• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.429-429
• /
• 2012

To investigate the gettering effect of B-doped n-type monocrystalline silicon wafer, we made the p-n junction by diffusing boron into n-type monocrystalline Si substrate and then oxidized the boron doped n-type monocrystalline silicon wafer by in-situ wet and dry oxidation. After oxidation, the minority carrier lifetime was measured by using microwave photoconductance and the sheet resistance by 4-point probe, respectively. The junction depth was analyzed by Secondary Ion Mass Spectrometry (SIMS). Boron diffusion reduced the metal impurities in the bulk of silicon wafer and increased the minority carrier lifetime. In the case of wet oxidation, the sheet resistance value of ${\sim}46{\Omega}/{\Box}$ was obtained at $900^{\circ}C$, depostion time 50 min, and drive-in time 10 min. Uniformity was ~7% at $925^{\circ}C$, deposition time 30 min, and drive-in time 10 min. Finally, the minority carrier lifetime was shown to be increased from $3.3{\mu}s$ for bare wafer to $21.6{\mu}s$ for $900^{\circ}C$, deposition 40 min, and drive-in 10 min condition. In the case of dry oxidation, for the condition of 50 min deposition, 10 min drive-in, and O2 flow of 2000 SCCM, the minority carrier lifetime of 16.3us, the sheet resistance of ${\sim}48{\Omega}/{\Box}$, and uniformity of 2% were measured.

• 한국콘텐츠학회논문지
• /
• 제20권9호
• /
• pp.380-388
• /
• 2020

본 연구는 서비스 사업의 한 방법의 일환인 드라이브 스루에 대한 소비자의 인식 유형에 관한 주관성 연구를 통하여서 드라이브 스루라는 서비스의 방식이 업체 경영자의 관점에서 보다 이용자의 관점에서 어떤 효과가 있는지를 파악하고 보다 효율적인 운영을 위해서 드라이브 스루 업체 이용에 대한 이용자의 주관적 관점을 분석하고자 Q-방법론을 선택했고 탐색적 연구를 실행하였다. 이를 위해서 진술문 카드를 응답자가 직접 분류하는 방법으로 분석 작업이 실행되었고 Q 모집단을 선별하여 구성하며 이를 통해 진술문을 작성한 후에 P샘플을 선정하여 분류작업을 거쳐 얻어지는 Q-sort를 PC QUANL 프로그램을 통해서 Q요인분석을 통해서 분석하였다. 분석 결과 총 3가지의 유형으로써 분류가 되었는데, 제1유형[(N=14): 가격대비 편리추구형], 제2유형[(N=4): 시간대비 효율추구형], 제3유형[(N=2): 신속추구형] 등으로서 유형마다 각각의 특징이 있는 것으로 나타났다. 이런 분석을 통하여 검출된 각각의 주관적 의견을 통해 추후에 다양한 연구의 밑거름이 될 것이라 믿으며 향후 드라이브 스루 마케팅 수립과 미진한 부분의 개선 방향에 있어 참고자료로 충분히 활용될 수 있을 것으로 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.21-23
• /
• 1988

Microstepping drive of 3 phase VR step motor with 2 phase exciting scheme is proposed. Considering the presence of harmonic components of inductance, the current reference is calculated. The experimental results show high accuracy of divided step position and resonance or instability in operating range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.45-48
• /
• 1987

In applications of step-motor, the requirements of small-size and strong-power gave birth to feed-back drive to the maximum efficiency and complete damping. In this paper, a new scheme that determines switching times from sensed values of position and speed is presented for simple bang-bang type drive circuit. The optimal values of each phase switching times are obtained using conjugate gradient method.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.168-171
• /
• 2010

본 논문에서는 GaN HEMT 소자를 이용한 고출력 고효율 특성을 가지는 광대역 SSPA의 개발을 다루고 있다. 개발한 SSPA는 8W 급과 15W 급의 GaN HEMT 소자를 사용하여 Pre-Drive 증폭단을 구성하였으며, Drive 증폭단은 50W/150W급 GaN HEMT 소자를 직/병렬구조로 사용하였다. Main 증폭단은 4-way 분배기와 결합기를 이용한 Balanced Structure를 적용하여 높은 출력을 구현하였으며, 안정적인 동작을 위하여 음(-)전원 제어 회로와 출력신호 검출 회로를 포함하고 있다. 제작된 SSPA의 사용가능 대역은 2.9GHz~3.3GHz로 단일전원을 사용하고 있으며 100us 펄스 폭, 10% Duty Cycle 조건에서 60dB의 전압이득, 1kW 출력과 약 28% 효율 특성을 가지는 것으로 측정되었다. 본 논문에서 개발한 SSPA는 S-대역을 사용하는 레이더시스템의 송신단에 적용될 수 있다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권3호
• /
• pp.64-69
• /
• 2001

Energy recovery in the regenerative region is very important when SRM is used in traction drive, This is to reduce en-ergy loss during mechanical braking and/or to have a high efficiency drive during braking To control excitation voltage in motor operation and regenerative voltage in the generator operation in the SRM multi-level voltage control is effective The paper sug-gests multi-level inverter which is useful for motoring and regenerative operation in SRM

• Journal of Power Electronics
• /
• 제6권2호
• /
• pp.121-130
• /
• 2006

This paper presents the performance and efficiency of a drive system incorporating a switched-reluctance motor (SRM) with input power factor correction (PFC). The proposed system consists of a PFC, bi-directional converter, an inverter, and a SRM operating as based voltage source drives (VSD). First, theoretical analysis is made for each identified mode of operation in the drive system. This is followed by comparing the performance of the SRM drive system with and without a PFC circuit. The losses are also calculated for both systems and overall efficiency. Experimental results are presented to prove the theoretical analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.334-336
• /
• 2007

This paper proposes a novel RGB-LED (light emitting diode) backlight system, for 32" LCD TVs, accompanied by a new X-Y Channel drive method in which its row and column switches control the individual division screen. This proposed driving method is able to produce division drive effects such as image improvement and reduced power consumption. Not only that, the number of converter needed in this method, that is 1 with $4^*$(m+n) switches, is much fewer than that of cluster drive method, that is $4^*(m^*n)$.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권3호
• /
• pp.112-118
• /
• 2001

In the near future, the voltage of power system for passenger vehicle will be changed to 42V from existing 14V./ Because of increasing power and voltage ratings used in the vehicle the motor drive system has high switching dv/dt and it generates electromagnetic interference (EMI) To solve these problems multi-level inverter system may be used The feature of multi-level inverter is the output voltage to be synthesized from several levels of voltage Because of this feature high switching dv/dt and EMI can be reduced in the multi-level inverter system But as the number of level is increased manufacturing cost is getting expensive and system size is getting large. Because of these disadvantages the application of multi-level inverter has been restricted only to high power drives. The method to reduce manufacturing cost and system size is to integrate circuit of multi-level inverter into a few chips But isolated power supply and signal isolation circuit using transformer or opto-coupler for drive circuit are obstacles to implement the integrated circuit (IC) In this paper a drive circuit of 4-level inverter suitable for integration to hybrid or one chip is proposed In the proposed drive circuit DC link voltage is used directly as the power source of each gate drive circuit NPN transistors and PNP transistors are used to isolate to transfer the control signals. So the proposed drive circuit needs no transformers and opto-couplers for electrical isolation of drive circuit and is constructed only using components to be implemented on a silicon wafer With th e proposed drive circuit 4- level inverter system will be possible to be implemented through integrated circuit technology Using the proposed drive circuit 4- level inverter system is constructed and the validity and characteristics of the proposed drive circuit are proved through the experiments.

• 한국재료학회지
• /
• 제8권5호
• /
• pp.470-473
• /
• 1998

Co/Ti 이중막을 급속열처리하여 형성한 $CoSi_{2}$에 $As^+$을 이온주입한 후, 500~$1000^{\circ}C$에서 drive-in 열처리하여 매우얇은 $n_{+}$ p접합의 다이오드를 제작하고 I-V 특성을 측정하였다. $500^{\circ}C$에서 280초 drive-in 열처리하였을 때, 50nm정도의 매우 얇은접합이 형성되었고, 누설전류가 매우 낮아 가장 우수한 다이오드 특성을 나타내었다. 특히, Co 단일막을 사용한 다이오드에 비해 누설전류는 2order 이상 낮았으며, 이는 $CoSi_{2}$Si의 계면이 균일하였기 때문이다.