• /
• pp.1-5
• /
• 2015

In photolithography process, resolution enhancement techniques such as optical proximity correction (OPC) and phase shift mask (PSM) have been applied to improve resolution. Especially, sub-resolution assist feature (SRAF) is one of the most important OPC to enhance image quality including depth of focus (DOF). However, imaging performance of the mask could be varied with the diffraction order amplitude changed by inserting SRAF. Therefore, in this study, we investigated the imaging properties and process margin of attenuated PSM with SRAF. Reflectivities of attenuated PSMs at 13.5 nm were 3, 6, 9% and simulation was performed by $PROLITH^{TM}$. As a result, aerial image properties and DOF as well as diffraction efficiency were improved by increasing the reflectivity of attenuated PSM. Additionally, printed critical dimension variations depending on SRAF width and space error were also reduced for attenuated PSM with high reflectivity. However, SRAF could be printed when reflectivity of attenuated PSM is high enough. In conclusion, optimization of reflectivity of attenuated PSM and SRAF to prevent side-lobe from being printed is needed to be considered.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2004년도 제26회 학술발표회 초록집
• /
• pp.84-84
• /
• 2004

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.419-420
• /
• 2009

The authors fabricated the nanostructural patterns on the surface of SiN antireflection layer of polycrystalline Si solar cell and the surface of crystalline Si wafer using anodic aluminum oxide (AAO) masks in an inductively coupled plasma(ICP) etching process. The AAO nanopattern mask has the hole size of about 70~80nm and an ave rage lattice constant of 100nm. The transferred nano-patterns were observed by the scanning electron microscope (SEM) and the enhancement of solar cell efficiency will be presented.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.245-250
• /
• 2016

In this paper, we demonstrate a self-imaging technique that can visualize longitudinal interference patterns behind periodically-structured objects, which is often referred to as Talbot carpet. Talbot carpet is of great interest due to ever-decreasing scale of interference features. We demonstrate experimentally that Talbot carpets can be imaged in a single exposure configuration revealing a broad spectrum of multi-scale features. We have performed rigorous diffraction simulations for showing that Talbot carpet print can produce ever-decreasing structures down to limits set by mask feature sizes. This demonstrates that large-scale pattern masks may be used for direct printing of features with substantially smaller scales. This approach is also useful for characterization of image sensors and recording media.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1553-1555
• /
• 2008

Super-hydrophobic treated Polyimide film was used as a flexible substrate for developing a new method of metallization. Hydrophilic patterns were fabricated by IN irradiation through shadow mask. Patterned super-hydrophobic substrate was dipped into a bath containing silver nano ink Silver ink was only coated on hydrophilic patterned area. Metal lines of $600{\mu}m$ pitch were fabricated successfully. However, their thickness was too thin to serve as interconnection. To overcome this problem, iterative dipping was conducted. After repeating five times, the thickness of silver metal lines were increased to over than $2{\mu}$. After heat treatment of silver lines, their resistivities were reduced to order of $30{\mu}{\Omega}$-cm the similar level of values reported in other literatures. So, a new method of metallization has high potential for application of RFID antenna and flexible electronics substrates.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.182-185
• /
• 2005

Indentation pattern and line pattern were machined on borosilicate(Pyrex 7740 glass) surface using the combination of mechanical machining by $Nanoi-indenter\circledR$ XP and HF wet etching, and a etch-mask effect of the affected layer of the nano-scratched and indented Pyrex 7740 glass surface was investigated. In this study, effects of indentation and scratch process with etching time on the morphologies of the indented and scratched surfaces after isotropic etching were investigated from an angle of deformation energies.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.332-332
• /
• 2015

Block Copolymer lithography는 deep nano-scale device 제작을 위한 기존의 top-down방식의 photo-lithography를 대체할만한 기술로 많은 연구가 진행되고 있다. polystyrene(PS)/poly-methyl methacrylate (PMMA)로 구성된 BCP의 nano-scale PS mask는 일반적인 플라즈마 공정에 쉽게 damage를 입는다. 중성빔 식각을 이용하여 식각 공정 중 발생하는 BCP의 degradation을 감소시키고, 비등방성 식각 profile을 얻을 수 있으며 sidewall roughness(SWR)와 sidewall angle(SWA)가 향상되는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.86-89
• /
• 2004

Organic thin film transistors (OTFTs) are fabricated on the plastic substrate through 4-level mask process without photolithographic patterning to yield the simple fabrication process. And we herewith report for the effect of dielectric surface modification on the electrical characteristics of OTFTs. The KIST-JM-1 as an organic molecule for the surface modification is deposited onto the surface of zirconium oxide $(ZrO_2)$ gate dielectric layer. In this work, we have examined the dependence of electrical performance on the interface surface state of gate dielectric/pentacene, which may be modified by chemical properties in the gate dielectric surface.