DOI QR코드

DOI QR Code

Structure and Properties of Polymer Infiltrated Alumina Thick film via Inkjet Printing Process

잉크젯 프린팅 공정에 의한 유전체 후막의 제조 및 특성

  • 장헌우 (요업기술원 미래융복합세라믹본부) ;
  • 구은회 (요업기술원 미래융복합세라믹본부) ;
  • 김지훈 (요업기술원 미래융복합세라믹본부) ;
  • 김효태 (요업기술원 미래융복합세라믹본부) ;
  • 윤영준 (요업기술원 미래융복합세라믹본부) ;
  • 황해진 (인하대학교 세라믹공학과) ;
  • 김종희 (요업기술원 미래융복합세라믹본부)
  • Published : 2009.04.01

Abstract

We have successfully fabricated the alumina thick films using inkjet printing processes without a high temperature sintering process. Alumina suspension as dielectric ink was formulated by combining nano-sized alumina powders with an anionic polymer dispersant in formamide/water as co-solvent. The thickness of the printed alumina thick film was measured at around 5 um by field emission scanning electron microscope. The calculated packing density of 68.5 % from the printed alumina thick film was much higher than the same films fabricated by conventional casting or dip coating processes. Q factor of the dielectrics thick film infiltrated with cyanate ester resin was evaluated by impedance analyzer.

Keywords

References

  1. S. Jung, D. Kim, and J. Moon, 'Ink-jet-printed organic-inorganic hybrid dielectrics for organic thin-film transistors', J. Phys. Chem. C, Vol. 112, p. 5245, 2008 https://doi.org/10.1021/jp711786e
  2. B. Derby and N. Reis, 'Inkjet printing of highly loaded particulate suspensions', MRS Bulletin, Vol. 28, p. 815, 2003 https://doi.org/10.1557/mrs2003.230
  3. J. Moon, J.-E. Grau, V. Knezevic, M.-J. Cima, and E.-M. Sachs, 'Ink-jet printing of binders for ceramic components', J. Am. Ceram. Soc., Vol. 85, p. 755, 2002 https://doi.org/10.1111/j.1151-2916.2002.tb00168.x
  4. F. Girard, M. Antoni, S. Faure, and A. Steinchen, 'Evaporation and marangoni driven convection in small heated water droplets', Langmuir, Vol. 22, p. 11085, 2006 https://doi.org/10.1021/la061572l
  5. J. Gurauskis, C. Baudin, and A. J. S $\'{a}$nchez- Herencia, 'Tape casting of Y-TZP with low binder content', Ceramics International, Vol. 33, p. 1099, 2007 https://doi.org/10.1016/j.ceramint.2006.03.014