• 보존과학연구
• /
• 통권7호
• /
• pp.278-291
• /
• 1986

In this report the practical case of Viking ship's conservation in Denmarke specially among the Eurpoean nations is introduced. The contents of it are summarized as follows :From 1957 to 1962 the Danish National Museum Salvaged five Viking ships from the bottom of Roskilde Fjord, Which were composed of the pieces of timber whose surface was soft because they had lain on the sea bed for about a thousand years. Excavation had been carried out in the same way as in the field by driving down a sheet piling around the wrecks and pumping the water out. These pieces of the wreck ships were packed in airtight plastic bags one by one to be transported for Brede and then immidiately had to go through the treatment for conservation. The conservation treatment process for the pieces includes three steps ; the preliminary process prior to the hardening treatment, the hardening and the assemble of the ships. In the first step ; the preliminary process, all remains of mud and shells from the fjord bed are washed off, and measuring followed ; every single piece of wreckage was drawn so that the form and size of the piece, nail holes, and breaks were registered before conservation. In the second ; the hardening treatment step, the pieces of the woreckage were filled with P.E.G. This Polyethylene Glycol method was the best to handle in the subsequent mounting of the ships in the museum. In the final, the Glycol-treated pieces were pieced together to spips with support of a system of reinforcements. They were to fit in place after corrections of the form were made several times.

• 한국융합학회논문지
• /
• 제8권1호
• /
• pp.89-96
• /
• 2017

본 연구의 목적은 치과임상에서 불소 바니쉬 선택 시 고려해야 할 정보를 제공하고자 국내에서 사용하는 모든 불소 바니쉬를 선정하여 초기우식병소의 재광화 효과를 분석하고자 하였다. 7종의 불소 바니쉬를 무작위 배분하여 영구치(56)는 7종(CS, MI, CW, VV, EP, FP, FN)을, 유치(20)는 그중 CS, MI, CW, FP를 사용하였다. 시편은 네일바니쉬로 $3{\times}3mm^2$ 윈도우 형성 후 4일간 탈회시키고, 영구치와 유치로 구분하여 불소 바니쉬 도포 후 1주간 인공타액에서 교반하였다. QLF-D을 이용하여 우식 병소크기 변화를 분석한 결과, 영구치에서 바니쉬 도포전에 비해 도포 후 CS(4,64), MI(4.86), CW(4.50), EP(5.50)바니쉬가 ${\Delta}F$값이 감소하였고, 유치에서 FP(3.00), MI(3.00)바니쉬에서 재광화 효과가 나타났다. 그러므로 MI바니쉬는 치과임상에서 성인과 아동 모두에게 우식예방을 위한 불소도포 제제로 유용하게 활용될 수 있을 것이다.

• 전자공학회논문지S
• /
• 제35S권6호
• /
• pp.66-71
• /
• 1998

본 연구에서 피부계통의 진단에 이용될 수 있는 고해상도 영상진단기를 개발하였으며 개발된 영상진단기는 sector scanning 방식으로서 A-mode, B-mode, M-mode의 80${\mu}m$ 축방향, 250${\mu}m$ 축방향 해상도로 $5mm {\times} 5mm$의 인체 단면 영상을 초당 20frame으로 나타낸다. 이 영상장치는 대부분의 피부학(dermatology) 계통의 질환에 그 병리학적인 연구에 이용될 수 있을 뿐만 아니라 안과(ophthalmology)나 치과(odontology) 계통의 병리학적인 판단에도 도움을 줄 수 있다고 생각되며 또한 피부미용(dermato-cosmetology)을 위한 분야에도 응용 가능하다.

• 대한화장품학회지
• /
• 제32권1호
• /
• pp.1-6
• /
• 2006

우리나라의 화장품법상 유형분류를 기준으로 수출입 통계에서 사용되는 HS 코드를 맵핑하여 통합분류를 통한 2004년 국내 시장분석을 실시하였다. 내수 규모(생산액 - 수출액 + 수입액)는 3,272 십억원으로서 2003년 대비 5.6% 감소하였다. 국내 화장품 생산실적은 2003년 대비 0.6% 감소되었고 수입은 4.4% 감소하였으나 수출은 55.7% 증가하였다. 수출품목 중 면도용과 두발용 화장품이 높은 증가율을 보였다. 내수실적은 방향용, 염모용, 메이크업용 등의 감소가 두드러졌으며 어린이용, 매니큐어용 두 품목만이 증가하였다. 수입제품 점유율(=수입액/내수액)은 17.8%로서 2003의 18.0%에 이어 정체되고 있는 경향이다. 유형별로는 방향용(79.6%), 염모용(27.6%) 및 목욕용(26.6%)의 점유율이 높았다.

• Archives of Plastic Surgery
• /
• 제39권5호
• /
• pp.546-550
• /
• 2012

Background This study was designed to introduce the feasibility of toe tissue transfer without venous outflow for fingertip reconstruction. Methods Five cases of fingertip defects were treated successfully with this method. Four cases were traumatic fingertip defects, and one case was a hook-nail deformity. The lateral pulp of a great toe or medioinferior portion of a second toe was used as the donor site. An arterial pedicle was dissected only within the digit and anastomosis was performed within 2 cm around the defect margin. The digital nerve was repaired simultaneously. No additional dissection of the dorsal or volar pulp vein was performed in either the donor or recipient sites. Other surgical procedures were performed following conventional techniques. Postoperative venous congestion was monitored with pulp temperature, color, and degree of tissue oxygen saturation. Venous congestion was decompressed with a needle-puncture method intermittently, but did not require continuous external bleeding for salvage. Results Venous congestion was observed in all the flaps, but improved within 3 or 4 days postoperatively. The flap size was from $1.5{\times}1.5cm^2$ to $2.0{\times}3.0cm^2$. The mean surgical time was 2 hours and 20 minutes. A needle puncture was carried out every 2 hours during the first postoperative day, and then every 4 hours thereafter. The amount of blood loss during each puncture procedure was less than 0.2 mL. In the long-term follow-up, no flap atrophy was observed. Conclusions When used properly, the free toe tissue transfer without venous anastomosis method can be a treatment option for small defects on the fingertip area.

• Archives of Plastic Surgery
• /
• 제42권6호
• /
• pp.753-760
• /
• 2015

Background A number of conditions can alter a person's fingernail configuration. The ratio between fingernail width and length (W/L) is an important aesthetic criterion, and some underlying diseases can alter the size of the fingernail. Fingernail curvature can be altered by systemic disorders or disorders of the fingernail itself. Although the shape and curvature of the fingernail can provide diagnostic clues for various diseases, few studies have precisely characterized normal fingernail configuration. Methods We measured the W/L ratio of the fingernail, transverse fingernail curvature, hand length, hand breadth, and distal interphalangeal joint width in 300 volunteers with healthy fingernails. We also investigated whether age, sex, height, and handedness influenced the fingernail W/L ratio and transverse fingernail curvature. Results In women, fingernail W/L ratios were similar across all five fingers, and were lower than those in men. The highest value of transverse fingernail curvature was found in the thumb, followed by the index, middle, ring, and little fingers. Handedness and aging influenced transverse fingernail curvature, but not the fingernail W/L ratio. Fingernails were flatter on the dominant hand than on the non-dominant hand. The radius of transverse fingernail curvature increased with age, indicating that fingernails tended to flatten with age. Conclusions Our quantitative data on fingernail configuration can be used as a reference range for diagnosing various diseases and deformities of the fingernail, and for performing reconstructive or aesthetic fingernail surgery.

• Journal of Biosystems Engineering
• /
• 제38권3호
• /
• pp.215-221
• /
• 2013

Purpose: Opuntia Humifusa has been used in the food and beauty industry after removing spines and glochids clearly. This study compared the methods used in removing spines and analyzed the design factors for developing a spine removal device. Method: This study compared the spine removal ratios in accordance with the length of brush, water spray pressure, the number of water spray, and the size of Opuntia Humifusa in a rotating brush device and a water spray device. In addition, this study compared the reversal ratios according to the inclination angle of a conveyor, the drop height of Opuntia Humifusa, and the speed of the conveyor to analyze the reversal factors. Results: The spines were not removed clearly in the rotating brush method, and the glochids were nailed deeply. The spine removal ratio was 96.9% with the water spray pressure of 20 $kgf/cm^2$ and the conveyor speed of 10 cm/s in the water spray method. The number of water spray was correlated with the spine removal ratio, and the average spine removal ratio was 95.6% with three cycles of water spray. The reversal ratio was 97% with the inclination angle of the conveyor $20^{\circ}$, the drop height of 380 mm, and the conveyor speed of 10 cm/s. Conclusions: In order to develop a Opuntia humifusa spine removing device, this study compared the rotating brush and water spray methods. As a result, each spine removal performance of the rotating brush and water spray methods was 96.9% and 95.6%, respectively. Although the performance of the rotating brush method was slightly higher than that of the water spray method, the water spray method was suitable for removing spines from stem because the epidermis of stem was damaged and the glochids were nail deeply in the rotating brush method. Further studies on appropriate arrangement of spray nozzles, maintaining the optimal water spray pressure, the speed and angle control of the feeding conveyor, and devices for inducing the stem to the center will be needed in combining the water spray device and the reversal device.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.547-556
• /
• 2019

Thinned, small larch logs have small diameters and no value-added final use, except as wood chips, pallets, or fuel wood, which are products with very low economic value; however, their mechanical strength is suitable for structural applications. In this study, small larch logs were sawed, dried, and cut into square timbers (with a $90mm{\times}90mm$ cross section) that were laterally glued to form core panels used to manufacture cross-laminated timber (CLT) wall panels. The surface and back of these core panels were covered with 12-mm-thick structural plywood panels, used as cross bands to obtain three-ply CLT wall panels. This attachment procedure was conducted in two different ways: gluing and pressing (CGCLT) or gluing and nailing (NGCLT). The size of the as-manufactured CLT panels was $1,220mm{\times}2,440mm$, the same as that of the plywood panels. The final wall panels were tested under lateral shear force in accordance with KS F 2154. As the lateral load resistance test required $2,440mm{\times}2,440mm$ specimens, two CLT wall panels had to be attached in parallel. In addition, the final CLT panels had tongued and grooved edges to allow parallel joints between adjacent pieces. For comparison, conventional light-frame timber shear walls and midply wall systems were also tested under the same conditions. Shear walls with edge nail spacing of 150 mm and 100 mm, the midply wall system, and the fabricated CGCLT and NGCLT wall panels exhibited maximum lateral resistances of 6.1 kN/m (100%), 9.7 kN/m (158%), 16.9 kN/m (274%), 29.6 kN/m (482%), and 35.8 kN/m (582%), respectively.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
• /
• pp.204-212
• /
• 2008

본 연구의 목적은 Resilon을 이용한 근관충전시 methacrylate-based root canal sealer와 자기-접착 레진시멘트의 사용에 따른 치근단 미세누출을 비교해 보는 것이다. 70개 단근치를 ProFile NiTi rotary instrument와 GG drill을 이용해 근관성형 하였다. 치근을 4개의 실험군 (n = 15)과 2개의 대조군 (n = 5)으로 분류하여 측방가압법으로 충전하였다 <1군: GP + AH-26, 2군: Resilon + RealSeal primer&sealant, 3군: Resilon + Rely-X Unicem, 4군: Resilon + Biscem> 7일간 1% 메틸렌블루 용액에 침적 후 수직절단하여 치근첨부터 색소의 침투도를 측정하였다. 1 군에서 가장 적은 미세누출값이 측정되었고, 2, 3, 4군간의 통계적 유의성은 없었다. 이번 연구의 결과에 따르면, 자가-접착 레진시멘트는 Resilon을 이용한 근관충전시 sealer로 사용이 가능하리라 생각된다.

• Restorative Dentistry and Endodontics
• /
• 제33권3호
• /
• pp.204-212
• /
• 2008

본 연구의 목적은 Resilon을 이용한 근관충전시 methacrylate-based root canal sealer와 자가-접착 레진시멘트의 사용에 따른 치근단 미세누출을 비교해 보는 것이다. 70개 단근치를 ProFile NiTi rotary instrument와 GG drill을 이용해 근관성형 하였다. 치근을 4개의 실험군 (n = 15)과 2개의 대조군 (n = 5)으로 분류하여 측방가압법으로 충전하였다. <1군: GP + AH-26, 2군: Resilon + RealSeal primer&sealant, 3군: Resilon + Rely-X Unicem, 4군: Resilon + Biscem > 7일간 1% 메틸렌블루 용액에 침적 후 수직절단하여 치근첨부터 색소의 침투도를 측정하였다. 1군에서 가장 적은 미세누출값이 측정되었고, 2, 3, 4군 간의 통계적 유의성은 없었다. 이번 연구의 결과에 따르면, 자가-접착 레진시멘트는 Resilon을 이용한 근관충전시 sealer로 사용이 가능하리라 생각된다.