• Journal of Information Display
• /
• 제10권3호
• /
• pp.131-136
• /
• 2009

This is a report on the fabrication of a flexible OTFT backplane for electrophoretic display (EPD) using a printing technology. A practical printing technology for a polycarbonate substrate was developed by combining the conventional screen and inkjet printing technologies with the wet etching and oxygen plasma processes. For the gate electrode, the screen printing technology with Ag ink was developed to define the minimum line width of ${\sim}5{\mu}m$ and the thickness of ${\sim}70nm$ with the resistivity of ${\sim}10^{-6}{\Omega}{\cdot}cm$, which are suitable for displays with SVGA resolution. For the source and drain (S/D) electrodes, PEDOT:PSS, whose conductivity was drastically enhanced to 450 S/cm by adding 10 wt% glycerol, was adopted. In addition, the modified PEDOT:PSS could be neatly confined in the specific S/D electrode area that had been pretreated with oxygen. The OTFTs that made use of the developed printing technology produced a mobility of ${\sim}0.13cm^2/Vs.ec$ and an on/off current ratio of ${\sim}10^6$, which are comparable to those using thermally evaporated Au for the S/D electrode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.413-413
• /
• 2008

최근 잉크젯, 스크린, 그라비아 등 기존의 인쇄 방식과 인쇄 기술을 이용하여 저가의 전자회로 혹은 전자 소자를 제조하고자 프린팅 소재 및 공정 개발에 대한 산업계의 관심이 증가하고 있다. 특히 PCB, RFID, 디스플레이, 태양전지 분야의 전극재료의 개발에 많은 연구가 진행 중에 있으며, 다양한 인쇄 방법 중 미세회로의 구현이 가능한 잉크젯 프린팅을 통한 전극 형성방법에 주목하고 있다. 본 연구는 잉크젯 프린팅 방식을 통해 배선을 형성하고자 이에 적합한 다양한 농도의 잉크를 배합하여 평가하였으며, 첨가제 및 소결, 건조 조건의 변화를 통해 기재와의 부착력, 배선의 크랙을 조절하였다.

• 한국입자에어로졸학회지
• /
• 제8권1호
• /
• pp.37-43
• /
• 2012

In this study, we designed a 'spark in liquid' system. The spark discharge between two electrodes were used to generate particles by using sufficient temperature to evaporate a part of electrodes. The power supply system provides a continuous spark discharge by discharging of the capacitor to ionize the electrodes in liquid. The DC spark discharge system operates with 1-10 kV voltage. Processed copper and graphite rods were used to both electrodes with 1-3 mm diameter. There are several variables which can control the particle size and concentration such as gap distance between electrodes, applied voltage, operating liquid temperature, electrode type and liquid type. So we controlled these variables to confirm the change of particle size distribution and concentration of particles contained in liquid as wt%. 'spark in liquid' system is expected to apply nanoink by control of concentration with analysis of characteristics.

• 한국전기전자재료학회논문지
• /
• 제24권1호
• /
• pp.12-16
• /
• 2011

In this study, we fabricated the flexible pentacene TFTs with the polymer gate dielectric and contact printing method by using the silver nano particle ink as a source/drain material on plastic substrate. In this experiment, to lower the cross-linking temperature of the PVP gate dielectric, UV-Ozone treatment has been used and the process temperature is lowered to $90^{\circ}C$ and the surface is optimized by various treatment to improve device characteristics. We tried various surface treatments; $O_2$ Plasma, hexamethyl-disilazane (HMDS) and octadecyltrichlorosilane (OTS) treatment methods of gate dielectric/semiconductor interface, which reduces trap states such as -OH group and grain boundary in order to improve the OTFTs properties. The optimized OTFT shows the device performance with field effect mobility, on/off current ratio, and the sub-threshold slope were extracted as $0.63cm^2 V^{-1}s^{-1}$, $1.7{\times}10^{-6}$, and of 0.75 V/decade, respectively.

• 한국전자파학회논문지
• /
• 제26권1호
• /
• pp.47-53
• /
• 2015

본 논문은 미세유체채널에 채워진 유체를 이용하여 위상응답을 제어하는, 잉크젯 프린터로 인쇄된 미세유체채널 복합 좌 우향 전송선로(CRLH TL: Composite Right/Left Handed Transmission Line)를 제안한다. 제안된 CRLH TL은 종이 위에 은 나노입자 잉크를 이용하여 인쇄되었으며, Poly Methyl Methacrylate(PMMA)에 레이저 식각을 이용하여 제작된 미세유체채널은 잉크젯 프린터로 인쇄된 접착물질인 SU-8을 이용하여 CRLH TL 위에 부착되었다. 제안된 CRLH TL은 미세유체채널에 채워진 유체에 따라서 위상응답을 변화시킬 수 있으며, 미세유체채널에 각기 다른 유체가 흐를 때, 900 MHz에서 -10 dB 이하의 반사계수를 유지한 상태로 위상 지연, $0^{\circ}$ 위상, 위상 앞섬 특성을 모두 나타낼 수 있음을 확인하였다. 제안된 CRLH TL의 성능은 시뮬레이션 결과와 측정 결과를 통하여 성공적으로 증명되었다.

• 한국진공학회지
• /
• 제20권2호
• /
• pp.146-154
• /
• 2011

접착테이프 형태의 액체누설 감지 필름 센서와 이를 이용하고 경보 장치를 포함한 감지 시스템을 개발하였다. 액체누설 감지 필름형 테이프 센서는 베이스 필름층, 전도성 라인층, 보호 필름층으로 구성되며, 테이프의 두께 $300{\sim}500{\mu}m$, 폭 3.55 cm, 그리고 단위 테이프의 길이는 200 m이다. 전도성 라인층의 필름에는 3개의 전도선과 1개의 저항선이 있다. 이들은 도전성 은나노 잉크를 전자인쇄방식으로 설치한다. 이들 저항선과 전도선 사이에 액체가 누설되어 전기적으로 상호 통전되면, 두 선사이의 저항변화를 전압의 변화로 계측하여 누설 위치를 감지한다. 물을 포함한 전도성 액체에 대한 누설 위치 감지에서 길이 200 m에서 오차 범위는 ${\pm}1m$ 이내이다.

• Tribology and Lubricants
• /
• 제39권5호
• /
• pp.197-202
• /
• 2023

Recently, research on experimental and analytical techniques utilizing microfluidic devices has been pursued. For example, lab-on-a-chip devices that integrate micro-devices onto a single chip for processing small sample quantities have gained significant attention. However, during sample preparation, unnecessary gases can be introduced into the internal channels, thus, impeding device flow and compromising specific function efficiency, including that of analysis and separation. Several methods have been proposed to mitigate this issue, however, many involve cumbersome procedures or suffer from complexities owing to intricate structures. Recently, some approaches have been introduced that utilize hydrophobic device structures to remove gases within channels. In such cases, the permeability of gases passing through the structure becomes a crucial performance factor. In this study, a method involving the deposition and sintering of diluted Ag-ink onto a silicon wafer surface is presented. This is followed by unstructured nano-pattern creation using a Metal Assisted Chemical Etching (MACE) process, which yields a nanostructured surface with unstructured pillar shapes. Subsequently, gas permeability in the spaces formed by these surface structures is investigated. This is achieved by experiments conducted to incorporate a pressure chamber and measure gas permeability. Trends are subsequently analyzed by comparing the results with existing theories. Finally, it can be confirmed that the significance of this study primarily lies in its capability to effectively evaluate gas permeability through unstructured pillar-like nanostructures, thus, providing quantitative values for the appropriate driving pressure and expected gas removal time in practical device operation.