• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.302-304
• /
• 1998

Self magnetic field in a Bus bar usually degrades the critical current in it. Actually the total critical current of a Bus bar is not the same as the sum of total critical current of each stacked HTS tape. This is due to the self field effects in a bus bar. To reduce the degradations of critical current in a bus bar, we need to analyze the self field distributions in a bus bar. Conceptually, by rearranging the each stacked tapes, the self field effects can be minimized. In this paper, we calculate the self magnetic field distributions across a bus bar analytically, with the variations of the relative angle of the two conductors in a go-and-return pair. As a result, we suggest that the optimum relative angle exist which minimize the self field effect in a bus bar.

• 비파괴검사학회지
• /
• 제34권2호
• /
• pp.119-127
• /
• 2014

An epoxy coating applied to the concrete surface of a containment building deteriorates in hazardous environments such as those containing radiation, heat, and moisture. Unlike metals, the epoxy coating on a concrete liner absorbs and discharges moisture during the degradations process, so it has a different density and volume during service. In this study, acoustic impedance was adopted for characterizing the degradation of a glass-reinforced epoxy coating using the acoustic reflection coefficient (reflectance) on a rough epoxy coating. For estimating the acoustic reflectance on a wavy epoxy coating surface, a probabilistic model was developed to represent the multiple irregular reflections of the acoustic wave from the wavy surface on the basis of the simulated annealing technique. A number of epoxy-coated concrete specimens were prepared and exposed to accelerated aging conditions to induce an artificial aging degradation in them. The acoustic impedance of the degraded epoxy coating was estimated successfully by minimizing the error between a waveform calculated from the mathematical model and a waveform measured from the surface of the rough coating.

• 한국멀티미디어학회논문지
• /
• 제23권9호
• /
• pp.1219-1228
• /
• 2020

In this study, the factors affecting the acceptance intention for level 4-5 of autonomous vehicles were investigated by applying TAM(Technology Acceptance Model). To this end, 332 ordinary persons interested in autonomous vehicle and experienced in driving car were analyzed by using SEM(Structural Equation Modeling). The results showed that self-efficacy and personal innovation had a positive effect on perceived usefulness. On the other hand personal innovation has been shown to have a negative effect on perceived usefulness. Perceived ease of use has a positive effect on perceived usefulness, perceived ease of use and perceived usefulness has a positive effect on acceptance intention. Safety and Privacy has been shown to have a positive effect on trust, trust has a positive effect on acceptance intention. Lastly, autonomous vehicles have a higher impact on their 20s and 30s. The result of this study is expected to be a very useful basic research for the development of target autonomous vehicles, the selection of targets, the direction of corporate marketing strategies, and the preparation of government policies.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.115-120
• /
• 2008

Use of the carbon nanotube is superior to general powder state materials of mechanical and electrical properties. Because its ratio of diameter and length (aspect ratio) is very large, it has been known as a type of ideal nano-reinforcement material. Based on this advantage, the existing carbon black of semiconductive shield materials used in power cables can acquire excellent properties by using a small amount of carbon nanotubes. Thus, we investigated the thermal properties of the carbon nanotube, such as thermal conductivity, specific heat, and DSC (Differential Scanning Calorimetry). We found that a high thermal resistance level is demonstrated by using a small amount of carbon nanotubes. As a result, this tendency confirms high cross-linking density in a new network in which the carbon nanotube between carbon black constitute molecules shows a bond by similar constructive properties.

• Journal of Microbiology and Biotechnology
• /
• 제25권11호
• /
• pp.1960-1965
• /
• 2015

Rabbit hemorrhagic disease virus (RHDV) is highly contagious and often causes fatal disease that affects both wild and domestic rabbits of the species Oryctolagus cuniculus. A highly pathogenic RHDV variant (RHDVa) has been circulation in the Korean rabbit population since 2007 and has a devastating effect on the rabbit industry in Korea. A highly pathogenic RHDVa was isolated from naturally infected rabbits, and the gene encoding the VP60 protein was cloned into a baculovirus transfer vector and expressed in insect cells. The hemagglutination titer of the Sf-9 cell lysate infected with recombinant VP60 baculovirus was 131,072 units/50 μl and of the supernatant 4,096 units/50 μl. Guinea pigs immunized twice intramuscularly with a trial inactivated RHDVa vaccine containing recombinant VP60 contained 2,152 hemagglutination inhibition (HI) geometric mean titers. The 8-week-old white rabbits inoculated with one vaccine dose were challenged with a lethal RHDVa 21 days later and showed 100% survival rates. The recombinant VP60 protein expressed in a baculovirus system induced high HI titers in guinea pigs and rendered complete protection, which led to the development of a novel inactivated RHDVa vaccine.

• Bulletin of the Korean Chemical Society
• /
• 제23권4호
• /
• pp.580-586
• /
• 2002

We investigated the effect of ionic component on crystalline morphology development during isothermal annealing in a sodium neutralized sulfonated poly(ethylene terephthalate) ionomer (Ion-PET) by time-resolved small-angle x-ray scattering (TR-SAX S) using synchrotron radiation. At early stage in Ion-PET, SAXS intensity at a low annealing temperature (Ta = 120 $^{\circ}C)$ decreased monotonously with scattering angle for a while. Then SAXS profile showed a peak and the peak position progressively moved to wider angles with isothermal annealing time. Finally, the peak intensity decreased, shifting the peak angle to wider angle. It is revealed that ionic aggregates (multiplets structure) of several nm, calculated by Debye-Bueche plot, are formed at early stage. They seem to accelerate the crystallization rate and make fine crystallites without spherulite formation (supported by optical microscopy observation). From decrease of peak intensity in SAXS,it is suggested that new lamellae are inserted between the preformed lamellae so that the concentration of ionic multiplets in amorphous region decreases to lower the electron density difference between lamellar crystal and amorphous region. In addition, analysis on the annealing at a high temperature (Ta = 210 $^{\circ}C)$ by optical microscopy, light scattering and transmission electron microscopy shows a formation of spherulite, no ionic aggregates, the retarded crystallization rate and a high level of lamellar orientation.

• Bulletin of the Korean Chemical Society
• /
• 제24권10호
• /
• pp.1485-1489
• /
• 2003

The gelation for di-(2-ethylhexyl) phthalate (DEHP)-plasticized poly(vinyl chloride) was studied by measuring time-resolved small-angle X-ray scattering (SAXS) and a flow of the solutions in test tube. It was found that for the gelation there were three regimes. At Regime I, the solution rapidly changed to a gel, and the SAXS intensity showed a peak and the peak intensity increased, keeping the peak angle constant. Applying the SAXS intensity to the kinetic analysis of the liquid-liquid phase separation, it was revealed that the spinodal decomposition proceeded to develop a periodic length of 29.9 nanometer in size, a hydrogen-bonding-type association in polymer rich phase followed, and then it induced fast gelation rate. At Regime II, the gelation slowly occurred and the SAXS intensity was not observed, suggesting that a homogeneous gel network was formed by a hydrogen-bonding. At regime III, the solution was a homogeneous sol.

• Macromolecular Research
• /
• 제17권4호
• /
• pp.265-270
• /
• 2009

Noble thermosensitive nanoparticles, based on a PNIPAAm-co-AA core and a chitosan shell structure, were designed and synthesized for the controlled release of the loaded drug. PNIPAAm nanoparticles containing a carboxylic group on their surface were synthesized using emulsion polymerization. The carboxylic groups were conjugated with the amino group of a low molecular weight, water soluble chitosan. The particle size of the synthesized nanoparticles was decreased from 380 to 25 nm as the temperature of the dispersed medium was increased. Chitosan-conjugated nanoparticles with $2{\sim}5$ wt% MBA, a crosslinking monomer, induced a stable aqueous dispersion at a concentration of 1mg/1mL. The chitosan-conjugated nanoparticles showed thermo sensitive behaviors such as LCST and size shrinkage that were affected by the PNIPAAm core and induced some particle aggregation around LCST, which was not shown in the NIPAAm-co-AA nanoparticles. These chitosan-conjugated nanoparticles are also expected to be more biocompatible than the PNIPAAm core itself through the chitosan shell structures.

• Journal of Microbiology and Biotechnology
• /
• 제29권12호
• /
• pp.1931-1937
• /
• 2019

The heterologous expression of the Streptomyces natural product (NP) biosynthetic gene cluster (BGC) has become an attractive strategy for the activation, titer improvement, and refactoring of valuable and cryptic NP BGCs. Previously, a Streptomyces artificial chromosomal vector system, pSBAC, was applied successfully to the precise cloning of large-sized polyketide BGCs, including immunosuppressant tautomycetin and antibiotic pikromycin, which led to stable and comparable production in several heterologous hosts. To further validate the pSBAC system as a generally applicable heterologous expression system, the daptomycin BGC of S. roseosporus was cloned and expressed heterologously in a model Streptomyces cell factory. A 65-kb daptomycin BGC, which belongs to a non-ribosomal polypeptide synthetase (NRPS) family, was cloned precisely into the pSBAC which resulted in 28.9 mg/l of daptomycin and its derivatives in S. coelicolor M511(a daptomycin non-producing heterologous host). These results suggest that a pSBAC-driven heterologous expression strategy is an ideal approach for producing low and inconsistent Streptomyces NRPS-family NPs, such as daptomycin, which are produced low and inconsistent in native host.

• Journal of Astronomy and Space Sciences
• /
• 제16권2호
• /
• pp.273-284
• /
• 1999

위성용 star tracker의 국내 개발을 위한 기초 연구의 일환으로 광학계 설계 요소 선정 과정을 연구하였다. 논리적인 광학 요소 선정을 위해 CCD 센서에 결상된 별빛을 관련 전자회로에서 읽고, 처리하는 전 과정을 시뮬레이션하였다. 시뮬레이션으로부터 별의 등급과 성취 가능한 지향 정밀도간의 관계가 구해졌으며, 그 관계로부터 요구되는 star tracker의 지향 정밀도를 만족시키기 위한 최적의 광학요소를 유도하였다. 선정된 광학 요소들은 10 arcsec의 지향 정밀도를 갖는 star tracker의 광학계 설계에 사용되었다.