Simulation and Experimentals of a Bi-Directional Converter with Input PFC on SRM System

  • Maged Maged N.F. (Electronics Research Institute, Cairo, Egypt)
  • Published : 2006.04.01

Abstract

This paper presents the performance and efficiency of a drive system incorporating a switched-reluctance motor (SRM) with input power factor correction (PFC). The proposed system consists of a PFC, bi-directional converter, an inverter, and a SRM operating as based voltage source drives (VSD). First, theoretical analysis is made for each identified mode of operation in the drive system. This is followed by comparing the performance of the SRM drive system with and without a PFC circuit. The losses are also calculated for both systems and overall efficiency. Experimental results are presented to prove the theoretical analysis.

Keywords

References

  1. R. Krishnan and S. Srinivasan, 'Topologies for Uninterruptible Power Supplies,' IEEE International Symposium on Industrial Electronics, Budapest, Hungary, June 1-3, 1993
  2. R. Krishnan and S. Lee, ' Uninterruptible Motor Drives: A Case Study With Switched Reluctance Motor Drives,' IEEE IECON Conf. Italia, Sept.1994
  3. J. Lee, G. Moon, and M. Youn 'Design of a Power Factor Correction Converter based on Half Bridge Topology' IEEE Transactions on Industrial Electronics Vol. 46, No. 4, Aug. 1999
  4. C. Klumpner, P. Nielsen, I. Boldea, and F. Blaabjerg 'By new solutions for a low-cost power electronic building block for matrix converters' IEEE Transactions on Industrial Electronics, Vol. 49, No. 2, April 2002
  5. T. Miller, 'Switched Reluctance Motors and their Control', Magna Physics Publishing and Clarendon Press-Oxford, 1993
  6. M. Ehsani, J. Bass, T. Miller, and R. Steigerwald, 'Development of a unipolar converter for variable reluctance motor drives', IEEE Transactions on Industry Applications, Vol.IA-23, No.3, May/June 1987
  7. S. Vukosavic, and V. Stefanovic, 'SRM inverter topologies: A comparative evaluation', IEEE Transactions on Industry Applications, Vol.27, No.6, Nov/Dec. 1991
  8. K. Ohyama, M. N. F. Nashed, K. Aso, H. Fujii, and H. Uehara 'Design Using Finite Element Analysis of Switched Reluctance Motor for Electric Vehicle' Asian Electric Vehicle Conf.-4, Nov. 26-28, Osaka, Japan, 2005
  9. N. Mohan, T. Undeland and W. Robbins, 'Power Electronics: Converters, Applications, and Design,' John Wiley & Sons, Inc., 1989
  10. P. Materu, and R. Krishnan, 'Estimation of switched reluctance motor losses', IEEE Transactions on Industry Applications, Vol. 28, No. 3, May/June 1992