• 접착 및 계면
• /
• 제18권1호
• /
• pp.25-32
• /
• 2017

본 연구는 디스플레이 모듈 접합 공정에 적용하기 위해 자외선 경화형 아크릴계 점착제(PSA)에 실리카 나노 입자를 함량별로 첨가하여 실크 스크린 인쇄성 평가를 실시하였고, 유변학적 성질이 인쇄성 및 점착력에 미치는 영향을 고찰하고자 하였다. 점착제(PSA) 중합을 위한 기본 처방으로 2-ethylhexyl acrylate(2-EHA)와 acrylic acid(AA)를 93:7 비율로 고정하고 butyl acylate(BA), 2-hydroxyethyl acrylate(2-HEA)를 첨가하였다. 추가로 나노 입자는 친수성 및 소수성을 가지는 AEROSIL R974 및 AEROSIL 200을 각각 사용하였다. 나노 입자 함량이 4 또는 7 phr 이상 사용함에 따라 G', ${\eta}^*$ 값이 급격히 증가하였으며, 친수성 나노 입자 AEROSIL 200을 7 phr 이상 첨가했을 때에는 스크린 인쇄 시 투과성이 저하되었다. 점착력은 나노 입자 함량이 증가할수록 감소되는 경향을 보였으며, 친수성인 AEROSIL 200의 경우 점착력이 더욱 저하됨을 알 수 있었다.

• Applied Microscopy
• /
• 제44권4호
• /
• pp.133-137
• /
• 2014

We suggest a facile transmission electron microscopy (TEM) specimen preparation method for the direct (polymer-free) transfer of layer-area graphene from Cu substrates to a TEM grid. The standard (polymer-based) method and direct transfer method were by TEM, high-resolution TEM, and energy dispersive X-ray spectroscopy (EDS). The folds and crystalline particles were formed in a graphene specimen by the standard method, while the graphene specimen by the direct method with a new etchant solution exhibited clean and full coverage of the graphene surface, which reduced several wet chemical steps and accompanying mechanical stresses and avoided formation of the oxide metal.

• Environmental Analysis Health and Toxicology
• /
• 제31권
• /
• pp.4.1-4.2
• /
• 2016

Once released into the air, humidifier disinfectants became tiny nano-size particles, and resulted in chemical bronchoalveolitis. Families had lost their most beloved members, and even some of them became broken. Based on an estimate of two million potential victims who had experienced adverse effects from the use of humidifier disinfectants, we can say that what we have observed was only the tip of the iceberg. Problems of entire airways, as well as other systemic effects, should be examined, as we know these nano-size particles can irritate cell membranes and migrate into systemic circulation. The story of humidifier disinfectant is not finished yet.

• 한국가시화정보학회지
• /
• 제2권1호
• /
• pp.12-17
• /
• 2004

The physical characteristics of soot near the soot inception point were investigated with various measurements. In-situ measurements of particle size and volume fraction were introduced based on time resolved laser-induced incandescence (TIRE-LII) and laser-induced ion mobility (LIIM). The one has more convenience and accuracy than conventional LII technique and the other works best for particle sizes of a few nanometers at high concentrations in a uniform concentration field. A complementary ex-situ measurement of particle size is nano differential mobility analyzer (Nano-DMA), which recently developed for measuring particle sizes between 2nm and 100nm and provides high-resolution size information for early soot. Particles will be also collected on transmission electron microscope (TEM) grids using rapid thermophoretic sampling and analyzed for morphology. These measurements will allow fresh and original insight into the characterizing soot inception process. The measured physical properties of incipient soot will clarify the controlling growth mechanism combined with chemical ones, and the dominant mechanism for soot modeling can be deduced from the information.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.77-87
• /
• 2006

Micro- or nano-size particles are required to improve the combustion efficiency and stability in the case of solid explosives and propellants. The micro-structural properties of an energetic material strongly influence the combustion and explosion behavior. However, the traditional size reduction techniques, including milling, are not suitable for production of ultra-fine size particles. As an alternative to the traditional techniques, various re-crystallization processes based on supercritical fluids have recently been proposed. Supercritical fluids are fluids at temperatures and pressures above their critical point. In principle, they do not give problems of solvent contamination as they are completely released from the solute when the decompression occurs. Rapid Expansion Supercritical Solutions(RESS) and Supercritical Anti-Solvent Process(GAS/SAS) are representatives of a nano-size particle formation process of energetic materials using supercritical fluids. In this work, various fine particle formation processes using supercritical fluids are discussed and the results are presented.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.217-217
• /
• 2006

The surface energy control capability of electrohydrodynamic force provides electrospraying with various potential advantages such as simple particle size control, mono-dispersity, high recovery, and mild processing conditions. Herein, the one step nano-encapsulation of protein drugs using electrospraying was developed. The major processing parameters such as the conductivity of spraying liquids, flow rate, the distance between electric potentials, etc were examined to obtain the maximum efficiency. The recovery of particles was found relatively high as could be conjectured based on the principle of electrospraying. When organic solvents were employed, the processing windows of electrospraying were relatively narrow than water systems. Efficient nano-encapsulation of BSA with polymers was conveniently achieved using electrospraying at above 12 kV.

• 한국응용과학기술학회지
• /
• 제29권2호
• /
• pp.238-247
• /
• 2012

식품산업에서의 나노기술은 많은 연구와 가능성 있는 제품으로 새롭게 각광받는 분야이다. 나노와 마이크로 크기의 고체 입자는 유화된 오일 또는 물 입자를 함유하는 분산계의 처방에 적용 가능성이 매우 높은 것으로 인식되고 있다. 본 논문은 식용의 지방 결정, 실리카 나노 입자 및 생체 유래의 나노 결정체에 기반을 둔 식품 에멀젼의 성질과 개발에 관한 리뷰논문으로 다양한 피커링 안정화 분야에 관하여 검토하였다. 특히, 단백질로 안정화된 일반적인 에멀젼과 비교하여 Pickering 안정화 입자에 대해 초점을 맞추고자한다. 또한, 식품 산업에서 이들의 응용 예를 다루고자한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1417-1422
• /
• 2003

An electrical cascade impactor is a multistage impaction device to separate airborne particles into aerodynamic size classes using electrical method. We designed a real-time three-stage electrical low-pressure impactor, which is proper to nanometer sized environmental aerosols. Performance evaluation was carried out for stage 1 and 2. The monodisperse liquid dioctyl sebacate (DOS) particles were generated using condensation-evaporation followed by electrostatic classification using DMA (differential mobility analizer) for particles with diameters in the range of $0.04{\sim}0.8{\mu}m$. The evaluation of the electrical impactor is based on the use of two electrometers, one connected to the impaction plate of the impactor, and the other to the faraday cage as backup filter. The results showed that the experimental 50% cutoff diameters in the operation pressure were 0.53 and $0.12{\mu}m$ for stage 1 and stage 2. The effect of operation pressure on the cutoff diameter and the steepness of collection effcieicy curves is investigated.

• 청정기술
• /
• 제27권2호
• /
• pp.115-123
• /
• 2021

본 연구는 무기 실리카 껍질(shell)과 유기 고분자 코어(core)로 구성된 매우 균일한 유-무기 복합체 입자 제조의 방법에 관한 것이다. 먼저, 미세유체 기술을 이용하여 균일한 크기를 지니는 유기 고분자 코어 입자를 제조하였다. 코어 입자의 제조 과정에서 코어 입자의 제조 과정에서 광 경화성 유기 물질이 포함된 분산상과 연속상의 유속을 독립적으로 제어함으로써 균일한 액적을 형성하였다. 액적이 형성됨과 동시에, 미세유체 채널의 말단에서 자외선 조사에 의해 액적이 광중합 되어 코어 입자로 형성된다. 더불어, 폴리알릴아민 하이드로클로라이드(polyallylamine hydrochloride, PAH)와 인산 이온(phosphate ion)으로 구성된 나노 복합체는 최적화된 pH 조건에서 수소결합과 정전기적 인력 같은 강력한 상호작용을 통해 코어 입자에 코팅된다. 폴리아민 나노 복합체에 존재하는 PAH 주쇄의 아민 그룹들은 규산(silicic acid)의 축합(condensation) 반응을 촉매하여, 코어 입자 표면의 실리카 나노입자 성장을 시킬 수 있었다. 따라서, 본 방법을 통해 유기 코어에 무기 실리카 나노입자로 코팅된 유-무기 복합체 입자를 제조할 수 있었다. 최종적으로, 본 연구에서 제시한 방법은 보다 온화하며 환경친화적인 조건 하에서 단시간 내에 유-무기 복합체 입자를 합성할 수 있으며, 다양한 모양과 크기를 갖는 코어 입자에 적용되어 넓게 활용될 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.32-32
• /
• 2010

A epoxy/multilayered silicate nanocomposite was prepared by a new AC electric application method and micro silica particle was poured into the nanocomposite in order to prepare epoxy/micro-and-nano- mixed composites (EMNC). Electric insulation breakdown strength was measured in a sphere-sphere electrode system designed for the prevention of edge breakdown and the data were estimated by Weibull plot. As the exfoliated silicate nano-plates were homogeniously dispersed in the micro silica particles, the insulation property was higherd.