• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.105-115
• /
• 2008

Statement of problem: Proper finishing and polishing enhance both the esthetics and the longevity of restored teeth. Blade finishing technique would be suited for smoothing and finishing. Evaluation of this technique are necessary. Purpose: The purpose of this study was to evaluate the blade finishing and polishing procedures on the surface profile and roughness of ormocer-based composite resin and nanohybrid composite resin. Material and methods: The material included a ormocer-based composite resin ($Admira^{(R)}$ & $Admira^{(R)}$ Flow); a nanohybrid composite resin ($Grandio^{(R)}$ & $Grandio^{(R)}$ Flow). One hundred forty specimens of each group were prepared using a mylar strip and randomly divied into blade finishing and rubber polishing groups (n=10). The average surface roughness (Ra) in micrometers was measured and the surface profile was examined by scanning electron microscopy (SEM) (Magnification ${\times}$ 200). The data were analyzed by Mann-Whitney Test at 0.05 significance level. Conclusion: The results of this study indicated that the mylar strip produced the smoothest surface on all materials and among the finishing-polishing methods was not significanct difference (P>0.05). Ormocer-based flowable composite resin performedthe lowest variability in initial surface roughness among the tested materials.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.924-942
• /
• 2021

The expansion of the Changjiang Diluted Water (CDW) plume during summer is known to be a major factor influencing phytoplankton diversity, community structure, and the regional marine environment of the northern East China Sea (ECS). The discharge of the CDW plume was very high in the summer of 2020, and cruise surveys and stationary monitoring were conducted to understand the dynamics of changes in environmental characteristics and the impact on phytoplankton diversity and community structure. A cruise survey was conducted from August 16 to 17, 2020, using R/V Eardo, and a stay survey at the Ieodo Ocean Research Station (IORS) from August 15 to 21, 2020, to analyze phytoplankton diversity and community structure. The southwestern part of the survey area exhibited low salinity and high chlorophyll a fluorescence under the influence of the CDW plume, whereas the southeastern part of the survey area presented high salinity and low chlorophyll a fluorescence under the influence of the Tsushima Warm Current (TWC). The total chlorophyll a concentrations of surface water samples from 12 sampling stations indicated that nano-phytoplankton (20-3 ㎛) and micro-phytoplankton (> 20 ㎛) were the dominant groups during the survey period. Only stations strongly influenced by the TWC presented approximately 50% of the biomass contributed by pico-phytoplankton (< 3 ㎛). The size distribution of phytoplankton in the surface water samples is related to nutrient supplies, and areas where high nutrient (nitrate) supplies were provided by the CDW plume displayed higher biomass contribution by micro-phytoplankton groups. A total of 45 genera of nano- and micro-phytoplankton groups were classified using morphological analysis. Among them, the dominant taxa were the diatoms Guinardia flaccida and Nitzschia spp. and the dinoflagellates Gonyaulax monacantha, Noctiluca scintillans, Gymnodinium spirale, Heterocapsa spp., Prorocentrum micans, and Tripos furca. The sampling stations affected by the TWC and low in nitrate concentrations presented high concentrations of photosynthetic pico-eukaryotes (PPE) and photosynthetic pico-prokaryotes (PPP). Most sampling stations had phosphate-limited conditions. Higher Synechococcus concentrations were enumerated for the sampling stations influenced by low-nutrient water of the TWC using flow cytometry. The NGS analysis revealed 29 clades of Synechococcus among PPP, and 11 clades displayed a dominance rate of 1% or more at least once in one sample. Clade II was the dominant group in the surface water, whereas various clades (Clades I, IV, etc.) were found to be the next dominant groups in the SCM layers. The Prochlorococcus group, belonging to the PPP, observed in the warm water region, presented a high-light-adapted ecotype and did not appear in the northern part of the survey region. PPE analysis resulted in 163 operational taxonomic units (OTUs), indicating very high diversity. Among them, 11 major taxa showed dominant OTUs with more than 5% in at least one sample, while Amphidinium testudo was the dominant taxon in the surface water in the low-salinity region affected by the CDW plume, and the chlorophyta was dominant in the SCM layer. In the warm water region affected by the TWC, various groups of haptophytes were dominant. Observations from the IORS also presented similar results to the cruise survey results for biomass, size distribution, and diversity of phytoplankton. The results revealed the various dynamic responses of phytoplankton influenced by the CDW plume. By comparing the results from the IORS and research cruise studies, the study confirmed that the IORS is an important observational station to monitor the dynamic impact of the CDW plume. In future research, it is necessary to establish an effective use of IORS in preparation for changes in the ECS summer environment and ecosystem due to climate change.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.3
• /
• pp.117-124
• /
• 2011

Many studies of the phytoplankton community structure have been conducted using the CHEMTAX program on the basis of the photosynthetic pigment concentrations measured by a HPLC (High-Performance Liquid Chromatography) technique. The CHEMTAX program determines the contribution of each phytoplankton class to total phytoplankton biomass (chlorophyll a) based on the ratios of marker pigment to chlorophyll a of phytoplankton group. In this study, the marker pigment/chlorophyll a ratios were investigated in phytoplankton species isolated from marine waters around the Korean peninsula. These results were used as the input pigment ratios of the CHEMTAX program to investigate phytoplankton community structure in Korean coastal waters (Yeoja and Gamak Bay). There were significant differences in the ratios of marker pigment to chlorophyll a among the different species within the same algal class. There was a significant difference between the values of our ratios and the previously used ratios in other regions of the world. When phytoplankton community composition was calculated using our initial ratios in Yeoja and Gamak Bay, our results were significantly different from the results calculated on the basis of initial ratios of marker pigment in phytoplankton suggested in other marine waters. The estimates of the contributions of the major algal groups (bacillariophyceae and dinophytes) to total chlorophyll a varied within 5% depending on the initial ratios chosen. The variations of estimates for the pico- and nanoplankton (cyanophytes and prasinophytes), which have relatively low contributions to total chlorophyll a, were higher than those for major algal group. Although the HPLC-pigment measurements combined with CHEMTAX analysis are useful for identifying and qualifying phytoplankton community structure, further researches for the pigment ratios of the dominant phytoplankton species presenting in a given area are also needed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.587-592
• /
• 2010

We have fabricated schottky barrier diode (SBDs) using polar (c-plane) and non polar (a-, m-plane) n-type 6H-SiC wafers. Ni/SiC ohmic contact was accomplished on the backside of the SiC wafers by thermal evaporation and annealed for 20minutes at $950^{\circ}C$ in mixture gas ($N_2$ 90% + $H_2$ balanced). The specific contact resistance was $3.6{\times}10^{-4}{\Omega}cm^2$ after annealing at $950^{\circ}C$. The XRD results of the alloyed contact layer show that formation of $NiSi_2$ layer might be responsible for the ohmic contact. The active rectifying electrode was formed by the same thermal evaporation of Ni thin film on topside of the SiC wafers and annealed for 5 minutes at $500^{\circ}C$ in mixture gas ($N_2$ 90% + $H_2$ balanced). The electrical properties of SBDs have been characterized by means of I-V and C-V curves. The forward voltage drop is about 0.95 V, 0.8 V and 0.8 V for c-, a- and m-plane SiC SBDs respectively. The ideality factor (${\eta}$) of all SBDs have been calculated from log(I)-V plot. The values of ideality factor were 1.46, 1.46 and 1.61 for c-, a- and m-plane SiC SBDs, respectively. The schottky barrier height (SBH) of all SBDs have been calculated from C-V curve. The values of SBH were 1.37 eV, 1.09 eV and 1.02 eV for c-, a- and m-plane SiC SBDs, respectively.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.37-39
• /
• 2001

21세기의 벽두부터 국내외적으로 활발히 논의되고 있는 나노기술에 대한 정의를 생각해보는 것으로부터 우리가 나아갈 방향을 살펴보고자 한다. 나노기술이란, 원자 하나 하나 혹은 분자단위의 조작을 통해 1~100nm정도의 범위 안에서 근본적으로 새로운 물질이나 구조체를 만들어 내는 기술을 말한다. 즉 앞으로 우리는 경험해 보지 못한 새로운 현상에 대한 이해를 할 수 있어야 하고, 새로운 물질 자체를 다룰 수 있는 방법이 우리가 해야 할 구체적인 일이 될 것이란 말이 된다. 뿐만 아니라 나노기술은 종래의 정보.통신.전자 분야에서 주로 추구하던 마이크로화와 달리 재료, 기계, 전자, 의학, 약학, 에너지, 환경, 화학, 생물학, 농학, 정보, 보안기술 등 과학기술 분야 전반을 위시하여 사회분야가지 새로운 인식과 철학적인 이해가 필요하게 되었다. 21세기를 맞은 인류가 나아갈 방향을 나노세계에 대한 도전으로 보아야 하며, 과학기술의 새로운 틀을 제공할 것 임에 틀림 없다. 그러나, 이와 같은 나노기술의 출발점을 살펴보면 VLSI기술로 통칭할 수 있는 마이크로전자소자 기술이란 점이다. 국내의 VLSI기술은 메모리기술이라고 해도 과언이 아닐 것이다. 문제는 종래의 메모리기술은 대규모 투자와 집중적인 인력양성을 통해서 세계 최고 수준에 도달 할 수 있었다. 그러나 여기까지 오는 동안 사식 우리는 선진국의 뒷꽁무니를 혼신의 힘을 다해 뒤쫓아 온 결과라고 보아도 틀리지 않는다. 즉, 앞선자를 보고 뒤쫓는 사람은 갈방향과 목표가 분명하므로 최선을 다하면 따라 잡을 수 있다. 그런데 나노기술은 앞선 사람이 없다는 점이 큰 차이이다 따라서 뒷껑무니를 쫓아가는 습성을 가지고는 개척해 나갈 수 없다는 점을 깨닫지 않으면 안된다. 그런 점에서 이 시간 나노기술의 국내외 현황을 살펴보고 우리가 어떻게 할 것인가를 생각해 보는데 의미가 있을 것이다.하여 분석한 결과 기존의 제한된 RICH-DP는 실시간 서비스에 대한 처리율이 낮아지며 서비스 시간이 보장되지 못했다. 따라서 실시간 서비스에 대한 새로운 제안된 기법을 제안하고 성능 평가한 결과 기존의 RICH-DP보다 성능이 향상됨을 확인 할 수 있었다.(actual world)에서 가상 관성 세계(possible inertia would)로 변화시켜서, 완수동사의 종결점(ending point)을 현실세계에서 가상의 미래 세계로 움직이는 역할을 한다. 결과적으로, IMP는 완수동사의 닫힌 완료 관점을 현실세계에서는 열린 미완료 관점으로 변환시키되, 가상 관성 세계에서는 그대로 닫힌 관점으로 유지 시키는 효과를 가진다. 한국어와 영어의 관점 변환 구문의 차이는 각 언어의 지속부사구의 어휘 목록의 전제(presupposition)의 차이로 설명된다. 본 논문은 영어의 지속부사구는 논항의 하위간격This paper will describe the application based on this approach developed by the authors in the FLEX EXPRIT IV n$^{\circ}$EP29158 in the Work-package "Knowledge Extraction & Data mining"where the information captured from digital newspapers is extracted and reused in tourist information context.terpolation performance of CNN was relatively better than NN.콩과 자연 콩이 성분 분석에서 차이를 나타내지 않았다는 점, 네 번째. 쥐를 통한 다양섭취 실험에서 아무런 이상 반응이 없었다는 점등의 결과를 기준으로 알레르기에 대한 개별 검사 없이 안전한

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.165-165
• /
• 2017

모돈은 사육 특성상 제한된 파일롯 공간 안에 장시간 머물기 때문에 과중한 몸무게에 의한 지제 이상, 섭식 등의 불량, 수면상태의 불량 등을 지속적으로 관찰해야 하는 대상이다. 측면에 다수의 초음파 센서를 설치하여 기립의 상태 및 운동 시 몸체 궤적의 특성을 분석하여 종합적으로 모돈의 행동 특성을 정량화 하고자 하였다. 이 과정에서 계측 신호의 값을 대수적으로 비교하는 방식에 한계가 있음을 발견하였고, 이를 해결하고자 10 Hz/Ch 내외의 시계열 상대거리 궤적 신호를 주파수 도메인으로 변경하여 분석을 수행하였다. 일정 주파수에 집중되어 있는 주파수 값의 크기 변화(파워 스펙트럼 밀도)를 기준으로 모돈의 움직임의 정상 상태 유무 판별이 가능하였다. 단, 이러한 분석은 계측 데이터를 일괄 처리 방식으로 분석하는 방법으로 도출이 되었으므로, 계측과 정량 분석을 동시에 수행하기 위한 개선이 필요하였다. 계측 시스템에서 사용한 마이크로 프로세서는 Nucleo-446(STMelectronics, CA, USA)로 180 Mhz의 클럭 속도로 작동하나, 총 100 Hz 내외의 16비트 계측 신호에 대해 추가적으로 FFT 등의 주파수 변환 신호 처리를 수행하기에는 연산 능력이 부족하였다. 한편, 주파수 분석의 주기를 1분 단위로 할 경우 처리해야할 정보의 크기는 $100{\times}60{\times}5{\times}2Byte$ 이므로 1분 내에 해당 연산을 종료할 수 있는 추가의 연산 장치가 필요하였다. 계측과 주파수 도메인 변환 연산을 동시에 수행하기 위하여 1 Ghz의 연산능력을 가진 ARM A9 계열의 초소형 멀티코어 AP인 NanoPi Neo Air(Friendlyarm, Guangzhou, China)을 선정하였다. 4개의 코어를 각각 계측, Median 필터링, Smoothing 연산, FFT 분석에 사용하여 1분 단위, 2분 단위, 5분 단위의 주파수 분석을 동시에 수행하였다. 병렬 연산 라이브러리는 오픈 소스인 MPICH(www.mpich.org)를 이용하였다. 상대적으로 여유있는 자원을 보유하고 코어를 실시간으로 결정하여 다수의 모돈 개체 동시 모니터링을 위한 네트워크 연결 역할을 동시에 수행하도록 하였다. 1주일 내외의 요인 실험 수행 결과, 약 70 Mbyte의 데이터가 축적이 되었으며, 1분 단위, 2분 단위, 5분 단위의 주파수 도메인 변환 후 결과를 동시에 취득할 수 있었다. 일부 주파수 도메인 상의 파워 밀도 값이 모돈의 행동 특성에 분석에 유효한 정보를 제공함을 발견하였다. 모돈사 내 현장 보급이 가능한 초소형 AP와 멀티 코어 기반 병렬 처리 기법을 이용한 현장 진단 시스템 개발 연구를 지속적으로 수행할 것이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.113-114
• /
• 2009

Silicon carbide is one of the most attractive and promising wide band-gap semiconductor material with excellent physical properties and huge potential for electronic applications. Up to now, the most successful method for growth of large SiC crystals with high quality is the physical vapor transport (PVT) method [1, 2]. Since further reduction of defect densities in larger crystal are needed for the true implementation of SiC devices, many researchers are focusing to improve the quality of SiC single crystal through the process modifications for SiC bulk growth or new material implementations [3, 4]. It is well known that for getting high quality SiC crystal, source materials with high purity must be used in PVT method. Among various source materials in PVT method, a SiC powder is considered to take an important role because it would influence on crystal quality of SiC crystal as well as optimum temperature of single crystal growth, the growth rate and doping characteristics. In reality, the effect of powder on SiC crystal could definitely exhibit the complicated correlation. Therefore, the present research was focused to investigate the quality difference of SiC crystal grown by conventional PVT method with using various SiC powders. As shown in Fig. 1, we used three SiC powders with different particles size. The 6H-SiC crystals were grown by conventional PVT process and the SiC seeds and the high purity SiC source materials are placed on opposite side in a sealed graphite crucible which is surrounded by graphite insulation[5, 6]. The bulk SiC crystal was grown at $2300^{\circ}C$ of the growth temperature and 50mbar of an argon pressure. The axial thermal gradient across the SiC crystal during the growth is estimated in the range of $15\sim20^{\circ}C/cm$. The chemical etch in molten KOH maintained at $450^{\circ}C$ for 10 min was used for defect observation with a polarizing microscope in Nomarski mode. Electrical properties of bulk SiC materials were measured by Hall effect using van der Pauw geometry and a UV/VIS spectrophotometer. Fig. 2 shows optical photographs of SiC crystal ingot grown by PVT method and Table 1 shows electrical properties of SiC crystals. The electrical properties as well as crystal quality of SiC crystals were systematically investigated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.5
• /
• pp.218-224
• /
• 2011

LAS ($Li_2O-Al_2O_3-SiO_2$) ceramics were sintered by a solid-state reaction. $CaCO_3$ and $ZrO_2$ were added to the ${\beta}$-spodumene ($Li_2O-Al_2O_3-4SiO_2$) composition of the LAS system for enhancement of sintering behavior and mechanical strength, respectively. We have investigated the sintering characteristics, microstructures, mechanical properties and thermal expansion characteristics according to the change of the amount of additive and sintering temperature of the ${\beta}$-spodumene. At 0.1 mol% $CaCO_3$, the densification of ${\beta}$-spodumene was significantly improved. At 0.04 mol% $ZrO_2$, the strength of ${\beta}$-spodumene was also improved. For all the selected all compositions, the thermal expansion coefficient was measured by a dilatometer, which revealed 1.2 to $1.7{\times}10^6/^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.3
• /
• pp.107-115
• /
• 2009

Particular interest in the role of convection in vapor crystal growth has arisen since some single crystals under high gravity acceleration of $10g_0$ appear considerably larger than those under normal gravity acceleration ($1g_0$). For both ${\Delta}T=60\;K$ and 90 K, the mass flux increases by a factor of 3 with increasing the gravity acceleration from $1g_0$ up to $10g_0$. On the other hand, for ${\Delta}T=30\;K$, the flux is increased by a factor of 1.36 for the range of $1g_0{\leq}g{\leq}10g_0$. The maximum growth rates for $1g_0$, $4g_0$, $10g_0$ appear approximately in the neighborhood of y = 0.5, and the growth rates shows asymmetrical patterns, which indicate the occurrence of either one single or more than one convective cell. The maximum growth rate for $10g_0$ is nearly greater than that for $1g_0$ by a factor of 2.0 at $P_B=20\;Torr$. For three different gravity levels of $1g_0$, $4g_0$ and $10g_0$, the maximum growth rates are greater than the minimum rates by a factor of nearly 3.0, based on $P_B=20\;Torr$. The mass flux increases with increasing the gravity acceleration, for $1g_0{\leq}g_y{\leq}10g_0$, and decreases with increasing the partial pressure of component B, xenon (Xe), $P_B$. The $|U|_{max}$ is directly proportional to the gravity acceleration for $20\;Torr{\leq}P_B{\leq}300\;Torr$. As the partial pressure of $P_B$ (Torr) decreases from 300 Torr to 20 Torr, the slopes of the $|U|_{max}s$ versus the gravity accelerations increase from 0.1 sec to 0.17 sec. The mass flux of $Hg_2Cl_2$ is exponentially decayed with increasing the partial pressure of component B, $P_B$ (Torr) from 20 Torr up to 300 Torr.

• Journal of Life Science
• /
• v.22 no.6
• /
• pp.730-735
• /
• 2012

Existing pharmaceutical studies show that Magnolia biondii is effective in treating rhinitis and in reducing cholesterol, given its endogenous, volatile ingredients. The study herein seeks to assess the cosmeceutical activities and anti-inflammatory activities of Magnolia biondii extracts for possible application as cosmetic ingredients. The cosmeceutical and anti-inflammatory activities were investigated using hydroxyl radical scavenging, superoxide dismutase (SOD)-like activity, xanthine oxidase (XO) inhibition, cell viability, nitric oxide (NO) inhibition, and inducible nitric oxide synthase (iNOS) expression by Western blotting. Magnolia biondii extracts were identified to have antioxidant activities in hydroxyl free radical scavenging, SOD-like activity, and XO inhibition. In testing the anti-inflammatory activities of the extracts, NO production was inhibited in a dose-dependent manner. Additionally, in a dose-dependent manner, the Magnolia biondii extracts were able to suppress iNOS expression in LPS-stimulated RAW 264.7 macrophage cells. From these results, Magnolia biondii showed adequate potential for application in cosmetic production and related industries as well as a functional material.