• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.297-302
• /
• 2009

We have successfully fabricated the alumina thick films using inkjet printing processes without a high temperature sintering process. Alumina suspension as dielectric ink was formulated by combining nano-sized alumina powders with an anionic polymer dispersant in formamide/water as co-solvent. The thickness of the printed alumina thick film was measured at around 5 um by field emission scanning electron microscope. The calculated packing density of 68.5 % from the printed alumina thick film was much higher than the same films fabricated by conventional casting or dip coating processes. Q factor of the dielectrics thick film infiltrated with cyanate ester resin was evaluated by impedance analyzer.

• 전기화학회지
• /
• 제10권2호
• /
• pp.88-93
• /
• 2007

Nano-sized Sn particles were coated with Ni-P layer using an electroless deposition method and their anodic performance was tested for lithium secondary batteries. Uniform coating layers were obtained, of which the thickness was controlled by varying the $Ni^{2+}$ concentration in the plating bath. It was found that the Ni-P layer plays two important roles in improving the anodic performance of Sn powder electrode. First, it prevents the inter-particle aggregation between Sn particles during the charge/discharge process. Second, it provides an electrical conduction pathway to the Sn particles, which allows an electrode fabrication without an addition of conductive carbon. A pseudo-optimized sample showed a good cyclability and high capacity ($>400mAh\;g^{-1}$) even without conductive carbon loading.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.971-976
• /
• 2012

Silica-coated Au with Ag, Co, Cu, and Ir bimetallic radioisotope nanoparticles were synthesized by neutron irradiation, after coating $SiO_2$ onto the bimetallic particles by the sol-gel St$\ddot{o}$ber process. Bimetallic nanoparticles were synthesized by irradiating aqueous bimetallic ions at room temperature. Their shell and core diameters were recorded by TEM to be 100 - 112 nm and 20 - 50 nm, respectively. The bimetallic radioisotope nanoparticles' gamma spectra showed that they each contained two gamma-emitting nuclides. The nanoparticles could be used as radiotracers in petrochemical and refinery processes that involve temperatures that would decompose conventional organic radioactive labels.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1582-1584
• /
• 2008

This paper reports a simple fabrication method for creating the superhydrophobic polymer surface using a plasma etching. Generally, it is necessary for the superhydrophobic surfaces to have a rough structure on surface with the composition of the low surface energy. In this study, Poly(methyl methacrylate) (PMMA), poly(ethylene terephthalate) (PET), acrylonitrile butadiene styrene (ABS) with superhydrophobic surface were fabricated using $O_2$ plasma etching and vapor deposition with the fluoroalkylsilane self-assembled monolayers. The plasma treated polymer surfaces are covered with the nano-pillar shaped structures after treatment for $1{\sim}2min$. And these samples with FOTS SAMs coating are showed the superhydrophobicity having the water contact angle of around $150^{\circ}$ and sometimes around $180^{\circ}$ depending on the treatment time. Furthermore the nanostructured polymer is transparent for the visible light.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.369-376
• /
• 2007

우리는 마이카, boron nitride, bismuthoxychloride와 같은 판상 분체에 ZnO 나노입자를 코팅한 고 기능성 무기 분체를 합성하였다. 본 실험에서 우리는 수열침전법을 이용하여 합성 분체를 합성하였다. 출발물질은 $ZnCl_2$를 사용하였고 침전제로는 hexamethylenetetramine(HMT)와 urea를 사용하였다. 본 실험의 반응변수로는 출발물질의 농도, 침전제 및 반응온도를 변화시켜 실험하였다. 합성물의 형태, 결정성 및 UV-차단능은FE-SEM, XRD, FT-IR, TGA-DTA, in vitro SPF 테스트를 활용해 분석하였다. 본 실험의 결과, 나토입자 크기를 갖는 ZnO는 동일한 최적의 합성조건하에서 다양한 판상 분체의 종류에 관계없이 균일하게 코팅되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.295-295
• /
• 2010

Nanoparticles of the compound semiconductor, Cu(In, Ga)Se2 (CIGS), were synthesized in solution under ambient pressure below $100^{\circ}C$ and characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), optical absorption spectroscopy and energy-dispersive X-ray (EDX) analyses. These materials have chalcopyrite crystal structures and the particle sizes less than 100 nm. Synthetic conditions were studied for the crystallized CIGS nanoparticles formation to prevent from side products of Cu2Se, Cu2-xSe, and CuSe etc. The single phase CIGS nanoparticles were applied to coating of thin films photovoltaic cells. The electro deposition of CIGS thin films is also a good non-vacuum technology and under investigation. In aqueous solutions, the different chemical compositions of CIGS thin films were obtained, depending on pH, concentration of starting materials and deposition potentials. The surface morphology of the prepared CIGS thin films depends on the complexing ligands to the solutions during the electrochemical deposition.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.17-21
• /
• 2013

Sn whiskers are one of the serious causes of the failure of electronics. Sn whiskers grow spontaneously from Sn-based, lead-free finished surfaces, even at room temperature. A primary factor of these Sn whiskers growth is compressive stress, which enhances the diffusion of Sn or other elements. The sources of compressive stress are the growth of non-uniform large intermetallic compounds along the interface between the Sn grain boundary and Cu substrate. Recent studies revealed the methods for reducing Sn whisker growth. This paper gives an overview about recent researches for mitigation methods of Sn whisker growth during nearly room temperature storage.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.174-178
• /
• 2001

The microstructure and mechanical properties of $Si_3N_4/BN $nanocomposites synthesized by chemical processing were investigated. The nanocomposites containing 15 vol% hexagonal BN (h-BN) were fabricated by hot-pressing $\alpha-Si_3N_4$powders covered with turbostratic BN (t-BN). The t-BN coating on $\alpha-Si_3N_4$particles was prepared by heating $\alpha-Si_3N_4$ particles covered with a mixture of boric acid and urea in hydrogen gas. TEM observations of this nanocomposite revealed that nano-sized h-BN particles were homogeneously dispersed within $Si_3N_4$grains as well as at grain boundaries. The strength and thermal shock resistance were significantly improved in comparison with the $Si_3N_4/BN$ microcomposites.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.66-67
• /
• 2012

As polymer coatings of nano-structured surface become significant to obtain functionalized materials, catechol derived from a mussel protein has attracted increasing attention for its universal adhesiveness. In addition to the unique adhesion property, its reducing ability of metal ions during oxidative polymerization to polydopamine (pD) widely expands the application of catechol molecules in the field of surface modification. In this study, we present the catechol conjugated smart polymer coatings for regulating surface properties such as wettability and anti-fouling effects. In additino, the in situ silver coating of electrospun polymer nanofibers using a silver-catechol redox reaction is presented as a simple method to produce metal nanostructures.

• 한국결정학회지
• /
• 제19권1호
• /
• pp.25-30
• /
• 2008

In order to characterize the optical properties of CdS thin films and CdS powders, the following experiments were performed: CdS wurtzite thin films were made using 99.99% CdS (Aldrich) powder and the $AlO_x$ membranes in $7{\times}10^{-6}$ torr(here, the average vacuum coating speed is $1{\AA}/sec$.). The surface states of CdS nano-particles with dimensions of 3.87 nm were studied through the fluorescence spectroscopy. From the resulting spectra exhibited, we can see a sharp fluorescence at 451 nm arising from the excitons on the CdS thin films, compared with the 448nm peak of the CdS powders.